注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI FlexLogger 2019R3.1(1.8.1) Win64Eng 美国国家仪器FlexLogger应用软件2019R3.1版即ni-flexlogger_1.8.1
FlexLogger是可快速配置传感器和记录混合信号数据的应用软件，用于验证机电系统，而且完全无需编程。
FlexLogger应用软件可帮助您使用NI DAQ硬件构建灵活、可扩展的数据记录系统，而且无需任何编程。您可以使用针对特定传感器的配置工作流程来快速设置、显示和记录来自模拟传感器、数字信号和车载通信总线等测量的同步数据，您还可以通过生成电压、电流或数字信号来驱动执行器或控制设定点，这些信号可以通过事件触发器自动响应不断变化的条件。FlexLogger可自动保存记录测试配置的元数据，以便您可以快速跟踪测试结果并比较多个测试的结果。 您还可以通过集成的数据查看器交互式地查看测试结果，以便直观地检查数据并得出结论。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
（因为单个文件大于4GB，超出百度网盘文件上限，分割成两个压缩文档分包）
NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
校验和：
(MD5) 4d5482a30c0c85f56e365ceaceedb4fc
(SHA256) ee9d00aff398828033fc0201eef900a50203de1b9083b61049f0b782969ef3d9
FL2019R3.1.txt
(350 Bytes, 下载次数: 0, 售价: 10 元)
FlexLogger 2019 R3 ReadmeJuly 2019 This file contains important information about FlexLogger, including system requirements, installation instructions, and supported hardware.
Overview System Requirements Installation Instructions Product Security and Critical Updates New Features Supported Hardware Extending FlexLogger I/O with the FlexLogger Plugin Development Kit Accessing the Help Using NI Software with Microsoft Windows 10 Using NI Software with Microsoft Windows 8.1 FlexLogger Drops Support for Windows 7 64-bit in 2021 Legal Information
OverviewFlexLogger is application software for quick sensor configuration and data logging of mixed signals to verify electromechanical systems, all without programming. Back to Top
System RequirementsFlexLogger has the following minimum system requirements: Operating System | RAM/Processor | Required Software1 | - 64-bit version of Windows 10/8.12/7 SP13
- 1024 x 768 resolution (1366 x 768 or higher recommended)
| - Pentium 4 G1 equivalent (Intel i5 equivalent or higher recommended)
- 4 GB disk space
- 4 GB RAM
| - NI-DAQmx software 19.0 or higher
- NI-XNET software 19.0 or higher
| 1 Required drivers are included with the FlexLogger installer. 2 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 requires Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates. 3 NI software is signed with a SHA-256 certificate. Windows 7 SP1 requires Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. |
Back to Top
Installation InstructionsNI automates FlexLogger installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager. Back to Top
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI. Back to Top
New Features2019 R3 (July 2019)- Added hardware support for the FD-11605
- Alarms for input channels, including the following features:
- Alarm history pane
- Event triggering from alarms
- Reset values on output channels
- Additional measurement types for counter input modules:
- Angular position
- Linear position
- Pulse
- Hardware filter support for FieldDAQ
- Support for custom I/O plugins created with the FlexLogger Plugin Development Kit 1.0
- Boolean logic for analog channels
- Digital input event triggering
- Output support for LIN
- LIN master support
- Offline FlexLogger manual access
2019 R2 (April 2019)- Added hardware support for:
- Output support for CAN
- Input support for LIN
- Capability to add timestamped notes during test
- Lowpass and highpass Butterworth filter channels added to Channel Specification
- TSN synchronization feedback
- No limits on Slow/Medium/Fast/Digital sample rate configuration
- System memory monitoring and dynamic visualization settings
- Pull-up resistor support and threshold voltage support for the NI 9361
- Powered sensor support for the FD-11601
2019 R1 (December 2018)- Added hardware support for:
- NI 9231
- FD-11601
- FD-11614
- TRC-8546 transceiver cable for the NI 9860
- Enhanced system visualization in Channel Specification
- Conditional events to automate outputs
- RMS and Mean averaging of channels added to Channel Specification
- Capture test metadata
- Improved graph visualization
- Analog input channel data filtering
- Ability to reassign I/O or automotive channel configurations
