NI-SCOPE 14.1.1 Patch Win32/64 Eng/Jpn NI示波器驱动程序SCOPE14.1.1补丁

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-SCOPE 14.1.1 Patch Win32/64 Eng/Jpn NI示波器驱动程序SCOPE14.1.1补丁

NI-SCOPE
NI-SCOPE为使用NI示波器产品的客户提供支持。
NI-SCOPE仪器驱动可帮助您进行多记录采集、连续采集、多板同步，并利用超过50个测量和分析函数以及传统示波器的功能。NI-SCOPE是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
14.1.1Patch
文件大小: 48306758 字节 (46.07 MB)
修改日期: 2015-06-18 23:55
MD5: 04572deb48325bd3b17d6549ee0d9e81（官方正确）
SHA1: a980585b6cee36a6d7cb1d59ff0c5d6979064dc0
SHA256: 6345c74806def1dc4b5258bfaa68a3a2bea1a8fc8acb8ddc1d8a7b17a5a32c22
CRC32: 48c02f84

百度网盘与NI官方下载地址：
SCOPE14.1.1Patch.txt (603 Bytes, 下载次数: 0, 售价: 1 元)

2021-3-16 23:57 上传

点击文件名下载附件

NI-SCOPE Readme

Version 14.1

---

Thank you for using NI-SCOPE. This file contains important information about NI-SCOPE and is organized into the following sections:

New Features

Supported Hardware

System Requirements

Installed Software, Documentation, and Examples

Executable

Documentation

Accessing VIs and Functions

Product Security and Critical Updates

Driver Version Naming Changes

Uninstalling/Modifying NI-SCOPE

Programming in NI-SCOPE

Known Issues

Bug Fixes

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8.x

NI-SCOPE Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

Legal Information

---

New Features

NI-SCOPE 14.1 includes the following new features:

• Support for the NI PXIe-5105 and the NI PXIe-5114
• Debugging for the NI-SCOPE Soft Front Panel
  

NI-SCOPE 14.0 adds support for LabVIEW 2014.

NI-SCOPE 4.1.3 adds a bug fix for VIs in LabVIEW 2013.

NI-SCOPE 4.1.1 adds a critical bug fix for an issue affecting NI PXIe-5185/5186 digitizers.

NI-SCOPE 4.1 includes the following new features:

• Support for the NI PXIe-5160, 2.5 GS/s high-speed digitizer
• NI-P2P support for the NI PXIe-5160 and the NI PXIe-5162
  

NI-SCOPE 4.0.5 adds support for LabVIEW 2013.

NI-SCOPE 4.0 adds support for the NI PXIe-5162, 5 GS/s high-speed digitizer.

NI-SCOPE 3.9.7 redesigns the NI-SCOPE Soft Front Panel.

NI-SCOPE 3.9.6 adds 1MOhm support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers (new model)

NI-SCOPE 3.9.4 adds support for LabVIEW 2012.

NI-SCOPE 3.8.9 adds support for NI-RFSA 2.5.2.

NI-SCOPE 3.8.8 adds a critical bug fix for the NI PXI-5900 digitizer.

NI-SCOPE 3.8.7 adds critical bug fixes for NI PXIe-5185/5186 digitizers.

NI-SCOPE 3.8.6 adds support for NI-RFSA 2.5.

NI-SCOPE 3.8.5 includes the following new features:

• Support for LabVIEW 2011
• Addition of the following NI-TClk functions/VIs and attributes/properties:
  
  

  LabVIEW VI	C/C++ Function
  niTClk Setup For Sync Pulse Sender Synchronize	niTClk_SetupForSyncPulseSenderSynchronize
  niTClk Synchronize to Sync Pulse Sender	niTClk_SynchronizeToSyncPulseSender
  niTClk Finish Sync Pulse Sender Synchronize	niTClk_FinishSyncPulseSenderSynchronize

  
  

  Labview Property	C/C++ Attribute
  NI-TClk SyncPulseSender:External Pulse Source	NITCLK_ATTR_SYNC_PULSE_SENDER_SYNC_PULSE_SOURCE

  
  

NI-SCOPE 3.8 includes the following new features:

• Support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers
• Support for including NI-SCOPE run-time in custom installers built using National Instrument Application Development Environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using National Instruments high-speed digitizers.
  Notes:
  
  
  • The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), NI SignalExpress, or the NI-SCOPE Soft Front Panel.
  • The run-time installer does not support upgrading from NI-SCOPE 3.6.x or earlier and NI-DAQmx 8.9.x or earlier.
  • The run-time installer does not support the NI 5102, NI 5112, NI 5620, or NI 5621.
    
