NI-FGEN 16.0.0 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序16.0.0

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-FGEN 16.0.0 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序16.0.0

NI-FGEN
NI-FGEN为使用NI波形发生器产品的客户提供支持。
NI-FGEN是一款NI仪器驱动程序，可实现复杂测量解决方案所需的频率扫描和跳频、波形链接和循环以及频移键控(FSK)调制。 NI-FGEN驱动程序可兼容可互换虚拟仪器(IVI)，它具有一系列操作和属性，可以执行波形或信号发生器的功能，并提供交互式软件前面板和示例。

Win32/64Eng/Jpn
16.0
文件大小: 1928154500 字节 (1.80 GB)
修改日期: 2019-06-25 03:08
MD5: 547c65047731c3de2b970ebc7b6efd91（官方正确）
SHA1: 1f10370d34afb49d015d8d5c1874d712e72ffd37
SHA256: 5d024098cf79eb67cb79f073f6604fa89286f5cf448941c693637df3858dc304
CRC32: 683ed4a3

百度网盘与NI官方下载地址：
FGEN16.0.0.txt (590 Bytes, 下载次数: 0, 售价: 10 元)

2021-1-17 23:36 上传

点击文件名下载附件

NI-FGEN 16.0 Readme

August 2016

Thank you for using NI-FGEN. This file contains important information about NI-FGEN and is organized into the following sections:

New Features

Supported Hardware

System Requirements

Installed Software, Documentation, and Examples

Executable

Documentation

Accessing VIs and Functions

Finding Examples

NI Software Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

Product Security and Critical Updates

Driver Version Naming Changes

Uninstalling/Modifying NI-FGEN

Upgrading Firmware

Known Issues

Bug Fixes

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Legal Information

---

New Features

NI-FGEN 16.0 adds support for LabVIEW 2016 (32- and 64-bit).

NI-FGEN 15.0 adds support for LabVIEW 2015 (32- and 64-bit).

NI-FGEN 14.0 adds support for LabVIEW 2014 (32- and 64-bit).

NI-FGEN 2.9.4 includes the following new features:

• Enhanced support for filter group delay compensation for NI PXIe-5442 Rev D or higher.
• Support for allowing I/Q rates up to 400 MS/s when using onboard signal processing mode on the NI PXIe-5450/5451.
  

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product	Supported Under Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)1	Supported Under Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)
NI PXI/PCI-5401 Function Generator	X2	√
NI PXI/PCI-5402 Function Generator	√	√
NI PXI-5404 Frequency Generator	√3	√
NI PXI/PCI-5406 Function Generator	√	√
NI PXI/PCI-5411 Arbitrary Waveform Generator	X2	√
NI PXI/PCI-5412 Arbitrary Waveform Generator	√	√
NI PXI/PCI-5421 Arbitrary Waveform Generator	√	√
NI PXI-5422 Arbitrary Waveform Generator	√	√
NI PXI/PCI-5431 Video Signal Generator	X2	√
NI PXI-5441 Arbitrary Waveform Generator with Onboard Signal Processing	√	√
NI PXIe–5442 Arbitrary Waveform Generator with Onboard Signal Processing	√	√
NI PXIe–5450 Dual-Channel I/Q Generator with Onboard Signal Processing	√	√
NI PXIe–5451 Dual-Channel Arbitrary Waveform Generator with Onboard Signal Processing	√	√
1 MXI Express and MXI-4 are supported on Windows 10/8.1/7. 2Simulating these devices is also not supported on Windows 8.1/7, using either the NI-FGEN or the NI-FGEN Soft Front Panel. Simulating a device that is not supported on your operating system results in indeterminate behavior. 3 Windows 8.1/7 support for the NI 5404 does not include support for external calibration. Perform external calibration for the NI 5404 on Windows XP operating systems.

Device-specific information about these signal generators is included in the NI Signal Generators Help.

System RequirementsSupported Operating Systems

NI-FGEN 16.0 and later supports the following operating systems:

• Windows 10/8.11/7 SP12 (32-bit and 64-bit)
• Windows Server 2012 R21 (64-bit)
• Windows Server 2008 R2 SP12 (64-bit)
  

1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with an SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

Note   NI-FGEN 16.0 and later does not support Windows Server non-R2 editions.