- Automatically log channel characteristics
- Screen visualization shows minimum and maximum data values in visible range
Back to Top
Supported HardwareThe following lists detail the hardware models supported in FlexLogger. CompactDAQCompactDAQ ChassisC Series Voltage Input Modules- NI 9201
- NI 9202
- NI 9205
- NI 9206
- NI 9209
- NI 9215
- NI 9220
- NI 9221
- NI 9222
- NI 9223
- NI 9224
- NI 9225
- NI 9228
- NI 9229
- NI 9238
- NI 9239
- NI 9242
- NI 9244
- NI 9251
C Series Voltage Output ModulesC Series Current Input Modules- NI 9203
- NI 9208
- NI 9227
- NI 9246
- NI 9247
C Series Current Output ModulesC Series Voltage and Current Input ModulesC Series Sound and Vibration Input Modules- NI 9230
- NI 9231
- NI 9232
- NI 9234
- NI 9250
C Series Temperature Input Modules- NI 9210
- NI 9211
- NI 9212
- NI 9213
- NI 9214
- NI 9216
- NI 9217
- NI 9226
C Series Universal Analog Input ModulesC Series Strain/Bridge Input ModulesC Series Counter Input ModulesC Series Digital Modules- Serial Digital I/O Modules
- Parallel Digital I/O Modules
- NI 9344
- NI 9401
- NI 9402
- NI 9411
- NI 9421
- NI 9422
- NI 9423
- NI 9435
- NI 9436
- NI 9437
- NI 9472
- NI 9474
- NI 9475
- NI 9481
- NI 9482
- NI 9485
Note: You cannot use parallel and serial modules together on the same FlexLogger project unless they are installed in separate cDAQ chassis. C Series CAN Interface ModulesC Series Vehicle Multiprotocol Interface ModulesCAN Interface DevicesC Series LIN Interface ModulesLIN Interface DevicesFieldDAQVoltage Input Device for FieldDAQ| Note Revision B and later of the FD-11603 supports hardware filtering. |
Sound and Vibration Input Device for FieldDAQStrain/Bridge Input Device for FieldDAQ| Note Revision B and later of the FD-11637 supports hardware filtering. |
Temperature Input Device for FieldDAQNote: FlexLogger supports network synchronization using IEEE 802.1AS protocol. Refer to your device documentation, available on ni.com/manuals, for more information.
Note: FieldDAQ supports hardware filtering. Refer to the FlexLogger Manual for more information. Back to Top
Extending FlexLogger I/O with the FlexLogger Plugin Development KitYou can extend the functionality of FlexLogger 2019 R3 by creating and importing a custom I/O plugin using the FlexLogger Plugin Development Kit (version 1.0). The FlexLogger Plugin Development Kit is available for download in NI Package Manager. Refer to the FlexLogger Plugin Development Kit 1.0 Readme for more information. Back to Top
Accessing the HelpThe online FlexLogger manual contains the most current help for your product version. Refer to the FlexLogger Manual, accessible from Help»Online manual, for more information about using FlexLogger. Users without online access can choose to use an offline version of the FlexLogger manual if that option is selected at installation. To enable the use of the offline FlexLogger manual, go to Preferences»General and select Use the installed FlexLogger manual. Note: Installed manual use within FlexLogger 2019 R3 is currently available in English only. To access other language versions of the installed manual, go to C:\Program Files (x86)\National Instruments\Help Viewer\Documentation and double-click the NIHELP file for your language. Back to Top
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10. Back to Top
Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8. Back to Top
FlexLogger Drops Support for Windows 7 (64-Bit)FlexLogger will drop support for Windows 7 (64-bit) operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on this operating system. For detailed information about NI operating system support, visit ni.com/r/windows764bit. Back to Top
Legal InformationCopyright © 2017–2019 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies. IVI Foundation Copyright Notice Content from the IVI specifications reproduced with permission from the IVI Foundation. The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377046F-01 | 
发表于 2020-8-6 00:17:51
