LabVIEW 2024 Q1 FPGA Module Win11 64bitEng LV2024Q1FPGA模块24.1.0英文版64位
LabVIEW 2024 Q1 FPGA Module Win11 64bitEng LV2024Q1FPGA模块24.1.0英文版64位NI LabVIEW FPGA模块可帮助您开发和调试自定义硬件逻辑，并部署到NI FPGA硬件上。
LabVIEW FPGA是LabVIEW的一个软件附件，您可以通过高度集成的开发环境、IP库、高保真模拟器和调试功能，更高效地设计基于FPGA的系统。您可以创建FPGA VI，将I/O直接访问与用户定义的LabVIEW逻辑相结合，为数字协议通信、硬件在环仿真和快速控制原型等应用定义自定义硬件。虽然LabVIEW FPGA模块包含许多内置信号处理程序，但您也可以集成现有的硬件描述语言（HDL）代码以及第三方IP。
FPGA从2018版开始，提供64位版本和32位版本，之前的则只有32位版本。64位版本的，仅有英文版。32位版本的，则通常会有英文版、日文版、中文版等。本论坛大部分的日文版不提供下载（有少数几个没有找到中文版的有提供日文版）。部分年代版本的，则没有中文版的资源，请使用英文版。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2024 Q1 FPGA Module
发布日期：2024/1/22
包含的版本：2024Q1完整版，版本号24.1.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
校验和：
文件大小: 1060689920 字节 (1011.55 MB)
修改日期: 2024-01-23 09:48
MD5: 603ea54fbae689e1c0ffb8ed0f160ac2
SHA1: 7f2c7804872d4808d3f5f3173f0a776276b2c24c
SHA256: b9f8950a2f8da24cf62e0df1a7328a04c720e536fab6c134efb603ebd859b2ad
CRC32: 2bdb8d1e
百度网盘和NI官方下载地址：
请注册登录视觉论坛会员，购买附件查看
2024Q1版未更新自述说明，参考2023Q1版
LabVIEW 2023 Q1 FPGA Module ReadmeJanuary 2023This file contains installation instructions and compatibility information for LabVIEW 2023 Q1 FPGA Module.You can find more release information on ni.com.
[*]LabVIEW FPGA Module Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
[*]LabVIEW FPGA Module Documentation: New features, behavior changes, and other documentation
System RequirementsInstallation InstructionsProduct Security and Critical UpdatesFPGA Module (64-Bit)Upgrade and Compatibility IssuesAccessing the DocumentationFinding ExamplesAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 11Unsupported Windows Operating SystemsSystem RequirementsFPGA Module System RequirementsThe development computer is a PC or NI PXI/PXI Express system on which you install LabVIEW and the FPGA Module. You can also install the Xilinx compilation tools on your development computer to compile LabVIEW FPGA VIs locally. However, if the FPGA design or target requires more than 2 GB of memory, NI recommends you install the Xilinx compilation tools on a separate computer. This computer is referred to as the remote compile worker.Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.The development computer must meet the following system requirements:
[*]LabVIEW 2023 Q1 Full or Professional Development Systems
[*]1.2 GHz Pentium processor or equivalent
[*]3 GB of additional disk space
[*]Memory1:
[*]At least 3 GB of RAM for Virtex-5 and earlier FPGA targets
[*]At least 4 GB of RAM for Virtex-6 and later FPGA targets
[*]One of the following operating systems:
[*]Windows 11
[*]Windows 10
[*]Windows Server 2022
[*]Windows Server 2019
[*]Windows Server 2016
[*]NI FPGA device
[*]Device driver software—To program most devices with the LabVIEW FPGA Module, install the device driver software. Refer to the hardware documentation for requirements for a specific device.
1 Memory requirements vary according to both the FPGA target and the FPGA VI you create for that target.Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.FPGA Compile Farm Server System RequirementsIf you install the FPGA Compile Farm Server on a separate computer, you can configure that computer to be a remote compile farm server. If you install the Xilinx compilation tools on a separate computer, you can configure that computer to be a remote compile worker.Refer to the Setting Up a Remote Compile Farm Server or Compile Worker section of this document for information about setting up and using a local or remote compile farm server or compile worker. Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.You can use either a Windows or Linux computer as a compile worker. Refer to the Xilinx Compilation Tools Readme for information about the minimum system requirements.The remote compile farm server must meet the following minimum system requirements:
[*]35 MB of disk space
[*]1 GB RAM
[*]One of the following operating systems:
[*]Windows 11
[*]Windows 10
[*]Windows Server 2022
[*]Windows Server 2019
[*]Windows Server 2016
[*]Web browser that supports Microsoft Silverlight for accessing compile job queues via the NI Web-based Configuration & Monitoring Service FPGA Compile Farm Console
Installation InstructionsThis section provides information about installing the FPGA Module and related components.NoteIf you are upgrading from a previous version of LabVIEW, you must install the LabVIEW 2023 Q1 FPGA Module before mass-compiling existing FPGA VIs. Otherwise, some FPGA-specific VIs might have mutation issues.Installing the FPGA Module on a Development ComputerDownload the FPGA Module installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.To install LabVIEW and the FPGA Module using the LabVIEW Platform media, complete the following steps:
[*]Log in as an administrator or as a user with administrative privileges.
[*]Insert the LabVIEW Platform media. To request additional LabVIEW Platform media, refer to the NI website. If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchases to install this product.
[*]Follow the instructions on the screen to install and activate the following software in this order:
[*]LabVIEW
[*]FPGA Module
[*](Optional) LabVIEW Real-Time Module—Use the LabVIEW Real-Time Module to program the real-time OS on NI PXI, NI PXI Express, NI CompactRIO, and NI Single-Board RIO devices. You have a temporary license for this product.
