NI LabVIEW 2017F1 MAC OS X64Eng LV2017F1苹果系统评估版下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI LabVIEW 2017F1 MAC OS X64Eng LV2017F1苹果系统评估版下载

2017年5月春季包更新全新LabVIEW2017版，该软件包含了下一代的LabVIEW NXG。LabVIEW2017共发布了64位英文版、32位英文版、32位中文版、32位日文版、32位韩文版、32位法语版、32位德语版以及MAC系统版本等多个版本。请根据需要选择不同的版本安装。
NI发布软件不按套路出牌了，按以前的套路，这个时候应该是出LabVIEW2016SP1版本的，等到下半年8月时，才会出LabVIEW2017了。但是现在将LabVIEW2017直接放到上半年发布了，跳过了LabVIEW2016SP1版本。不管他怎么发布，反正只要性能强劲就好。不过从LV2017版开始，上半年开始发布主版本，下半年则发布SP1版本。调整了一下发布周期。以前是上半年发布上一年的SP1版本，下半年发布当年的主版本。

百度网盘下载地址：
LabVIEW2017F1MAC:
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看
LV2017F1MAC.txt (251 Bytes, 下载次数: 63, 售价: 10 元)

2020-2-20 12:46 上传

点击文件名下载附件
LV2017F1MAC

LabVIEW 2017 Readme for OS X

March 2017

This file contains important information about LabVIEW 2017 for OS X, including system requirements, installation instructions, known issues, and a partial list of bugs fixed. LabVIEW 2017 for OS X is available only in 64-bit.

Refer to the NI website for the latest information about LabVIEW.

Refer to the labview/readme directory for readme files about LabVIEW add-ons, such as modules and toolkits.

System Requirements

Installation Instructions

Product Security and Critical Updates

Supported Modules and Toolkits

Supported Drivers

Known Issues

Bug Fixes

Accessing the Help

Additions to the LabVIEW Help

Legal Information

---

System Requirements

LabVIEW 2017 for OS X has the following requirements:

OS X	Run-Time Engine	Development Environment
Processor	Intel-based processor	Intel-based processor
RAM	256 MB	2 GB
Screen Resolution	1024 x 768 pixels	1024 x 768 pixels
Operating System	OS X 10.11 or 10.12	OS X 10.11 or 10.12
Disk Space	257 MB	1.4 GB for the complete installation
Temporary Files Directory	N/A	LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory.
File System	Case-insensitive	Case-insensitive
Note LabVIEW 2017 for OS X is available only in 64-bit. LabVIEW and LabVIEW Run-Time Engine require 64-bit processors which support SSE2 instructions.

Installation Instructions

Complete the following steps to install and activate LabVIEW for OS X.

Are you installing LabVIEW for the first time? Insert the LabVIEW installation media and follow the onscreen instructions to install LabVIEW. To omit some of these files, click Customize on the Installation Type page. When prompted, enter the serial number for each product you want to activate. Your serial number can be found at ni.com/myproducts. If you are managing your license with a volume license server, you should receive your volume license file by email.

To install LabVIEW modules and toolkits, refer to the readme of each product for installation instructions. The LabVIEW VI Analyzer Toolkit installs with the LabVIEW Professional Development System for OS X.

You can install NI device drivers from ni.com/macdrivers.

Are you upgrading from a previous version of LabVIEW? Refer to the LabVIEW Upgrade Notes for information about protecting existing VIs and projects before installing a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2017.

Note  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Product Security and Critical Updates

Visit ni.com/security for security information about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Supported Modules and Toolkits

LabVIEW 2017 for OS X supports the following modules and toolkits.

• Control Design and Simulation Module1
• MathScript RT Module2
• VI Analyzer Toolkit
  

1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.

2 The MathScript RT Module does not support the libraries class of MathScript RT Module functions.

Refer to the readme of each product for more information about system requirements, installation instructions, and activation.

Supported Drivers

LabVIEW 2017 for OS X supports the following drivers. To use hardware with LabVIEW 2017, install the latest version of the driver for the device.

• NI-VISA 17.0 and later
• NI-DAQmx Base 17.0 and later
• NI-488.2 17.0 and later
  

Refer to the readme of each driver for more information about system requirements and installation instructions.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in LabVIEW 2017.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in LabVIEW 2017. This is not an exhaustive list of issues fixed in the current version of LabVIEW. If you have a CAR ID, you can search this list to validate that the issue has been fixed.

