[NI驱动程序] NI-SCOPE .NET Class Libraries 1.1.1 Win32/64Eng NI示波器.NET驱动1.1.1

NI-SCOPE .NET Class Libraries1.1.1.txt (560 Bytes, 下载次数: 0, 售价: 10 元)

2022-11-21 16:00 上传

点击文件名下载附件

Note    NI-SCOPE .NET Libraries will not install if the Microsoft .NET Framework 3.5 is not installed. The installer also gives a warning if the NI-SCOPE 3.5 or later instrument driver is not installed.

• Pentium 600 MHz or equivalent processor
• Microsoft Windows XP: 128 MB RAM or Microsoft Windows Vista: 512 MB
• Microsoft Internet Explorer 6.0 or later
• NI-SCOPE 3.5 driver or later—If you have an earlier version of NI-SCOPE installed, refer to http://www.ni.com/idnet to download the correct version.
• Microsoft .NET Framework 3.5
• Microsoft Windows Vista/XP
  

• Pentium 4 or equivalent processor
• Microsoft Windows XP: 256 MB RAM or Microsoft Windows Vista: 512 MB
• A screen resolution of 1024 x 768
• Microsoft Windows Vista/XP with all available critical updates and service packs installed

  Note    You can use NI-SCOPE .NET class libraries on a Windows Vista 64-bit operating system; however, applications that use NI-SCOPE .NET assemblies on the Vista 64-bit version must have the platform target set to x86.

• Microsoft Visual Studio 2008 with all service packs installed—required only for design-time support
  

Note    This does not apply to NationalInstruments.Common.dll. NationalInstruments.Common.dll uses a publisher policy file to redirect applications to always use the newest version of NationalInstruments.Common.dll installed on the system, for each version of the .NET Framework. NationalInstruments.Common.dll is backward-compatible.

Note    If Visual Studio 2008 is installed, you can access the NI-SCOPE components from the Measurement Studio group on the Visual Studio Toolbox. Select View»Toolbox and expand the Measurement Studio group to access the NI-SCOPE components.

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add/Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-SCOPE .NET 1.1.1 Class Library from the list of installed NI software.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• The NI-SCOPE .NET class libraries do not support these traditional NI-DAQ devices: 5620, 5621, 5102, 5911, and 5112.
• On a machine with Windows Vista, the NI-SCOPE .NET Toolbox items are visible in Visual Studio only when Visual Studio is opened with Administrator privileges. To work around this issue, you can add the NI-SCOPE .NET components to the Visual Studio Toolbox by completing the following steps in Visual Studio:
  
  • Create a new project.
  • Right-click on the Toolbox and select Add Tab.
  • Right-click on the tab that you created and select Choose Items.
  • Click the Browse button and navigate to the [INSTALLDIR]\DotNET\Assemblies\Current\ directory, where [INSTALLDIR] is the directory where you installed NI-SCOPE .NET class libraries.
  • Select NationalInstruments.ModularInstruments.Scope and NationalInstruments.ModularInstruments.TClock and click Open.
    
• If you have an NI-SCOPE device that has only one channel, such as NI PXIe-5622, you must remove the additional channel, Channel "1", added by the ScopeSession configuration wizard during design-time on the ScopeSession. Click on the Channels property from the property grid for the ScopeSession object and set the number of Channels to 1 in the Channels Collection Editor.