注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 2013.02 LabVIEW2012SP1 Win32/64Eng 视觉采集软件VASFebruary2013
百度网盘下载：
EXE版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
ZIP版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
exe
文件大小: 1717750848 字节 (1.60 GB)
修改日期: 2013-04-13 12:41
MD5: 3362e867af9369ea7528966280ae126a（官方正确）
SHA1: 93c4596b83f43b5c81d4314e9d6ce549e598ea54
SHA256: a8bf49db1d8aa33351d9de19191b2694f352f973e3f3e3e5bb22e9168c657eb1
CRC32: aa449477
zip
文件大小: 1721995505 字节 (1.60 GB)
修改日期: 2020-02-14 22:21
MD5: bad7841d701882c56dff05755e5ec658（官方正确）
SHA1: d35cc1bff1121254a71d01baac3c6c35cc7e1ffc
SHA256: ec272260ef34e8b1cf0d02acbd1a5392c6bfb996de5a7bdad812501016b1043b
CRC32: 8a384c45
NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看
VAS2013.02.txt
(570 Bytes, 下载次数: 41, 售价: 10 元)
NI Vision Acquisition Software Release NotesFebruary 2013 This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections: New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
Minimum System Requirements
Updates and Improvements
Software Support
Installation
Automating the Installation of NI Products
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.
New FeaturesThis release of Vision Acquisition Software includes the following new features: NI-IMAQ 4.7.2NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices. - Support for NI 1712, 1732, 1752, and 1754 Smart Cameras
- Support for LabVIEW 2012 SP1
- In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition
- The ability to decode Bayer-encoded images in Measurement & Automation Explorer (MAX)
- The IMAQ Bayer Color Decode VI and IMAQ Create Bayer LUT VI have been removed from the NI-IMAQ palette. Existing implementations will be unaffected by this change. For new LabVIEW applications, use the new IMAQ Bayer to RGB VI, which is installed with the Vision Development Module, for decoding Bayer-encoded images.
NI-IMAQdx 4.1NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, and IP cameras. - Support for the NI PCIe-8237R GigE Vision interface device
- Support for the NI PCIe-8236 GigE Vision interface device
- Support for LabVIEW 2012 SP1
- In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition
NI-IMAQ I/O 2.6.1NI-IMAQ I/O provides support for reconfigurable input/output (RIO) using National Instruments EVS-1460 Series Embedded Vision Systems, CVS-1450 Series compact vision systems, and other GigE Vision and IEEE 1394 reconfigurable image acquisition devices. - Support for Vision-RIO queued pulse operations on the NI PCIe-8237R
- Support for LabVIEW 2012 SP1
- In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition
- For LabVIEW 2011 and later, new Vision-RIO examples have replaced NI-IMAQ I/O examples
Vision Acquisition Software Express VI- The ability to log acquired images to file
- The ability to decode Bayer-encoded images
- Vision Development Module is no longer required to perform simulated acquisitions
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 CamerasNI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls the Legacy NI-IMAQ for IEEE 1394 Cameras feature of NI-IMAQdx 3.3 or earlier. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/infoand enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx does not affect separate installations of Legacy NI-IMAQ for IEEE 1394 Cameras. Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdxIn most cases, there is a one-to-one correlation between an NI-IMAQdx VI or function and Legacy NI-IMAQ for IEEE 1394 Cameras VI or function. For example, the IMAQ 1394 Snap VI has been replaced with the IMAQdx Snap VI and takes similar parameters. You set and get camera attributes differently for each driver. For example, with Legacy NI-IMAQ for IEEE 1394 Cameras, you passed in an enumerated type that contained the attribute name and a value. With NI-IMAQdx, you pass a string with the attribute name and value. Another major difference between the two drivers is that NI-IMAQdx now supports the Event Structure in LabVIEW. Rather than using occurrences, as you did with Legacy NI-IMAQ for IEEE 1394 Cameras, you can now register the Frame Done event to fire in LabVIEW for more readable code. Maintenance and Support PolicyNational Instruments recommends that all new applications be developed with NI-IMAQdx. All new features, bug fixes, or other enhancements in the future will be made to the NI-IMAQdx driver and API. NI-IMAQ for IEEE 1394 Cameras is "frozen" to ensure that the behavior of existing applications does not change. NI-IMAQdx no longer includes Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you requires Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. National Instruments Applications Engineers no longer support the Legacy NI-IMAQ for IEEE 1394 Cameras API.
Minimum System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software: | Processor | Pentium 4 1 GHz or equivalent | | Memory | 512 MB RAM | | Display | 1,024 × 768 resolution video adapter with a 16-bit display | Minimum Recommended
Free Hard Disk Space | Vision Acquisition Software | 2 GB | | NI-IMAQ | 1 GB | | NI-IMAQdx | 1 GB | | NI-IMAQ I/O | 1.5 GB | | Operating System | Windows 8/7/Vista/XP SP3 (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit) | | Browser | Microsoft Internet Explorer 6.0 or later |
Updates and ImprovementsThe following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module. | ID | Fixed Issue | | 380338 | The initial state of Vision-RIO input lines reads low, even if the line is high. | | 379910 | In certain scenarios, MAX can crash when interacting with NI Vision devices. | | 362755 | clsernat.dll should be installed and registered for 64-bit systems. |
Software SupportThis section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software. Operating Systems- NI-IMAQ and NI-IMAQdx: LabVIEW Real-Time Module 8.6 or later
- NI-IMAQ I/O: LabVIEW Real-Time Module 2009 or later
- Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.