ID	Fixed Issue
404983	Dynamic load of LabVIEW Class fails when built into a DLL.
522606	Error Ring does not adhere to dataflow in an executable or in a VI with debugging disabled.
524160	Updated Timed Loop Mode example VI to better display custom phase and show correct value for period in context help.
567353	When an XNode output is wired to the Loop count of a Parallel For Loop the VI breaks.
571901	Using the BD Get Image Scaled method crashes LV 2014 and 2015 if the depth of the image is 1.
572024	Built applications hang in some instances when calling Quit LabVIEW.
584378	LabVIEW has the potential to crash when simultaneously setting multiple variant attributes to empty variant constants.
588140	Insert of Compound Arithmetic node on wire can result in undesirable configuration.
590370	Levenberg-Marquardt algorithm has poor convergence in some cases.
591709	Calling Format Value on improper value can result in crash.
592088	Improper updates of library members when using Actor Framework Message Maker.
594760	Example "Extract number with match pattern" gives incorrect output.
595814	The unflatten from String primitive can take several minutes to return when given malformed input strings.
595815	DataSocket Read VI crashes LabVIEW when calling certain IP addresses.
596804	Re-registering a dynamic event can cause subscribing event frames to behave improperly.
598986	Scrollbar does not properly respond to clicks on string constant.
601256	Error message when replacing existing channel endpoint with an invalid configuration is not clear.
601764	Local variables can be created from channel wires.
601807	Resizing a "Register for Events" Node Crashes LabVIEW.
602230	Connecting conflicting channel types does not always break the wire.
602973	In some cases, using the Min/Max function on array of single precision floating point numbers can cause a VI to fail to compile.
603092	Rearranging tabs in tab control can cause a crash.
603391	Incorrect Out of Memory dialog when using "Active Plot" property node in 64-bit LabVIEW.
603562	Using dynamically dispatched VIs with unwired input terminals can, in some cases, cause crashes.
603576	Channels carrying typedefs/classes create crosslinks when users duplicate projects.
603854	QMH project template contains a potential race condition.
605231	Attempting to abort a VI may not always cause the VI to abort.
606365	Dragging a control or indicator to the edge of the block diagram can cause duplication of the front panel object.
606847	Dynamic Dispatch VIs break when the class wire is passed through a shift register in specific cases.
607685	Cast Unit Bases does not correctly remove units from output.
611532	Selecting "Use Default if Unwired" on an output tunnel with a LabVIEW class data type will cause a broken VI with no errors.
611810	Saving a VI containing a "Lookup Channel Probe" node for LabVIEW version 2015 and earlier can result in failure to open the saved VI.
611838	The abort behavior of the Accumulator Tag channel wire does not match that of other implementations.
612501	Interpolate 2D Scattered VI will return an incorrect value for specific size input values.
613416	Installing LabVIEW evaluation for Mac can sometimes cause the .app file to be installed to the wrong directory.
614469	Execution Highlighting does not display correctly on Mac OS X.
615195	Collapsing "Variant Attribute Get / Replace" border node on In Place Element Structure causes LabVIEW to crash.
615288	Previous versions of LabVIEW are unable to open dynamic classes saved using "Save for Previous Version" in 2016.
616848	Using Quick Drop to add a Custom Control Template to a VI's Front Panel crashes LabVIEW.
617119	Pressing Abort during project creation then creating another project causes LabVIEW to crash in some cases.
617504	Dragging the front panel icon of a VI onto the block diagram of another VI will undo the last edit of the dragged VI in some cases.
617917	Possible crash when loading particular classes.
623269	Attempting to drop a file on a path control in OS X will require the file to be dropped below the path control in some cases.
624304	Actors that return an error from Pre Launch Init also send a Last Ack containing the same error.
624957	Possible memory corruption when opening invalid file.
627716	Opening a project with "Messenger Channels" causes a search for Wrapper.lvclass.
627910	Large projects may have extended save times.

Accessing the Help

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about LabVIEW 2017.

Additions to the LabVIEW Help

The following list contains additional changes to LabVIEW that are not included in the LabVIEW Help, the LabVIEW Upgrade Notes, or both:

• In LabVIEW 2017, you can insert the contents of a subVI into the calling block diagram at edit time by right-clicking the subVI node and selecting Replace with SubVI Contents. In the Replace with SubVI Contents dialog box that appears, you can configure the following options:
  
  • Make space in calling diagram to fit subVI contents—Specifies whether to adjust the calling block diagram to accommodate the contents of the subVI.
  • Wrap subVI contents in a Sequence structure—Specifies whether to place the contents of the subVI in a Stacked Sequence structure.
    
  
  

---

Legal Information

Copyright

© 2004–2017 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

374717G-01