NI FRC LabVIEW 2020 Win32Eng FIRST机器人竞赛软件套件FRC2020(基于LabVIEW2019)

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI FRC LabVIEW 2020 Win32Eng FIRST机器人竞赛软件套件FRC2020(基于LabVIEW2019)

FRC LabVIEW软件
FRC LabVIEW软件提供的组件专为FIRST机器人竞赛（FRC）参与者使用LabVIEW编程机器人而开发。
FRC LabVIEW软件是一个软件套件，为FRC提供了使用LabVIEW所需的软件组件。该套件包括LabVIEW专业版以及LabVIEW Real-Time模块和LabVIEW视觉开发模块等软件附件。FRC LabVIEW软件还包括相关的驱动程序。

发布日期
2019/11/4
包含的版本
2020专业版
受支持的操作系统
Windows 7 (SP1) 32-bit
Windows 7 (SP1) 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
应用程序位数
32位
语言
English
校验和
文件大小: 8281763840 字节 (7.71 GB)
修改日期: 2019-11-04 14:15
MD5: 2bed0a8236a5dd452c96a019450a9ecf（官方正确）
SHA1: ece33650f9227cedd9be57748bc7ff97223c5a44
SHA256: 7e33d9a3d88b34d11af40b3a18656d1d640679ad6c342151fe247d6f15cb9a9e
CRC32: ee2decc2

百度网盘与NI官方下载地址：
FRC LabVIEW2020.txt (607 Bytes, 下载次数: 0, 售价: 30 元)

2022-3-14 18:08 上传

点击文件名下载附件

LabVIEW Software for FRC 2020 Readme

September 2019

The LabVIEW Software for FRC 2020 includes the LabVIEW 2019 Professional Development System and other software components that you can use to program your robot.

To obtain the FRC API, examples, and utilities like the Driver Station and roboRIO Imaging Tool, install the FRC Game Tools 2020 update suite after the FRC kickoff. Visit the FRC Resource Hub for more information about the software updates after kickoff.

---

Installation Options

LabVIEW Software for FRC 2020 has two installation options. Teams Using LabVIEW for robot programming should select installation option 1. Teams using text-based languages should select installation option 2.

1. Installation Instructions for Teams Using LabVIEW for Development

This option allows you to program your robot in LabVIEW, perform vision analysis, and capture from USB cameras.

• Launch the installer. This will initiate a pre-install of NI Package Manager. After the NI package manager installation completes, you will be presented with a list of software to install.
• On the "Select Products" dialog, accept the default selections. This includes:
  
  • LabVIEW (32-bit) English - 2019
  • LabVIEW Real-Time Module English - 2019
  • Vision Development Module - 2019
  • LabVIEW Robotics Module for FRC - 2019
  • NI CompactRIO - 19.0.0
  • NI-IMAQdx driver - 19.0.0
    
• On the "Additional items you may wish to install" dialog, accept the default selections. NOTE: If you do not accept the default selections, it is likely that some components required for programming your robot will not be installed.
• Accept the licensing agreements and proceed through the installation wizard.
  

This option has the following system requirements:

• Operating System: Windows 10/8.1/7 SP1
• Disk Footprint: 15.2 GB
  

2. Installation Instructions for Teams Using Text-Based Languages for Development

This option allows you to perform vision analysis and capture from USB cameras from text-based languages.

• Launch the installer. This will initiate a pre-install of NI Package Manager. After the NI package manager installation completes, you will be presented with a list of software to install.
• On the "Select Products" dialog, select the following:
  
  • Vision Development Module - 2019
  • NI-IMAQdx driver - 19.0.0
    
• On the "Additional items you may wish to install" dialog, accept the default selections. NOTE: If you do not accept the default selections, it is likely that some components required for programming your robot will not be installed.
• Accept the licensing agreements and proceed through the installation wizard.
  

This option has the following system requirements:

• Operating System: Windows 10/8.1/7 SP1
• Disk Footprint: 8.2 GB
  

Additional NI Software

You may also download the following NI software from ni.com and license it using your serial number.

• Multisim Education Edition
• Ultiboard Education Edition
• LabVIEW Statechart Module
  

---

Copyright

© 2009–2019 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

378191A-01