NI Calibration Executive 2024 Q1 Win11 64bitEng NI校准执行程序24.0.0下载
NI Calibration Executive 2024 Q1 Win11 64bitEng NI校准执行程序24.0.0下载校准执行程序
Calibration Executive用于校准和调整NI测量设备上的I/O通道。
Calibration Executive是一个用于计量应用的软件工具。Calibration Executive提供了直观的用户界面，提供自动或手动两种模式。此外，该工具还提供了报告功能，用于记录校准和调整结果，同时还可存储和检索数据。借助软件的模块化环境，您可以在可用时添加新的校准程序，并将报告存储在符合ODBC的数据库中，以便从其他程序访问。
该应用程序6.0之前的版本找不到完整版资源，无法提供。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
Calibration Executive 2024 Q1
发布日期：2024/3/8
包含的版本：2024 Q1完整版，版本号24.0.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
校验和：
文件大小: 12265248768 字节 (11.42 GB)
修改日期: 2024-10-17 18:07
MD5: d6eb7aa0182496e0547e2cdf51c02d5e
SHA1: 154d0912c8b8e89e57fce136e4fc081df43ceae2
SHA256: b7e0f645202ed862b6e56d6b09f14adc3cd61831d0891b1fd5394c50919933c8
CRC32: b636b965
百度网盘和NI官方下载：
请注册登录机器视觉论坛用户，购买附件查看下载地址
2024Q1版本未更新自述文件，参考上一版本6.9的自述文件
Calibration Executive 6.9 ReadmeFebruary 2023This file contains installation instructions and compatibility information for Calibration Executive 6.9.You can find more release information on ni.com.
[*]Calibration Executive Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
[*]Calibration Executive Documentation: New features, behavior changes, and other documentation
System RequirementsSupported Operating SystemsInstallation InstructionsUpgrade ConsiderationsProduct Security and Critical UpdatesDriver InformationNew FeaturesBehavior ChangesAccessing the DocumentationAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Unsupported Windows Operating SystemsSystem RequirementsCalibration Executive 6.9 has the following requirements:
[*]1 GHz, 64-bit (x64) processor
[*]8 GB of RAM (procedures with a large number of test points might require more memory)
[*]1024 x 768 pixels screen resolution
[*]The user must have administrator privileges
Supported Operating SystemsCalibration Executive 6.9 supports the following operating systems:
[*]Windows 10
Installation InstructionsDownload the Calibration Executive installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Documentation for more information about installing, removing, and upgrading NI software using Package Manager.After installing your software, you will need to activate it. Activating your software verifies the licenses associated with your NI account, so you can start using your software. You have different options for activation, based on your software and how it was purchased. Please visit ni.com/activate for more information on activation methods.Calibration Executive requires Java SE 8 Update 51 or greater, which is available from www.oracle.com.If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation method of the Suite or Bundle.Upgrade ConsiderationsCalibration Executive versions 6.0 and later have a new installation path, and the program no longer launches as an administrator application. These changes can render some application database paths invalid after the upgrade. After an upgrade, you might need to manually move some files.Upgrading Calibration Executive 5.x to 6.0 and laterIf your Report and Uncertainty databases are in their default locations, the setup program will automatically move the databases to the new default location and no action is required.If databases were moved from their default locations in Calibration Executive 5.x, then Calibration Executive 6.x attempts to reference the current location. If Calibration Executive cannot write to the files in this location, a warning message will be displayed when you first launch Calibration Executive. In this case, you will need to move the files manually to a writeable location. After you move the database files, follow the instructions in Selecting Database Locations to configure the paths for Calibration Executive 6.0 and later.Upgrading Calibration Executive 4.x to 6.0 and laterThe setup program for Calibration Executive 6.x does not automatically move your Report and Uncertainty databases, even if they are in their default locations. Instead, you will need to move the databases manually to a writeable location. After you move the database files, follow the instructions in Selecting Database Locations to configure the paths for Calibration Executive 6.0 and later.Selecting Database LocationsTo select the location of your Report database:
[*]In the menu bar, select Configure»Database options.