  
  

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product	Supported Under Windows XP1	Supported Under Windows 8.1 (32-bit)/8 (32-bit)/7 (32-bit)/Vista (32-bit)1	Supported Under Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit)
NI PXI/PCI-5102	Yes	Yes	No
NI PCMCIA/USB/AT-51021	Yes	No	No
NI PXI/PXIe/PCI-5105	Yes	Yes	Yes
NI PXI/PCI-5112	Yes	Yes	No
NI PXI/PXIe/PCI-5114	Yes	Yes	Yes
NI PXI/PXIe/PCI-5122	Yes	Yes	Yes
NI PXI/PCI-5124	Yes	Yes	Yes
NI USB-5132/5133	Yes	Yes	Yes
NI PXI/PCI-5142	Yes	Yes	Yes
NI PXI/PCI-5152	Yes	Yes	Yes
NI PXI/PCI-5153	Yes	Yes	Yes
NI PXI/PCI-5154	Yes	Yes	Yes
NI PXIe-5160/5162	Yes	Yes	Yes
NI PXIe-5185/5186	Yes	Yes	Yes
NI PXI-5620	Yes	Yes	No
NI PXI-5621	Yes	No	No
NI PXIe-5622	Yes	Yes	Yes
NI PXI-5900	Yes	Yes	Yes
NI PCI-59112	Yes	No	No
NI PXI/PCI-5922	Yes	Yes	Yes
1MXI Express and MXI-4 are supported on Windows 8.1/8/7/Vista/XP, but MXI-3 is supported only on Windows XP. 2NI PCMCIA/USB/AT-5102 and NI PCI-5911 are Legacy products.

Device-specific information about these modules is included in the NI High-Speed Digitizers Help.

System RequirementsSupported Operating Systems

NI-SCOPE 14.1 and later support the following operating systems:

• Windows 8.1 (32-bit and 64-bit)
• Windows 8 (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 3 (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

NI recommends that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-SCOPE 3.6 or earlier.

Supported Real-Time Operating Environments

NI-SCOPE 14.1 and later support the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows™/CVI™ Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows XP Service Pack 3 (SP3): 128 MB
  • Windows Vista: 512 MB
  • Windows 8.1/8/7: 1 GB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 8.1/8/7/Vista/XP SP3, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows XP SP3: 256 MB
  • Windows 8.1/8/7/Vista: 1 GB
    
• A screen resolution of 1024 x 768
• Windows 8.1/8/7/Vista/XP SP3, with all available critical updates and service packs
  

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-SCOPE. To add support for ADEs installed after installing NI-SCOPE, modify your NI-SCOPE installation or launch the NI-SCOPE installer again.

• 2011 SP1 (32- and 64-bit), 2012 SP1 (32- and 64-bit), 2013 (32- and 64-bit), 2014 (32- and 64-bit)
• LabVIEW Real-Time Module 2011 SP1, 2012 SP1, 2013, or 2014
  
  Note: Not all devices are supported by the LabVIEW Real-Time Module.

  LabVIEW Real-Time Module Supported Hardware

  NI 5105

  NI 5114

  NI 5122

  NI 5124

  NI 5142

  NI 5152

  NI 5153

  NI 5154

  NI 5160

  NI 5162

  NI 5185

  NI 5186

  NI 5622

  NI 5900

  NI 5922

• LabWindows/CVI 2009 or later
• LabWindows/CVI Real-Time Module 2010 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
• If you are running your application on an RT target, 128 MB of memory or more is required.
  

Installed Software, Documentation, and ExamplesInstalled Software

• is an alias for the following National Instruments file folder location:
  
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows 8.1/8/7/Vista: Users\Public\Documents\National Instruments
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 8.1 (32-bit)/8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI Foundation\IVI\
  • Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI Foundation\IVI\

    Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows 8.1 (32-bit)/8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI\ Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files\IVI Foundation\IVI\
    Note  $(IVIROOTDIR64) is configured as an environment variable on the target system.
    
