NI-Industrial Communications for DeviceNet 2.0.2 Driver Win32Eng NI-DNet工业通信软件驱动程序2.0.2下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-Industrial Communications for DeviceNet 2.0.2 Driver Win32Eng NI-DNet工业通信软件驱动程序2.0.2下载

NI DeviceNet工业通信软件
NI-Industrial Communications for DeviceNet可帮助您配置和控制DeviceNet网络上DeviceNet设备。
NI-Industrial Communications for DeviceNet是一种驱动程序软件，为您使用DeviceNet接口设备、C系列DeviceNet接口模块和PXI DeviceNet接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库，因此您可以为兼容的硬件设备创建自定义的DeviceNet应用程序。

Win32Eng
2.0.2
文件大小: 262167136 字节 (250.02 MB)
修改日期: 2011-09-27 00:16
MD5: 5b6d2d754c67f93158956b952a82c206（官方正确）
SHA1: 8200f51e7da5e940e933b6b7f1cd28609c36f48b
SHA256: 00a631277a0e52fdddf0801965e060a4171d105f80f1a7173b745a4c3c153bdd
CRC32: 34afccfe

百度网盘与NI官方下载地址：
DNET2.0.2.txt (634 Bytes, 下载次数: 0, 售价: 10 元)

2021-1-4 22:22 上传

点击文件名下载附件

NI-Industrial Communications for DeviceNet Software for Windows and LabVIEW Real-Time (RT)Version 2.0.2

© Copyright 1998–2011 National Instruments Corporation. All Rights Reserved.

Thank you for using National Instruments products for DeviceNet.

Information in this file is divided into the following sections:

Documentation

Supported Operating Systems

Supported Hardware

Supported Development Environments

Improvements and Bug Fixes

Compatibility with NI-DNET 1.x

Credits

Documentation

The NI-Industrial Communications for DeviceNet Help explains how to install, configure, and use the NI-Industrial Communications for DeviceNet software to control DeviceNet networks. It includes:

• How to install NI-Industrial Communications for DeviceNet software
• How to configure NI-Industrial Communications for DeviceNet hardware
• How to get started with NI-Industrial Communications for DeviceNet software
• How to configure a DeviceNet Network and develop the DeviceNet application in LabVIEW
• Measurement & Automation Explorer Help for NI-Industrial Communications for DeviceNet
  

Open this document from Start»All Programs»National Instruments»NI-Industrial Communications for DeviceNet.

Online help for NI-Industrial Communications for DeviceNet features within Measurement & Automation Explorer (MAX) is in the MAX Help Topics menu and National Instruments on the Web menu.

Supported Operating Systems

You must install and run the NI-Industrial Communications for DeviceNet software on the following operating systems:

• Windows 7 x64 Edition (64-bit version)
• Windows 7 (32-bit version)
• Windows Server 2008 R2 (64-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Vista x64 Edition (64-bit version)
• Windows Vista (32-bit edition)
• Windows XP
  

Supported Hardware

The National Instruments DeviceNet hardware products supported by the NI-Industrial Communications for DeviceNet software are listed below, and are fully compliant with the DeviceNet Specification.

• PCI-8532—Compliant with the PCI Local Bus Specification. This hardware allows you to use a PC-compatible computer with PCI Local Bus slots to communicate with and control DeviceNet devices.
• PXI-8532—Compliant with the PXI Specification and CompactPCI Specification. This hardware allows you to use your PXI or CompactPCI chassis to communicate with and control DeviceNet devices.
  

The maximum number of devices you can connect to a DeviceNet interface depends on the electrical characteristics of the devices on the network. If all of the devices on the network meet the DeviceNet specifications, 64 devices may be connected to the network.

The NI-Industrial Communications for DeviceNet software does not support older DeviceNet hardware products such as PCI-DNET, PCMCIA-DNET, and PXI-8461/D. Those products require an NI-DNET 1.x driver.

Supported Development Environments

The NI-Industrial Communications for DeviceNet software supports the following development environments:

• LabVIEW 2011 (32-bit)
• LabVIEW Real-Time 2011
• LabVIEW 2010 (32-bit)
• LabVIEW Real-Time 2010
• LabVIEW 2009 (32-bit)
• LabVIEW Real-Time 2009
  

Improvements and Bug FixesNI-Industrial Communications for DeviceNet 2.0.2

Support for LabVIEW 2011 and LabVIEW Real-Time 2011.

Bug ID 288931. DeviceNet deployment executable fails to execute on a machine without LabVIEW. This is fixed.

NI-Industrial Communications for DeviceNet 2.0.1

Support for LabVIEW 2010 and LabVIEW Real-Time 2010.

NI-Industrial Communications for DeviceNet 2.0

Support for NI DeviceNet hardware (PCI-8531 and PXI-8531).

Support for LabVIEW 2009 and LabVIEW Real-Time 2009.

Compatibility with NI-DNET 1.x

NI-Industrial Communications for DeviceNet 2.0.x is completely separate from NI-DNET 1.x. It is not an update for NI-DNET 1.x, which means that an application using NI-DNET 1.x is not compatible with NI-Industrial Communications for DeviceNet 2.0.x. However, both NI-Industrial Communications for DeviceNet 2.0.x and NI-DNET 1.x may be installed and used on the same system.

Credits

This product includes components that use the Expat XML Parser. Regarding the Expat XML Parser, the following notice applies:

Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.