NI System Configuration 18.0 RTE Linux32/64 中文/德语/日语/法语/英文/韩语 NI系统配置nisycfg18.0运行版

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI System Configuration 18.0 RTE Linux32/64 中文/德语/日语/法语/英文/韩语 NI系统配置nisycfg18.0运行版

System Configuration系统配置
System Configuration包含了一些实用程序，使您可以监视和控制系统中的各种NI设备。
System Configuration包含Measurement＆Automation Explorer (MAX)、I/O Trace和Device Monitor。MAX是一个配置实用程序，用于访问NI设备。I/O Trace用于监测、记录和显示应用程序发出的NI API调用。Device Monitor可在系统检测到NI设备时启动应用程序。System Configuration支持LabVIEW和LabWindows/CVI等应用软件以及Microsoft Visual Studio和相关的编程语言。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。

Linux32/64中文, 德语, 日语, 法语, 英文, 韩语
18.0RTE
文件大小: 9824256 字节 (9.37 MB)
修改日期: 2018-06-27 23:15
MD5: 20a19f7847f0d23af8f15a39bf8e7c9b（官方正确）
SHA1: 8c2afd18ef59b638277f3f34a4013868c550187e
SHA256: fb983dd13ce91602fd7203d3993aecce0105872b5183fbf5356f47e9e326b8ab
CRC32: 6d6cbb3d

百度网盘与NI官方下载地址：
SYSCFG Linux 18.0RTE.txt (642 Bytes, 下载次数: 0, 售价: 5 元)

2021-3-18 23:20 上传

点击文件名下载附件

NI System Configuration 18.0 for Linux x86 32-bit/x64 64-bit
May 2018

--------------------------------------------------------------------------------
This file contains late-breaking news about NI System Configuration and
supersedes any information found in other documentation included in the
distribution. Refer to ni.com/linux for the most recent information about Linux
support at National Instruments.
--------------------------------------------------------------------------------


System Requirements
Installation
FAQs
Examples
Documentation and Help
Linux Limitations
Known Issues
Legal Information

-------------------
System Requirements
-------------------
System Configuration for Linux software for the Intel x86 32-bit and x64
64-bit architectures has been tested on the following distributions:
        Red Hat Enterprise Linux 6
        Red Hat Enterprise Linux 7
        CentOS 7
        openSUSE LEAP 42.2
        openSUSE LEAP 42.3
        
For more information about supported Linux versions and distributions supported
by National Instruments, refer to ni.com/linux.

System Configuration for Linux requires at least 35 MB of disk space.

------------
Installation
------------
The installation process compiles a small amount of code to customize
the software to your installation.  Before running the installer, you must have
the following compiler facilities installed from your Linux distribution CD
or other Linux distribution medium:

* The kernel source files that exactly correspond to the kernel version
  you are running
* The GCC compiler and C++ support
* The make utility

Use the software-install facility of your Linux distribution to verify that the
above-listed packages are present. You can then begin installation.

Complete the following steps to install System Configuration:

Run the INSTALL script from this directory as root. The INSTALL script
ensures that all requirements are met and installs the System Configuration
software. The script installs the software into /usr/local and uses rpm to
install the package on the system.

----
FAQs
----
Q1: What action needs to be taken if I upgrade/change my kernel?

A1: Some action is required to make the existing NI System Configuration
    installation work for the new kernel. After upgrading your kernel,
    run updateNIDrivers utility as root. The utility is located in
    /usr/local/bin. Be sure to have sources for your new kernel properly
    installed on your system before running the utility. The utility
    rebuilds the driver using the new kernel sources and copies it to
    the appropriate location for the new kernel. For the changes
    to take place, you will be asked to reboot your machine after the
    utility completes.

Q2: During installation I get a message similar to the following one:
    "Kernel source does not appear to be configured for the running kernel.
    Configuration of kernel source is required to continue installation."
    I do have kernel sources installed; is there anything else that needs to
    be done?

