NI Semiconductor Test System Development Software 22.0.0 x64Win10 64bitEng NI-STS半导体测试系统开发软件22.0.0
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Semiconductor Test System Development Software 22.0.0 x64Win10 64bitEng NI-STS半导体测试系统开发软件22.0.0
半导体测试系统开发软件
半导体测试系统软件可帮助您开发、执行、调试和部署半导体测试系统软件(STS)应用。
半导体测试系统开发软件为STS提供了一套测试管理和代码模块开发工具。使用该软件，您可以定义引脚图、配置数字pattern、创建测试代码模块、自定义操作界面、优化并行测试效率（PTE）、以标准测试数据格式（STDF）报告数据，以及维护和校准测试系统。
发布日期：2022/7/1
包含的版本：2022完整版，版本号22.0.0
受支持的操作系统：
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
校验和：
文件大小: 26580822016 字节 (24.76 GB)
修改日期: 2022-07-01 09:49
MD5: a319bf1babfb1e39d944e3ecafa7101c（重复一致）
SHA1: 33389d8bb31473f131a34428e3ca5ea4d9b546ff
SHA256: 2669308fd340c56010b950aa6b15aeb2bd41f962977c83ae6b4bcff3d8291308
CRC32: db8e87b4
百度网盘与NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
22.0版本自述文件暂未更新，参考21.0版本
STS Development Software 21.0 ReadmeOctober 2021This file contains important information about STS Development Software 21.0, including installation instructions and new features. STS Development Software is a collection of NI software for developing, executing, and debugging test programs on a non-STS computer.Included ComponentsSystem RequirementsSupported Controllers and Operating SystemsInstallation ConsiderationsInstallation InstructionsMicrosoft Visual Studio SupportProduct Security and Critical UpdatesNew FeaturesWhat's ChangedKnown Issues and Bug FixesAccessing the DocumentationUsing NI Software with Microsoft Windows 10Unsupported Windows Operating SystemsLegal InformationIncluded ComponentsSTS Development Software 21.0 includes the following major components:
[*]STS Development Software 21.0
[*]TestStand 2020 f1
[*]NI TestStand Semiconductor Module™ 2021 Q4 (TSM)
[*]LabVIEW 2020 SP1 f1
[*]LabVIEW 2020 SP1 f1 Run-Time Engine
[*]LabVIEW 2021 Run-Time Engine
[*]NI-Digital Pattern Driver 21.0.0
[*]NI-DCPower 21.3.0
[*]NI-SCOPE 20.7.0
[*]NI-Sync 20.0.0
[*]NI-RFPM 20.6.1
[*]NI RFmx 21.3.0
[*]NI-RFSA 21.0.1
[*]NI-RFSG 21.0.1
[*]STS Auxiliary Mixed Signal Tools 20.0.0
[*]STS Auxiliary RF Tools 21.0.0
[*]TSM RF Steps 21.0.0
[*]STS Handler and Prober Drivers 20.0.0
[*]STS Maintenance Software 21.0.0
System RequirementsSTS Development Software 21.0 has the following requirements:
[*]2.3 GHz 8-Core Intel Xeon processor (or equivalent)
[*]At least 100 GB of disk space
[*]At least 12 GB RAM (NI recommends 24 GB RAM)
Supported Controllers and Operating SystemsSTS Development Software 21.0 supports the following controllers:
[*]PXIe-8880
[*]PXIe-8881
STS Development Software 21.0 supports the following operating system:
[*]Windows 10 IoT Enterprise LTSC 2019 (64-bit)
NoteSTS Development Software 21.0 does not support certain versions of Windows 10. Refer to Editions of Windows 10 Supported by NI Software for more information.NoteRefer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.Installation ConsiderationsNI offers two installation paths for STS software—installing STS Software through the STS Version Selector and installing STS Development Software through NI Package Manager.NI recommends installing STS Development Software through NI Package Manager if you are using a non-STS computer and do not need to switch among versions of STS software. Use STS Development Software 21.0 to develop, run, and debug STS test programs on a non-STS computer without access to NI instruments. When test program development is complete, transfer the test program to an STS from which you will deploy the test program into a production environment.NoteIf you install STS Development Software 21.0 through NI Package Manager, you cannot downgrade your software version. NI does not recommend updating components of STS Development Software on the non-STS computer. The set of software you use to develop an STS test program must match the set of software on the STS from which you will deploy the test program.If you need to switch among versions of STS software on a non-STS computer, install through the STS Version Selector. If you used a mechanism other than the STS Version Selector 19.0.0 or later to install any NI software on the STS or non-STS computer, you must reimage the computer before installing the latest version of the STS Version Selector. Refer to the STS Software 21.0 Readme for more information about installing STS Software through the STS Version Selector.Installation InstructionsDownload the STS Development Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager.Notes
[*]If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
[*]Use the serial number that is included with your software to activate STS Development Software. For more information on STS Development Software activation, refer to NI Software Activation.