NI recommends that you have the most recent service pack for your operating system installed.

Supported Real-Time Operating Environments

NI-FGEN 16.0 and later supports the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows™/CVI™ Real-Time Module
  

Minimum Requirements

• Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
• RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)
• A screen resolution of 1,024 x 768
• Windows 10/8.1/7 with all available critical updates and service packs
  

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-FGEN. To add support for ADEs installed after installing NI-FGEN, modify your NI-FGEN installation or launch the NI-FGEN installer again.

• NI LabVIEW 2013 SP1, 2014 SP1, 2015 SP1, or 2016
• LabVIEW Real-Time Module 2013 SP1, 2014 SP1, 2015 SP1, or 2016 (no support for NI PXI/PCI-5401/5411/5431 devices)
• LabWindows/CVI 2013 or later
• LabWindows/CVI Real-Time Module 2013 or later (no support for NI PXI/PCI-5401/5411/5431 devices)
• Microsoft Visual C++ (MSVC) 6.0 or later
• Measurement Studio 6.0 or later
  

Installed Software, Documentation, and ExamplesInstalled Software

• is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
• is an alias for the following National Instruments file folder location:
  
  • (32-bit) Program Files\IVI Foundation\IVI\
  • (64-bit) Program Files (x86)\IVI Foundation\IVI\

    Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: (32-bit) Program Files\IVI\ (64-bit) Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • (64-bit) Program Files\IVI Foundation\IVI\

    Note	$(IVIROOTDIR64) is configured as an environment variable on the target system.

    
    
  
  

File Locations

Item	Installed Location
NI-FGEN	\Drivers\niFgen
NI-FGEN Function Panel	\Drivers\niFgen\niFgen.fp
NI-FGEN Examples	\NI-FGEN\Examples
NI-FGEN Header files	\Include
NI-FGEN Import Library files (32-bit)	\Lib
NI-FGEN Import Library files (64-bit)	\Lib_x64
NI-FGEN DLL (32-bit)	\Bin

Additional File Locations for 64-bit operating systems

Item	Installed Location
NI-FGEN Function Panel	\Drivers\niFgen\niFgen.fp
NI-FGEN Header files	\Include
NI-FGEN Import Library files (64-bit)	\Lib_x64
NI-FGEN DLL (64-bit)	\Bin

Executable

Select Start»All Programs»National Instruments»NI-FGEN»FGEN Soft Front Panel to launch the NI-FGEN Soft Front Panel.

Documentation

Documentation for NI-FGEN is located at Start»All Programs»National Instruments»NI-FGEN»Documentation. The documentation set is composed of the following documents.

Document	Format	Description
NI Signal Generators Help	HTML/Windows Help	Contains primary help content for NI-FGEN products. The help is an HTML version of a traditional user manual that includes the following information: An introduction to NI-FGEN Hardware device information How to get started with application development A complete reference for all NI-FGEN programming functions and VIs
Getting Started Guide for your device	Printed and PDF	Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
Specifications for your device	PDF	Lists technical specifications for your device.
Calibration Procedures for your device	PDF	Contains calibration instructions for your device.
NI-FGEN Readme	HTML (this document)	Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
Introduction to niFgen	HTML	Contains information about driver documentation, examples, connecting to your instrument, configuring instrument settings, and known issues.
NI-FGEN IVI Compliance Document	TXT	Contains information about IVI compliance.

For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

To use the .NET API, you must install the the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.

Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.

Accessing VIs and Functions

To access the LabVIEW sample projects and templates from the New Project dialog, select Sample Projects in the left pane and navigate to the project that best matches your application requirements.

NI-FGEN palette VIs are available from the Functions»Measurement I/O»NI-FGEN palette.

NI-FGEN functions are available in LabWindows/CVI from the Instrument menu. To load the NI-FGEN function panel (.fp), select Instrument»Load, and navigate to \Drivers\niFgen\niFgen.fp.

Finding Examples

In LabVIEW, you can use the NI Example Finder to search or browse examples. NI–FGEN examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–FGEN and Modulation Toolkit examples) and their descriptions:

• Click the Browse tab to locate modulation examples by task at Hardware Input and Output»Modular Instruments»NI–FGEN or by directory structure at instr»niFgen.
• Click the Search tab to search all installed examples by keyword. For example, search for "FGEN" to locate all NI signal generator examples.
  