[*]Click the folder icon in the Calibration Executive Configure Report Database dialog, and browse to find the database file.
[*]Select the file and click OK.
[*]Click OK to close the dialog box.
To select the location of your Uncertainty database:
[*]In the menu bar, select Configure»Calibration Reports.
[*]In the Calibration Reports window, click Manage Uncertainty. The Uncertainty Export/Import window opens.
[*]Select Database Options»Select Database Location
[*]Use controls in the Select Uncertainty Database File explorer window to locate your uncertainty database file.
[*]Select the file, and click OK.
[*]In the Uncertainty Export/Import window, click Done.
[*]Click Close to close the Calibration Reports window.
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.Driver InformationThe following instruments require specific drivers that are not installed by Calibration Executive. To install these drivers, you must download them directly from the manufacturer's website; you can find links to third party instrument drivers at ni.com/idnet.Driver versions listed are those tested during development; later versions might be available and should be compatible.
InstrumentRequired Driver(s)
Rohde & Schwarz NRP-Z power meterNRP-Toolkit 4.16NRP-NI-VISA Passport 2.7.1NRP-Z VXI Plug & Play x64 Driver 3.6.0.0
Rohde & Schwarz SMA100A signal generatorVXIplug&play x64 driver rssma version 2.21.0
NoteThis release does not include an NI-VNA driver. To run the PXI-5691 and PXIe-5632 procedures, download NI-VNA 18.0 and install the driver manually after you install Calibration Executive.New FeaturesProduct support and new features were added as indicated below:Calibration Executive 6.9
[*]Added driver support for Rohde & Schwarz NRP33S Power Sensor.
[*]Product support:
[*]NI 9262
Calibration Executive 6.8
[*]Product support:
[*]PXIe-5163
[*]PXIe-5698
Calibration Executive 6.7
[*]Product support:
[*]FD-11613
[*]FD-11614
[*]NI 9210
[*]NI TB-9212 with mini-TC
[*]PXIe-4135 (40W)
[*]PXIe-4137 (40W)
Calibration Executive 6.6
[*]Added driver support for Rohde & Schwarz SMA100B signal generator for procedures that previously supported the Rohde & Schwarz SMA100A.
Calibration Executive 6.5
[*]Product support:
[*]PXIe-4139 (40W)
Calibration Executive 6.4
[*]Revised the reporting of guard band values with dB and dBv units on the calibration report.
[*]Import uncertainties from an Open XML spreadsheet using formulas that result in text values.
[*]Product support:
[*]PXIe-5841
[*]PXIe-5841 (2 yr)
[*]RM-26999
Calibration Executive 6.3
[*]Revised formulas for determining measurement uncertainty related to TURs and nominal values.