[*]Xilinx Compilation Tools—Install these compilation tools on the development computer if you want to compile your LabVIEW FPGA VIs locally. You must install these tools on your development computer if you plan to use the Configure Component-Level IP wizard, configure the IP Integration Node, incorporate Xilinx IP, or use third-party simulation. Refer to your hardware documentation for information about the FPGA chip in your device and install the appropriate set of tools. Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.
[*]Xilinx Compilation Tools for Windows—Install these compilation tools if you will compile your FPGA VIs on a Windows computer. The recommended compilation tool for Windows is Vivado 2021.1. ISE Compilation tools are NOT supported on Windows 10.
NoteTo configure the IP Integration Node, or use the Configure Component-Level IP wizard on Virtex-II devices, you also must install the Xilinx Compilation Tool for ISE 14.7. Xilinx IP and simulation exports are not supported on Virtex-II FPGA devices.[*](Optional) FPGA Compile Farm Server—Use the FPGA Compile Farm Server to distribute FPGA VI compile jobs across multiple remote computers.
NoteUse the LabVIEW FPGA Compile Cloud Service to increase the development efficiency by offloading compile jobs to multiple computers in a cloud environment.
[*]Device Driver—Device drivers contain driver software for most FPGA targets. Refer to your FPGA target hardware documentation for information about additional or different device drivers you need.
In addition to installing program files and documentation in the LabVIEW directory, the installer also puts files from Xilinx in the x:\NIFPGA directory, where x is the drive on which you installed LabVIEW. The FPGA Module uses these files to compile FPGA VIs into code that runs on an FPGA target.Setting Up a Remote Compile Farm Server or Compile WorkerYou can use the LabVIEW Platform media to install the FPGA Compile Farm Server to offload compiles to dedicated computer. You must install the FPGA Compile Farm Server separately on any remote machine that you want to use to manage your compilations. Also, you must install the Xilinx compilation tools on any machine that you want to use as a remote compile worker. Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.
[*]Windows—Visit ni.com/info and enter the Info Code FPGAkb1rcs for information about setting up the FPGA compile farm server on a remote computer.
[*]Linux—Refer to the FPGA Module Xilinx Compilation Tools for Linux Readme for information about setting up a remote compile worker.
NI also offers the LabVIEW FPGA Compile Cloud Service to increase the development efficiency by offloading compile jobs to multiple computers in a cloud environment. Visit ni.com/trycompilecloud for information about the LabVIEW FPGA Compile Cloud.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.FPGA Module (64-Bit)The FPGA Module (64-bit) provides access to more memory than the FPGA Module (32-bit) can provide. The FPGA Module (64-bit) is available in English only.Supported HardwareVisit FPGA Target Support for the LabVIEW FPGA Module 64-bit for information about the NI hardware devices supported by the FPGA Module.You cannot use an unsupported device with the FPGA Module (64-bit) or run example VIs that require an unsupported device in the FPGA Module (64-bit). Refer to the specific hardware documentation for more information about compatibility with the FPGA Module (64-bit).Upgrade and Compatibility IssuesIf you upgrade from the LabVIEW 2019 FPGA Module or later to the LabVIEW 2023 Q1 FPGA Module, you might encounter the following compatibility issues:Vivado Version Upgrade—The Vivado compilation tool version is upgraded from 2019.1 to 2021.1. The following are the changes and compatibility issues:
[*]UHD-SDI Audio is no longer supported on targets with Xilinx Kintex-7, Virtex-7, Zynq, and Zynq UltraScale+ series FPGA.
[*]DSP48 Macro has been renamed to DSP Macro.
[*]The following functions are no longer available on the Xilinx IP palette:
[*]Color Correction Matrix
[*]Color Filter Array Interpolation
[*]Gamma Correction
[*]Image Enhancement
[*]RGB to YCrCb Color-Space Converter
[*]Video On Screen Display
[*]YCrCb to RGB Color-Space Converter
[*]If you open a VI saved in a previous version of LabVIEW that contains an IP Integration Node or Xilinx IP node, complete the following steps to regenerate or reconfigure files.
IP Integration NodeXilinx IP Node
[*]Regenerate support files for the IP by selecting Tools»FPGA Module»Regenerate IP Integration Node Support Files from LabVIEW and following the on-screen instructions.NoteIf LabVIEW fails to update all support files, re-add the IP Integration Node to the VI and generate the support files for the IP Integration Node.
[*]If the IP Integration Node contains Xilinx Vivado IP configuration (.xci) files, continue with the following steps:
[*]Regenerate the Xilinx Vivado IP configuration (.xci) files in the latest Xilinx compilation tools for Vivado.
[*]Re-add the configuration files to the IP Integration Node.
[*]Re-add the IP Integration Node to the VI.
[*]Generate the support files for the IP Integration Node.
[*]Regenerate support files for the Xilinx IP node by selecting Tools»FPGA Module»Regenerate IP Integration Node Support Files from LabVIEW and following the on-screen instructions.
[*]Verify the behavior of the Xilinx IP node.
[*]Reconfigure the Xilinx IP node if its behavior has changed.
Upgrading the FPGA Module requires you to upgrade to a new version of the Xilinx compilation tools. This upgrade can change the timing or resource utilization characteristics of FPGA VIs you developed in previous versions or cause these VIs to fail to compile. NI recommends that you test all FPGA designs after upgrading.
Accessing the DocumentationRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the FPGA Module.Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.Using NI Software with Microsoft Windows 11Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.Unsupported Windows Operating SystemsLabVIEW FPGA Module no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.
页:
[1]