A2: This problem has been seen on SUSE LINUX Professional 9.1 running the 2.6.5
kernel or newer versions of SUSE LINUX Professional. However, it is possible
that other distributions will require similar steps to resolve this problem.

    On SUSE LINUX Professional complete the following steps:
    1. Ensure you have installed kernel-source and kernel-syms packages
       corresponding to the version of the currently running kernel. The version
       of the currently running kernel can be determined by issuing the command
       `uname -r`.
    2. Change the directory to the /usr/src/linux- directory, where
       corresponds to the currently running kernel version.
    3. Run "make cloneconfig" as root to configure the sources for the
       currently running kernel.
    4. Run "make modules_prepare" as root to prepare the headers for
       compilation.
    5. THIS STEP IS STRICTLY OPTIONAL. Completing this step removes the
       warning:
       WARNING: Symbol version dump /usr/src/linux/Module.symvers is missing,
                modules will have CONFIG_MODVERSIONS disabled.
       Run "make modules" as root to compile all modules and generate
       Module.symvers; this step may take 30 minutes or more to complete.
    6. Run the INSTALL script for System Configuration for Linux
       from this directory.

--------
Examples
--------
This release includes examples showing the use of System Configuration in
LabVIEW. The LabVIEW examples are located in the LabVIEW examples directory.

-------------
Documentation and Help
-------------
Use a web browser to view the System Configuration help at
labview/help/nisyscfg.chm.

-----------------
Linux Limitations
-----------------
Some features discussed in the System Configuration documentation and help
are unavailable on Linux.

- System Configuration supports two application development environments:
  * LabVIEW 2015 or later
  * C and C++ (gcc)

  System Configuration does not support LabWindows/CVI for Linux.

- When using System Configuration in a PXI system, several restrictions
  apply:
  * Control through MXI-4 is supported, but MXI-3 is not.
  * Certain embedded controllers may be recommended over others for use in
    Linux.
  * There may be some restrictions related to routing triggers, events, and
    clocks over the PXI backplane on some PXI chassis models.

- External calibration functions are not supported.  Refer to your hardware
  documentation for information about external calibration, and refer to
  ni.com/calibration.  If your hardware requires external
  calibration, either perform the calibration on a Windows system, or hire
  National Instruments or an independent calibration laboratory to perform the
  calibration.

------------
Known Issues
------------
To access a list of Known Issues for System Configuration 18.0,
visit ni.com/info and enter the Info Code SysCfgKnownIssues.


----------------------
Legal Information
----------------------

---------
COPYRIGHT
---------
(c) 2013-2018 National Instruments.
All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted
in any form, electronic or mechanical, including photocopying, recording,
storing in an information retrieval system, or translating, in whole or in
part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask
our users to do the same. NI software is protected by copyright and other
intellectual property laws. Where NI software may be used to reproduce
software or other materials belonging to others, you may use NI software
only to reproduce materials that you may reproduce in accordance with the
terms of any applicable license or other legal restriction.

For end-user license agreements (EULAs) and copyright notices, conditions, and
disclaimers, including information regarding certain third-party components
used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States
Government ("Government"), the use, duplication, reproduction, release,
modification, disclosure or transfer of the technical data included in this
manual is governed by the Restricted Rights provisions under Federal
Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal
Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for
military agencies.

IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI
Foundation.

The IVI Foundation and its member companies make no warranty of any kind with
regard to this material, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. The IVI Foundation and
its member companies shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing,
performance, or use of this material.


----------
TRADEMARKS
----------
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for
information on NI trademarks. Other product and company names
mentioned herein are trademarks or trade names of their respective companies.

-------
PATENTS
-------
For patents covering the NI products/technology, refer to the
appropriate location: Help籔atents in your software, the patents.txt file on
your media, or the NI Patent Notice at ni.com/patents.

375038F-01