NI-DCPower Driver 1.8.6 Win32/64Eng NI DC电源仪器驱动程序下载1.8.6

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-DCPower Driver 1.8.6 Win32/64Eng NI DC电源仪器驱动程序下载1.8.6

NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。

1.8.6
文件名: DC-Power\NIDCPWR186.exe
文件大小: 1651258144 字节 (1.54 GB)
修改日期: 2013-10-19 00:25
MD5: 9a535457ce4ca0d0ae7a2f4f792860f1（官方正确）
SHA1: b9a70a81976bf6cd48b2659589e6ec51b9cba8a3
SHA256: 7e81271293020490fc0ef32f0de2097030e2a31a848ffe134c369e927c33f961
CRC32: 605fbbb4

DCPower1.8.6.txt (263 Bytes, 下载次数: 0, 售价: 10 元)

2020-10-17 00:17 上传

点击文件名下载附件

NI-DCPower Readme

2013

Version 1.8.6

---

Thank you for using NI-DCPower. This file contains important information about NI-DCPower and is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Installed File Names and Locations
  
  • Software
  • Documentation
  • Examples
    
• Updates and Notifications
• Uninstalling/Modifying NI-DCPower
• Known Issues
• Bug Fixes
• Automating the Installation of NI Products
• How to Use NI Software with Microsoft Windows 8
• Important Information
  

---

New Features

NI-DCPower 1.8.5 includes the following new features:

• Support added for LabVIEW 2013 (32-bit) and LabVIEW 2013 (64-bit)
• Support removed for LabVIEW 2009
  

NI-DCPower 1.8 includes the following new features:

• Support for the NI PXIe-4112/4113
• Support for self-calibration of the NI PXI-4132
  

NI-DCPower 1.7.5 includes the following new features:

• Support for the NI PXIe-4144/4145
• Support added for LabVIEW 2012 (32-bit) and LabVIEW 2012 (64-bit)
• Support removed for LabVIEW 8.6.1
  

NI-DCPower 1.7 includes the following new features:

• Support for the NI PXIe-4142/4143
• Support for NI-DCPower run-time custom installers built using National Instruments application development environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using NI DC Power Supplies and SMUs.
  Notes:
  
  
  • The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX).
  • The run-time installer does not support upgrading from NI-DCPower 1.6.x or earlier or NI-DAQmx 8.9.x or earlier. You must uninstall these products prior to installing the NI-DCPower Run-Time installer.
    
  
  
  

NI-DCPower 1.6.2 improves multi-device performance on multi-core systems.

NI-DCPower 1.6.1 includes the following new features:

• Support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit)
• Support removed for LabVIEW 8.5.1
  

NI-DCPower 1.6 includes the following new features:

• Support for NI PXIe-4140/4141
• Support for new signal routes added to the NI PXI-4132 (Source Complete event to Measure trigger) and the NI PXIe-4140/4141/4154 (Measure trigger to Source trigger, Source trigger to Measure trigger, and Source Complete event to Measure trigger)
  

Supported Hardware

NI-DCPower 1.8.6 and later supports the following power supply and source-measure units (SMUs):

• NI PXI-4110
• NI PXIe-4112
• NI PXIe-4113
• NI PXI-4130
• NI PXI-4132
• NI PXIe-4140
• NI PXIe-4141
• NI PXIe-4142
• NI PXIe-4143
• NI PXIe-4144
• NI PXIe-4145
• NI PXIe-4154
  

Note  MXI Express and MXI-4 are supported on Windows 8/7/Vista/XP, but MXI-3 is supported on only Windows XP.

Device-specific information about these modules is included in the NI DC Power Supplies and SMUs Help.

System RequirementsSupported Operating Systems

NI-DCPower 1.8.6 and later supports the following operating systems:

• Windows 8 (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 3 (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note  NI-DCPower 1.8.6 and later does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-DCPower 1.4 or earlier.

Supported Real-Time Operating Environments

NI-DCPower 1.8.6 and later supports the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows/CVI Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows XP Service Pack 3 (SP3): 128 MB
  • Windows 8/7/Vista: 512 MB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows XP SP3: 256 MB
  • Windows 8/7/Vista: 1 GB
    
• A screen resolution of 1,024 x 768
• Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
  

Application Development Environments (ADEs)

Note:  You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-DCPower. To add support for ADEs installed after installing NI-DCPower, modify your NI-DCPower installation or launch the NI-DCPower installer again.

• 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 SP1 (32-bit), 2012 SP1 (64-bit), 2013 (32-bit), or 2013 (64-bit)
• LabVIEW Real-Time Module 2010 SP1, 2011 SP1, 2012 SP1, or 2013
• LabWindows™/CVI™ 2009 or later
• LabWindows/CVI Real-Time Module 2010 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
• If you are running your application on an RT target, 128 MB of memory or more is required.
  

Installed File Names and LocationsSoftware

• is an alias for the following National Instruments file folder location:
  
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows 8/7/Vista: Users\Public\Documents\National Instruments
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI Foundation\IVI\
  • Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI Foundation\IVI\

    Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI\ Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files\IVI Foundation\IVI\
    Note  $(IVIROOTDIR64) is configured as an environment variable on the target system.
    
