LabVIEW 2009 Embedded Module for ARM Microcontrollers Win32Eng/Kor LabVIEW用于ARM微控制器嵌入式模块EMBARM2009
LabVIEW 2009 Embedded Module for ARM Microcontrollers Win32Eng/Kor LabVIEW用于ARM微控制器嵌入式模块EMBARM2009Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
发布日期：2009/06/10
包含的版本：2009
受支持的操作系统
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 or later
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
语言：英语/韩语
应用程序位数：32位
校验和：
ENG英文版：
文件大小: 1097132576 字节 (1.02 GB)
修改日期: 2022-03-25 06:04
MD5: fb80a3f6f91bed13d555dd6e27090469
SHA1: f7080cb9a7fddf536066f7f55acafdf4c45ad26a
SHA256: ca907dd948177547a57ca0e0591fcc3b6165c0d26ad4b291805acceda380c575
CRC32: c0dacdd0
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
KOR韩语版：
文件大小: 1103272480 字节 (1.03 GB)
修改日期: 2022-03-25 06:04
MD5: 0518a745ad62c5ef40a0cad8e2cacbf2
SHA1: 37d3c8f68b3fec8d777284b98060606137c9a77e
SHA256: 30632e3c579ec36c8a36a7f5e19673dd70ec4ab1c4dc71f872a04d1d9aa83486
CRC32: b5523916
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
LabVIEW 2009 Embedded Module for ARM Microcontrollers ReadmeJuly 2009This file contains important information about the LabVIEW Embedded Module for ARM Microcontrollers.InstallationYou must install the RealView Microcontroller Development Kit and activate the Keil μVision License ID Code (LIC) before you install the Embedded Module for ARM Microcontrollers. You can find installation instructions Embedded Module for ARM Microcontrollers with activation instructions in the Getting Started with the LabVIEW Embedded Module for ARM Microcontrollers manual, which is available in your module software kit and online at ni.com/manuals.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Embedded Module for ARM Microcontrollers.Bug FixesThe following table contains the IDs and titles of a subset of issues fixed in LabVIEW 2009 Embedded Module for ARM Microcontrollers. This table is not an exhaustive list of issues fixed in the current version of the Embedded Module for ARM Microcontrollers. If you have a CAR ID, you can search this list to validate the issue has been fixed.
IDLegacy IDDescription
154759–Missing Feedback Node in LabVIEW ARM
137499–ARM and shipping example documentation: CAN_Loopback.lvproj, straight through serial cable needed to run, not null modem cable
162865–ARM 1.1, Old Memory Access.xml in place after upgrading from ARM 1.0 to 1.1
141720–RTFIFO VIs for embedded targets link to the Real-Time Module RTFIFO.llb
169050–PWM pins do not toggle with MCB2300 Generic I/O
133575–Adding a second needle to a dial instrument in LV 8.6/ARM 1.1 causes a compile error in uVision.
136537–Link errors with fixed point
130195–Ring controls cause linker errors
130644–TCP example on MCB2300 fails to build with Generate C function calls enabled in the build specifications
118495–Enabling Optimize subVI calls in build specifications sometimes causes the build to fail
388533IR9ELO9Call Chain function cannot be used with Timed Loops
Important InformationCopyright© 2009 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]