    
  
  

File Locations

Item	Installed Location on Windows 8.1/8/7/Vista/XP
NI-SCOPE	\Drivers\niScope
NI-SCOPE Function Panel	\Drivers\niScope\niScope.fp
NI-SCOPE Examples	\niScope\Examples
NI-SCOPE Header files	\Include
NI-SCOPE Import Library files (32-bit)	\Lib
NI-SCOPE Import Library files (64-bit)	\Lib_x64
NI-SCOPE DLL (32-bit)	\Bin
NI-SCOPE Firmware Updaters	Program Files\NI-DAQ\fpgafiles

Additional File Locations for Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit)

Item	Installed Location on Windows 8.1 (64-bit)/8 (64-bit)/7 (64-bit)/Vista (64-bit)
NI-SCOPE Function Panel	\Drivers\niScope\niScope.fp
NI-SCOPE Header files	\Include
NI-SCOPE Import Library files (64-bit)	\Lib_x64
NI-SCOPE DLL (64-bit)	\Bin
NI-SCOPE Firmware Updaters	Program Files (x86)\NI-DAQ\fpgafiles

Executable

Select Start»All Programs»National Instruments»NI-SCOPE»NI-SCOPE Soft Front Panel to launch the NI-SCOPE Soft Front Panel.

Documentation

Documentation for NI-SCOPE is located at Start»All Programs»National Instruments»NI-SCOPE»Documentation. The documentation set is composed of the following documents.

Document	Format	Description
NI High-Speed Digitizers Help	HTML/Windows Help	Contains primary help content for NI high-speed digitizer products. The help is an HTML version of a traditional user manual that includes the following information: An introduction to high-speed digitizers and NI-SCOPE Hardware device information How to get started with application development A complete reference for all NI-SCOPE programming functions and VIs
Getting Started Guide for your device	Printed and PDF	Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
Specifications for your device	Printed and PDF	Lists technical specifications for your device.
Calibration Procedures for your device	PDF	Contains calibration instructions for your device.
NI-SCOPE Readme	HTML (this document)	Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.

For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Accessing VIs and Functions

NI–SCOPE palette VIs are available from the Functions»Measurement I/O»NI–SCOPE palette.

NI–SCOPE functions are available in LabWindows/CVI from the Instrument menu. To load the NI–SCOPE function panel (.fp), select Instrument»Load, and navigate to IVI\Drivers\niSCOPE\niSCOPE.fp.

You can also access all the installed NI–SCOPE examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»NI–SCOPE»Examples.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Driver Version Naming Changes

NI-SCOPE versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName>. For example, NI-SCOPE 14.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-SCOPE 4.1.3. The first version released under the new numbering scheme is NI-SCOPE 14.0.

Installing/Uninstalling/Modifying NI-SCOPEInstalling NI-SCOPE

This section provides information on installing NI-SCOPE and NI-DAQ and upgrading from previous versions of NI-SCOPE.

NI-SCOPE installs NI-DAQ if it is not already installed, or if an earlier version of NI-DAQ is installed. NI-DAQ support files will be installed if you have LabVIEW or LabWindows/CVI in your system. However, the only component that NI-SCOPE needs from NI-DAQ is the device driver.

Upgrading from a Previous Version of NI-SCOPE

Upgrading from NI-SCOPE 1.0 and 1.1—NI-SCOPE does not install over NI-SCOPE 1.0 or 1.1. You must uninstall these versions of NI-SCOPE before installing a later version of NI-SCOPE.

Upgrading from NI-SCOPE 1.5 and later—NI-SCOPE automatically uninstalls any previous version that is greater or equal to 1.5. If you have modified any old examples, these will be overwritten by the new versions.