    
  
  

File Locations

Item	Installed Location on Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP
NI-DCPower	\Drivers\niDCPower
NI-DCPower Function Panel	\Drivers\niDCPower\niDCPower.fp
NI-DCPower Examples	\niDCPower\Examples
NI-DCPower Header files	\Include
NI-DCPower Import Library files (32-bit)	\Lib
NI-DCPower Import Library files (64-bit)	\Lib_x64
NI-DCPower DLL (32-bit)	\Bin

Additional File Locations for Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)

Item	Installed Location on Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)
NI-DCPower Function Panel	\Drivers\niDCPower\niDCPower.fp
NI-DCPower Header files	\Include
NI-DCPower Import Library files (64-bit)	\Lib_x64
NI-DCPower DLL (64-bit)	\Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-DCPower»Documentation. The documentation set is composed of the following documents:

• NI-DCPower Readme
• NI DC Power Supplies and SMUs Getting Started Guide—Printed and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.
• NI DC Power Supplies and SMUs Help—HTML help format. Contains power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.
• NI DC Power Supplies and SMUs Specifications—Printed and PDF format. Lists specifications for NI DC Power Supplies and SMUs.
• NI DC Power Supplies and SMUs Calibration Procedures—PDF format. Contains calibration instructions for NI DC Power Supplies and SMUs.
• Maintain Forced-Air Cooling Note to Users—Printed format. Contains important cooling information for NI DC power supplies and SMUs.
• Read Me First: Safety and Electromagnetic Compatibility—Printed format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
  

Note  To view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Examples

Refer to Start»All Programs»National Instruments»NI-DCPower»Examples for the examples for the supported ADEs.

Refer to the Installed File Names and Locations section for the installed locations of the example sets.

NI-DCPower Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

Uninstalling/Modifying NI-DCPower

Perform the following procedure to uninstall NI-DCPower 1.8.6:

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Settings.
• Double-click Add/Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-DCPower 1.8.6 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-DCPower 1.8.6 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 8, complete the following steps:

• Right-click on the Start screen.
• Select All apps, and launch the Control Panel.
• Select Programs» Programs and Features.
• Select National Instruments Software.
• Click the Uninstall button.
• Select NI-DCPower 1.8.6 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-DCPower installation, the following software is installed. To completely remove the NI-DCPower installation from your system, you must also remove all of the following packages.

• NI-DCPower Run-Time 1.8.6
• NI IVI Compliance Package 4.4
• NI Measurement & Automation Explorer 5.4
• NI-DAQmx 9.1.7
• NI-VISA Runtime 5.0
• NI Spy 2.7.2
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-DCPower 1.8 and 1.8.5 Known Issues List web page on the National Instruments Web site for an up-to-date list of known issues in NI-DCPower 1.8.6.

Bug Fixes

The following items are changes in NI-DCPower 1.8 from NI-DCPower 1.7.5.

ID	Fixed Issue
286821	Fixed an issue in which you must run LabWindows/CVI with elevated privileges to successfully launch the NI-DCPower Simultaneous Update example from LabWindows/CVI. NI has renamed this example to NI-DCPower Simultaneous Operation, and you no longer need to run LabWindows/CVI with elevated privileges to launch this example.
371368	Fixed an issue in which temperature changes degraded the output accuracy on the NI PXI-4132. You can now self-calibrate the NI PXI-4132 to maintain output accuracy.

The following items are changes in NI-DCPower 1.7.5 from NI-DCPower 1.7.

ID	Fixed Issue
369565	In a few rare cases, when users wrote to nonvolatile storage on the NI PXIe-4140/4141/4142/4143, calibration constants became invalid, causing the device to become unusable until its next external calibration. Now you can write to nonvolatile storage on the NI PXIe-4140/4141/4142/4143 without issue.

The following items are changes in NI-DCPower 1.7 from NI-DCPower 1.6.3.

ID	Fixed Issue
352628	The first measurement taken after opening a new session for the NI PXI-4132 no longer has the potential to be incorrect.
347012	Configuring the niDCPower Output Connected property to TRUE or the NIDCPOWER_ATTR_OUTPUT_CONNECTED attribute to VI_TRUE while in the Running state no longer incorrectly configures the NI PXI-4132 for remote sense.
346464	In SignalExpress, using the NI-DCPower Generate step while sweeping no longer sources only the first point in the sequence.
346154	LabVIEW code generated in SignalExpress from the NI-DCPower Generate step no longer returns an error when run while sweeping.
342622, 341027	The performance of the NI PXIe-4140/4141 range change algorithm is improved.
328629	When configuring the device in the Committed state in Single Point source mode after a property or attribute is configured in the Running state, the incorrect previous property or attribute value is no longer retained.
283258	Previously, the Measure Record Length property or NIDCPOWER_ATTR_MEASURE_RECORD_LENGTH attribute permitted a measurement record to be composed of up to 231-1 measurements, but the driver and hardware would silently ignore a measurement record composed of more than 224 measurements. The driver now returns an error if you attempt to compose a measurement record of more than 224 measurements. This change in behavior may change how existing code is executed.
318481	The NI PXI-4132 output disabled current limit is now 2% of the current limit range, as intended.

The following items are changes in NI-DCPower 1.6.3 from NI-DCPower 1.6.2.

ID	Fixed Issue
323968	Aborting an operation no longer has the potential to cause transient output behavior on subsequent configurations of the NI PXI-4132 or NI PXIe-4140/4141.

The following items are changes in NI-DCPower 1.6 from NI-DCPower 1.5.

ID	Fixed Issue
283254	Warning 1073364993 is now returned instead of error -1074118605 if a measurement is taken while the device is performing a range change.

The following items are changes in NI-DCPower 1.5 from NI-DCPower 1.4.

ID	Fixed Issue
217333	The source delay attribute will be coerced to a minimum of 30μs on the NI PXI-4132.
178242	When handshaking on the NI PXI-4132 with other devices using the source trigger and measure complete event, the source trigger will no longer be missed.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

NI-DCPower Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments NI-DCPower will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-DCPower that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

.

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows/CVI	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

---

Important Information

Copyright

© 2007–2013 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.