[*]You must restart the computer after you activate an STS software version.
Microsoft Visual Studio SupportIf you are using NI .NET Class Libraries, .NET Framework 4.0 (minimum) is required. The NI .NET Class Libraries can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.For information about versions of the .NET Framework and the drivers each supports, refer to NI .NET Support.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.Spectre and MeltdownRefer to Meltdown and Spectre - Processor Speculative Execution Vulnerabilities (Windows) for more information about addressing Spectre and Meltdown issues.New FeaturesSTS Software 21.0 adds the following major new features:New Hardware Support
[*]PXIe-6569—Added support for the PXIe-6569 high-speed serial instrument.
[*]PXIe-4137 (40 W) Source Measure Unit (SMU)—Added support for the high power (40W/10 A, pulsed) SMU version of the PXIe-4137.
[*]PXIe-4190—Added support for the PXIe-4190 LCR. Support applies only to STS models with the CX configuration.
New and Improved Test Program Development and Debugging
[*]Added support for extended continuity test frequency range up to 21.5 GHz on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem.
[*]RF Steps added the following new steps and examples:
[*]The WLAN Test - 8 GHz example sequence demonstrates how to perform error vector magnitude (EVM) measurements with noise compensation on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem.
[*]The S-Parameter Test - 6 GHz example sequence demonstrates how to publish the S-parameter magnitude only or S-parameter magnitude and phase.
[*]The NR test example sequence demonstrates how to use the TSM RF Steps to implement NR TXP measurements.
[*]RF Steps adds the following new measurements:
[*]NR ACP measurements—Perform customized definition of measurement offset and integration bandwidth.
[*]WLAN OFDM ModAcc measurements—Support vector averaging type to reduce noise floor of a signal while retaining the signal spectrum.
[*]WLAN measurements—Support the IEEE 802.11be standard.
[*]The STS Auxiliary RF Tools provides the enhanced Golden Units Calibration Tool for calculating and updating the correlation offsets based on golden DUT, or known good unit, measurements. The enhanced features support multiple sites. You can calibrate golden units, retry failed golden units, check the calibration interval, and specify the minimum pass number of the golden units per site.
[*]The STS Auxiliary RF Tools provides the enhanced STS RF Switch Control Panel plug-in for InstrumentStudio, which allows you to configure and connect the RF subsystem internal switches and paths to perform RF measurements. The enhanced features expand support on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem, extend the measurement frequency up to 21.5 GHz, and support the PXIe-5841 with STS-5534 as an STS RF subsystem.
What's ChangedSTS Development Software 21.0 includes updates to the following major components.NoteThis is not an exhaustive list of updated products in STS Development Software.
Previous VersionCurrent Version
LabVIEW 2020 SP1 Run-Time EngineLabVIEW 2021 Run-Time Engine
STS Maintenance Software 20.1.0STS Maintenance Software 21.0.0
NI-Digital Pattern Driver 20.6.2NI-Digital Pattern Driver 21.0.0
NI-DCPower 20.7.0NI-DCPower 21.3.0
NI RFmx 20.7.1NI RFmx 21.3.0
NI-RFSA 20.7.1NI-RFSA 21.0.1
NI-RFSG 20.7.1NI-RFSG 21.0.1
STS Development Software 21.0 Auxiliary ComponentsSTS Development Software 21.0 changes the following auxiliary components.NoteThis is not an exhaustive list of changed auxiliary components in STS Development Software.
Previous VersionRenamed/Current Version
STS Auxiliary RF Tools 20.1.0STS Auxiliary RF Tools 21.0.0
TSM RF Steps 20.1.0TSM RF Steps 21.0.0
Known Issues and Bug FixesYou can access the known issues list and bug fixes list online. Refer to the private NI STS Technical Support Community, located at https://forums.ni.com/t5/NI-STS-Technical-Support/gp-p/5300, for an up-to-date list of known issues and bug fixes in STS Development Software 21.0. You can work directly with NI Services personnel contracted on your project to request to be added to the NI STS Technical Support Community.Accessing the DocumentationSelect Start»National Instruments»STS Help to access the STS Help, which includes information about STS Development Software 21.0.If you open help files directly from the <Program Files>\National Instruments\STS\Documentation\Help directory, NI recommends that you open STSDocumentation.chm first because this file is a collection of help files and provides a complete table of contents and index.STS manuals are available as PDFs in the <Program Files>\National Instruments\STS\Documentation\Manuals directory. You must have Adobe Acrobat Reader installed to view the PDFs.Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.Unsupported Windows Operating SystemsSTS Development Software no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.Legal InformationCopyright© 2017–2021 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.378143F-01
百度网盘与NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
STSDS22.0.txt (616 Bytes, 下载次数: 0, 售价: 30 元) 百度网盘与NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
STSDS22.0.txt (616 Bytes, 下载次数: 0, 售价: 30 元)
页:
[1]