Uninstalling/Modifying NI-SCOPE

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add or Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-SCOPE 14.1 from the dialog box that appears.
• Select Driver Runtime.
• Click Remove to uninstall the product(s); click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-SCOPE 14.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 8.1/8, complete the following steps:

• Right-click on the Start screen.
• Select All apps, and launch the Control Panel.
• Select Programs» Programs and Features.
• Select National Instruments Software.
• Click the Uninstall button.
• Select NI-SCOPE 14.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI–SCOPE installation, the following software is installed. To completely remove the NI-SCOPE installation from your system, you must also remove all of the following packages:

• NI IVI Compliance Package 4.4
• NI-DAQmx 9.3.5
• Traditional NI-DAQ 7.4.4
• NI Measurement & Automation Explorer 14.0
• NI Hierarchical Waveform Storage 14.0
• NI Spy 2.7.2
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Programming in NI-SCOPE

NI-SCOPE provides an intuitive, full-featured interface for programming your hardware. NI-SCOPE is IVI-Scope compliant. For more information, refer to niScopeIVIComplianceDocument.txt.

Software Examples

NI-SCOPE ships with several examples for LabVIEW, LabWindows/CVI, Measurement Studio, MSVC, Visual C++, and Microsoft Visual Basic that will help you develop your software. These examples illustrate how to perform the most common operations with your hardware. To find the examples, go to Start» Programs»National Instruments»NI-SCOPE»Examples.

NI-SCOPE Soft Front Panel

The NI-SCOPE Soft Front Panel (SFP) is a software oscilloscope application for NI high-speed digitizers. It has the following features:

• Familiar interactive user interface
• Robust architecture
• Scalar measurements
• Save/load waveforms
• Save/load configurations
• Low CPU usage
  

The NI-SCOPE SFP demonstrates some of the capabilities of NI high-speed digitizers and enables you to start using your new digitizer immediately without the need to know a programming language. The NI-SCOPE SFP is installed by default as a feature of the NI-SCOPE installation. To remove the NI-SCOPE SFP use the Add/Remove Programs option.

---

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-SCOPE 14.1.

Bug Fixes

The following list contains changes from earlier versions of NI-SCOPE to NI-SCOPE 14.1. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-SCOPE.

ID	Fixed Issue
486791	Fixed an issue where setting the Vertical Coupling attribute to Ground on a NI PXIe-5185/5186 would return undefined behavior for some ranges.
439447	Fixed an issue where NI-SCOPE VIs installed into LabVIEW 2013 were not mass compiled.
425102	Fixed an issue in the NI-SCOPE driver software that affects the NI PXIe-5185/5186 that may cause data corruption when performing a multi-record acquisition. For more information about this issue, visit ni.com/kb and enter 6DQG890S.
257093	Fixed an issue where setting the Vertical Coupling attribute to Ground on a PXI-5922 would return the following error: "Internal Software Error occured in Scopes software. Please contact National Instruments Support."
381159	Fixed an issue where calling niScope_Abort on a NI PXIe-5162 digitizer while an acquisition is in progress would cause the aborted record to be lost.
380799	Fixed an issue where using the PXIe-5162 with Distributed TClk would result in up to but less than 6.4ns of TClk skew between sync pulse senders, with the skew varying each time the sync pulse senders are synchronized.
405834	Fixed an issue where the PXI-5900 would not initialize, producing IVI error 1074135028.
368402	Fixed an issue where enabling 3, 5, 6, or 7 channels on the NI 5105 would cause a subsequent Fetch to return fewer samples than requested.
257481	Fixed an issue where the Preferred Packet Size and Maximum Bandwidth properties had no effect for the NI PXIe-5185 and NI PXIe-5186.
328318	Fixed an issue that caused NI-SCOPE 3.7 to not support Visual Basic 6.
341670	Fixed an issue where the NI-SCOPE Soft Front Panel does not launch under certain conditions.
336845	Fixed an issue where TClk synchronization is not consistent between multiple sessions when using NI PXIe-5185 or NI PXIe-5186.
327321	Fixed an issue where NI PXI-5105 returns incorrect data at low sample rates (<20 kS/s) if the channel list size is not a power of 2.
315548	Fixed an issue that caused the first channel in the channel list to return incorrect data when using the niScope EX Fetch Forever VI with multiple channels. You can find this example VI at Start» Programs»National Instruments»NI-SCOPE»Examples.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.x Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.x Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.x Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI-SCOPE Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments NI-SCOPE will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-SCOPE that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

---

Legal Information

Copyright

© 1999–2014 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.