Calibration Executive 6.2
[*]Product support:
[*]PXIe-5624
[*]PXIe-5606 Adjust Only
[*]PXIe-5668 Adjust Only
[*]USB-6346 (Screw Terminal)
[*]STS-DIO-01
Calibration Executive 6.1
[*]Product support:
[*]NI 9224
[*]NI 9228
Calibration Executive 6.0
[*]Uncertainty and guard band options in custom report configurations
[*]Product support:
[*]PXIe-6349
[*]USB-6349
[*]NI 9202
[*]NI 9252
Behavior ChangesThe following procedures, features, and support were modified in Calibration Executive 6.x releases.Calibration Executive 6.8:
[*]The following procedures have changed:
[*]PXIe-5160 (2CH)
[*]PXIe-5160 (4CH)
[*]PXIe-5162 (2CH)
[*]PXIe-5162 (4CH)
[*]PXIe-5164
[*]PXIe-5650
[*]PXIe-5651
[*]PXIe-5652
[*]PXIe-5663E
[*]PXIe-5673E 3.3GHz
[*]PXIe-5673E 6.6GHz
[*]Removed NI USB-5681 calibration procedure support
[*]Removed NI USB-5684 power meter standard support
Calibration Executive 6.7:
[*]The following procedures have changed:
[*]NI 9219
[*]PXIe-4081 (90 day)
[*]PXIe-4081 (2 yr)
[*]PXIe-4137
[*]RM-26999
Calibration Executive 6.6:
[*]The following procedures have changed:
[*]PXIe-5160
[*]PXIe-5162
[*]PXIe-5644R
[*]PXIe-5645R
[*]PXIe-5646R
Calibration Executive 6.5:
[*]The following procedures have changed:
[*]PXIe-4081 (90 day)
[*]PXIe-4081 (2 yr)
[*]PXIe-4135
[*]PXIe-4139
[*]PXIe-5840
[*]PXIe-5841
[*]NI 9212
Calibration Executive 6.4:
[*]Guard band calculation for uncertainties with dB and dBv units has changed.
[*]The following procedures have changed:
[*]PCI-4461
[*]PXI-4461
[*]PXIe-5654 (10 GHz)
[*]PXIe-5654 (20 GHz)
[*]PXIe-5654 with PXIe-5696 (10 GHz) Adjust Only
[*]PXIe-5654 with PXIe-5696 (20 GHz)
[*]PXIe-5668 (14 GHz), all bandwidth options
[*]PXIe-5840
[*]PXIe-5840 (2 yr)
[*]NI 9220
[*]NI 9263
Calibration Executive 6.3:
[*]TUR calculation for uncertainties with dB and dBv units has changed.
[*]The following procedures have changed:
[*]PXIe-4135
[*]PXI-5422
Calibration Executive 6.2:
[*]PXI-4110
[*]PCI-5412
[*]PXI-5412
[*]PCI-5421
[*]PXI-5421
[*]PXI-5441
[*]PXIe-5442
[*]PXIe-5653
[*]PXIe-5665 (3.6 GHz)
[*]PXIe-5665 (3.6 GHz), no pre-amp
[*]PXIe-5665 (14 GHz)
[*]PXIe-5668 (14 GHz), all bandwidth options
[*]PXIe-5668 (26.5 GHz), all bandwidth options
Calibration Executive 6.1:
[*]PXI-4110
[*]USB-5132
[*]USB-5133
[*]PCI-5412
[*]PXI-5412
[*]PCI-5421
[*]PXI-5421
[*]PXI-5441
[*]PXIe-5442
[*]PXI-5622
[*]PXIe-5645R
[*]PXIe-5654 (20 GHz)
[*]PXIe-5654 (20 GHz), with PXIe-5696
[*]PXIe-5665 (3.6 GHz), no pre-amp
[*]PXIe-5668 (14 GHz), all bandwidth options
[*]PXIe-5668 (26.5 GHz), all bandwidth options
Calibration Executive 6.0.1:
[*]A critical bug in the Verify ALC Limits Table test is fixed, enabling the following devices to be verified and adjusted:
[*]PXI-5650
[*]PXIe-5650
[*]PXI-5651
[*]PXIe-5651
[*]PXI-5652
[*]PXIe-5652
[*]PXIe-5663
[*]PXIe-5663E
[*]PXIe-5673
[*]PXIe-5673E
Calibration Executive 6.0:
[*]Added adjustment support for NI 9203.
[*]Modified audio notifications can only be enabled or disabled; there are no additional options to be configured.
[*]Removed support for 32-bit OS calibration procedures.
Accessing the DocumentationRefer to the Calibration Executive documentation, accessible from strong>Help»Calibration Executive Help, for information about Calibration Executive.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation.Using NI Software with Microsoft Windows 10For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.Unsupported Windows Operating SystemsCalibration Executive no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.
页:
[1]