NI-Motion 15.0 Full Win32Eng NI运动控制设备驱动软件2015完整版 适用LabVIEW2012~LabVIEW2015

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-Motion 15.0 Full Win32Eng NI运动控制设备驱动软件2015完整版 适用LabVIEW2012~LabVIEW2015

NI-Motion为NI运动控制设备的驱动软件Motion Control Driver Software，开发软件为NI SoftMotion，及Motion Assistant。

NI-Motion 15.0
发布日期
15-8-3
受支持的操作系统
Windows 7
Windows 10
Windows Server 2008 R2 64-bit
Windows 8.1
Windows Server 2003 R2 32-bit
Windows XP (SP3) 32-bit
Windows Vista
Windows 8
语言
英文
校验和
(MD5)
54f46b716c415230f005e470d4505b37

百度网盘下载（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看 提取码:请注册登录视觉论坛会员，购买附件查看

NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看

Motion15.0.txt (250 Bytes, 下载次数: 3, 售价: 10 元)

2020-6-24 11:43 上传

点击文件名下载附件
Motion15.0

NI-Motion™ 15.0 Readme

---

This document contains installation and programming considerations for using NI-Motion with NI 73xx motion controllers, a list of changes in this version of NI-Motion, and information about NI-Motion known issues.

Contents

General Information

Installation and Configuration Instructions

NI-Motion 15.0 Changes and Enhancements

NI-Motion 15.0 General Considerations

NI-Motion 15.0 Known Issues

Previous NI-Motion Changes and Enhancements

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

General Information

NI-Motion 15.0 is the motion control software you use to communicate with all National Instruments NI 73xx motion controllers using LabVIEW, C, LabWindows™/CVI™, or Microsoft Visual Basic 6.0 development platforms. Refer to KnowledgeBase article 39DA8HMU, Does the NI-Motion Driver Support Visual Studio .NET?, at ni.com/kb for information about Visual Studio .NET 2003 and Visual Studio 2005 or later support.

NI-Motion 15.0 is compatible with the following National Instruments software:

• LabVIEW 2012 or later.
• LabVIEW 2012 or later Real-Time Module.
• LabWindows/CVI 7.0 or later.
• NI Motion Assistant 2.7 or later graphical prototyping software.
  

Compatibility with Earlier Versions of NI-Motion

If you have developed motion control systems using a previous version of NI-Motion, you must recompile your code before it will work correctly with NI-Motion 15.0.

In addition, any applications you build in NI-Motion 15.0 will not work correctly in earlier versions of NI-Motion. Similarly, configuration settings you build and save in Measurement & Automation Explorer (MAX) with NI-Motion 15.0 will not work with applications you build in earlier versions of NI-Motion.

LabVIEW Real-Time Users

To use NI-Motion 15.0 with a real-time target, you must update the NI-Motion driver software on the real-time target system using MAX. Driver versions on the host and target system must be the same for proper operation. Refer to the Measurement & Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX for information about installing software on the remote system.

Back to Top

---

Installation and Configuration Instructions

The following sections include important information about installing NI-Motion 15.0, instructions for downloading and installing NI-Motion 15.0 from the Web or from the CD, and information about NI-Motion firmware.

You can run the NI-Motion 15.0 installer on the following operating systems:

• Windows 10/8.1/8/7/Vista
• Windows XP Service Pack 3 or later (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

NI-Motion runs as a 32-bit application on all operating systems.

Notes:

• NI-Motion is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
• Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.
  

NI-Motion does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions. If you are any of these operating systems, do not install NI-Motion 15.0.

Tip  For optimal performance, update your operating system to the latest service pack and apply all security patches.

Downloading NI-Motion 15.0 from the Web

Complete the following steps to install this update:

• Download the NIMotion150.exe file, and then run it.
• Follow the onscreen instructions.
  
  Note  (Windows 10/8.1/8/7/Vista)  Users may see access and security messages during installation. Accept the prompts to complete the installation.
• When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
• Download the updated firmware to your controller(s):
  
  Note  You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 15.0.
  
  • Launch MAX.
  • Expand Devices and Interfaces.
  • Select the appropriate motion controller.
  • Click the Firmware tab.
  • Click the Update Firmware button at the top of the window to update all the firmware files on your device.
    
  
  

Installing from the CD

Complete the following steps to install this update:

• Insert the NI-Motion 15.0 installation CD in the CD-ROM drive.
• If you have autorun enabled, autorun.exe runs automatically. Otherwise, double-click autorun.exe.
• Follow the onscreen instructions.
  
  Note  (Windows 10/8.1/8/7/Vista)  Users may see access and security messages during installation. Accept the prompts to complete the installation.
• When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
• Download the updated firmware to your controller(s):
  
  Note  You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 15.0.
  
  • Launch MAX.
  • Expand Devices and Interfaces.
  • Select the appropriate motion controller.
  • Click the Firmware tab.
  • Click the Update Firmware button at the top of the window to update all the firmware files on your device.
    
  
  

Changing Firmware Files to an Earlier Version of NI-Motion

For optimal performance, ensure that the firmware on your controller matches the driver version you install. Complete the following steps to replace the firmware on your controller if you need to use an earlier version of the NI-Motion software and firmware:

• Launch MAX.
• Expand Devices and Interfaces.
• Select the appropriate motion controller.
• Click the Firmware tab.
• Right-click one of the firmware files in the Firmware Name column and select Download All Files to download the firmware files on the computer onto the controller.
  

Back to Top

---

NI-Motion 15.0 Changes and EnhancementsLabVIEW 2015 Support

NI-Motion 15.0 is fully supported on LabVIEW 2015.

Back to Top

---

NI-Motion 15.0 General ConsiderationsImporting Portable Configuration Files

Importing motion controller settings from older portable configuration files may take a few minutes due to the settings upgrade process. This is expected behavior.

Creating C Projects with Microsoft Visual Studio .NET 2003 and Visual Studio 2005 or later

Visual Studio .NET 2003 and Visual Studio 2005 and later do not allow C++ precompiled header files to be used with C source files. Disable precompiled headers when running NI-Motion C examples.

Firmware Versions in NI-Motion 15.0

The following table lists the expected firmware files that ship with NI-Motion 15.0.

Firmware Sector	Version Number
	NI 7330	NI 7340	NI 7350	NI PCI-7390
68331	7.40.3003	7.40.3003	7.40.3003	7.40.3003
DSP	7.32.3003	7.32.3003	7.32.3003	7.32.3003
FPGA1	7.00.3001	7.00.3001	7.10.3001	7.00.3014
FPGA2	7.00.3001	7.00.3001	—	—

Back to Top

---

NI-Motion 15.0 Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-Motion 15.0.

Issues That May Affect NI-Motion

An issue that may arise when running 32-bit applications in 64-bit versions of Windows could adversely affect NI-Motion. Refer to KnowledgeBase article 6EMFLQUB, Why Does National Instruments Software List Microsoft Hotfix 2588507 as a System Requirement?, at ni.com/kb for more information.

Back to Top

---

Previous NI-Motion Changes and Enhancements

Refer to KnowledgeBase article 47CC30FL, NI-Motion Readmes, at ni.com/kb for access to previous NI-Motion readme files, starting with NI-Motion 7.0.

Back to Top

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Back to Top

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  Unlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

Back to Top

NI-Motion Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI-Motion will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Motion that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows/CVI	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

Back to Top

---

Important Information

Copyright

© 2003–2016 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

---