The NI Example Finder is also available in LabWindows/CVI by selecting Help»Find Examples.

You can also access all the installed NI-FGEN examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»NI-FGEN»NI-FGEN Examples.

Examples also are available online that demonstrate integrating NI signal generators with NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.

NI-FGEN 16.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

With this release, NI-FGEN drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-FGEN 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-FGEN 16.0 to an unsupported OS. Additionally, after installing NI-FGEN 16.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Driver Version Naming Changes

NI-FGEN versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: . For example, NI-FGEN 15.0 is the version released with LabVIEW 2015. The last version released under the old numbering scheme is NI-FGEN 2.9.4. The first version released under the new numbering scheme is NI-FGEN 14.0.

Uninstalling/Modifying NI-FGEN

For Windows 7, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-FGEN 16.0 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 10/8.1, complete the following steps:

• Right-click on the Start button.
• Select Control Panel.
• Select Programs» Programs and Features.
• Select National Instruments Software.
• Click the Uninstall button.
• Select NI-FGEN 16.0 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-FGEN 16.0 installation, the following software is installed. To completely remove the NI-FGEN 16.0 installation from your system, you must also remove all of the following packages:

• NI-FGEN Runtime 16.0
• NI Hierarchical Waveform Storage 16.0
• NI IVI Compliance Package 16.0
• NI Measurement & Automation Explorer 16.0
• NI-DAQmx 15.0
• NI-DAQmx MAX Configuration Support 15.0
• NI-DAQmx Runtime 16.0 with Configuration Support
• NI-VISA 16.0
• NI IO Trace 15.0
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Upgrading Firmware

The NI PXIe-5442, NI PXIe-5450, and NI PXIe-5451 have upgradeable device firmware. It is highly encouraged and may be required that you upgrade the firmware on these devices; newer firmware contains new features and important bug fixes. To update the firmware, run the Firmware Updater application for your device (54xxFirmwareUpdater_X.Y.Z.exe, where 54xx is the name of the device and X.Y.Z is the firmware version) that is installed in the Program Files\IVI Foundation\IVI\Drivers\niFgen\ directory or the Program Files (x86)\IVI Foundation\IVI\Drivers\niFgen\ directory. This application upgrades your firmware to the latest available version that works with this driver. After the application runs, you are required to power down your computer and PXI Express chassis to complete the firmware update.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-FGEN 16.0 Known Issues at ni.com/info and enter the Info Code exb3in for an up-to-date list of known issues in NI-FGEN 16.0.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in NI-FGEN. This is not an exhaustive list of issues fixed in the current version of NI-FGEN. If you have a CAR ID, you can search this list to validate that the issue has been fixed.

The following items are changes in NI-FGEN 2.9.1 from NI-FGEN 2.9.

ID	Fixed Issue
317520	Fixed an issue in which an error occurred when trying to build an installer in LabVIEW for an NI-FGEN 2.9 executable.

The following items are changes in NI-FGEN 2.9 from NI-FGEN 2.8.1.

ID	Fixed Issue
242645	Fixed an issue in which NI-FGEN does not report the correct error when LabVIEW FPGA 2010 is installed. You must install LabVIEW FPGA 2010 SP1 for this bug fix.
240183	Fixed an issue in which using dynamic FPGA interfaces in the LabVIEW FPGA Module were not supported when using peer-to-peer streaming. You must install NI-RIO 3.5.1 for this bug fix.
280577	Fixed an issue in which NI-FGEN returns an incorrect error description when an invalid session handle is passed into NI-FGEN VIs.
314922	Fixed an issue in which NI-FGEN returns an incorrect maximum waveform size after you call the niFgen Clear Arbitrary Memory VI on NI PXIe-5450 and NI PXIe-5451.
313189	Fixed an issue in which LabVIEW could crash when reading the Gain DAC Value property.
N/A	Fixed an issue in which NI-FGEN could return an unrecoverable error when transitioning to the Committed state by calling the niFgen Commit VI, the niFgen_Commit function, or calling a create or write waveform VI or function. You must install NI-DAQmx 9.0 or later for this bug fix.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

---

Legal Information

Copyright

© 2007–2016 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

374945B-01