Note NI Vision Acquisition Software does not support Windows Server non-R2 editions.
| Device | Windows 8/7/Vista/XP SP3/Server 2003 R2 32-bit versions | Windows 8/7/Vista/Server 2008 R2 64-bit versions | NI 1405 | Yes | Yes* | NI 1407 | Yes | Yes* | NI 1408 | No | No | NI 1409 | Yes | Yes* | NI 1410 | Yes | Yes* | NI 1411 | Yes | Yes* | NI 1422 | Yes | Yes* | NI 1424 | Yes | Yes* | NI 1426 | Yes | Yes* | NI 1427 | Yes | Yes*† | NI 1428 | Yes | Yes* | NI 1429 | Yes | Yes*† | NI 1430 | Yes | Yes*† | NI 1433 | Yes | Yes*† | NI 1435 | Yes | Yes*† | NI 1473R | Yes | Yes*† | NI 1483 | Yes | Yes* | NI 8231 | Yes | Yes | NI 8234 | Yes | Yes | NI 8235 | Yes | Yes | NI 8236 | Yes | Yes | NI 8237R | Yes | Yes | NI 8252 | Yes | Yes | NI 8254R | Yes | Yes | NI 8255R | Yes | Yes | | * Applications developed using LabVIEW 8.2.1 or later will run on systems with more than 3 GB of physical memory. Applications developed using other development environments, such as Microsoft Visual C, Visual Basic, and .Net, are limited to systems with 3 GB or less of physical memory. All 32-bit applications, including those developed using LabVIEW, may not allocate more than 2 GB of memory total. † A firmware update is available for this device to allow non-LabVIEW applications to run on systems with more than 3 GB of physical memory. To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware. |
Remote Target SupportNI Vision Acquisition Software September 2011 was the last version of NI Vision Acquisition Software to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained. Development Environments- NI-IMAQ and NI-IMAQdx: LabVIEW 8.6 or later
- NI-IMAQ I/O: LabVIEW 2009 or later
- LabWindows/CVI 8.1 or later
- Microsoft Visual C/C++ 6.0 or later
- Microsoft Visual Basic 6.0 or later
- Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)
Additional SoftwareYou can also use NI-IMAQ, and NI-IMAQdx with the following National Instruments software packages to prototype, benchmark, and deploy your applications. - NI Vision Development Module 7.1 or later
- NI Vision Builder for Automated Inspection (Vision Builder AI) 2.5 or later
Installation InstructionsComplete the following steps to install NI Vision Acquisition Software: Note: You must have administrator access to install the NI Vision Acquisition Software. - Insert the NI Vision Acquisition Software installation media.
- If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
- Follow the onscreen instructions.
NI-IMAQ and NI-IMAQdx integrate with MAX, the National Instruments utility for configuring and testing your measurement and automation system. The MAX icon appears on your desktop after you install NI Vision Acquisition Software. Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Configuring NI-IMAQComplete the following steps to install an image acquisition device and configure NI-IMAQ: Note: You must install NI-IMAQ before installing your image acquisition device. Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged. - Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
- Run MAX.
- Double-click the MAX icon on the desktop. You can use MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
- Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
- Select a camera file, and acquire an image.
- Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
- Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
- To change the camera settings, modify the parameters at the bottom of the image viewer panel.
- You can acquire an image in the following ways:
- Use the Snap button to acquire and display a single image with the image acquisition device.
- Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com. Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with MAX. Configuring a Remote PXI/Compact PCIe Image Acquisition DeviceUse MAX to install NI-IMAQ for LabVIEW Real-Time from the host machine onto the target system. The NI-IMAQ for LabVIEW Real-Time components enable the remote device to acquire and analyze images as directed by the host machine. Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the MAX help window to install software. Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices. - Launch MAX.
- In the Configuration tree, expand Remote Systems.
- Expand the appropriate system.
- Expand Devices and Interfaces.
- Expand NI-IMAQ Devices.
- Expand the device you want to configure.
Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.
Configuring NI-IMAQdxComplete the following steps to install and configure NI-IMAQdx. If you are using a USB camera, ensure that the camera is compatible with DirectShow, and that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation. Instructions for configuring an IEEE 1394 or GigE Vision camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx. Installing IEEE 1394 HardwareInstall your IEEE 1394 interface card. Follow the installation instructions provided by the manufacturer. Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps. Installing the Universal GigE Vision DriverNI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps: Configuring Multiple PortsIf you plan to use multiple ports with NI-IMAQdx, complete the following steps: Configuring NI-IMAQdx for WindowsComplete the following steps to configure NI-IMAQdx for Windows: - Connect the camera.
- Run MAX.
- Double-click the MAX icon on your desktop. You can use MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
- Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
- For IEEE 1394 cameras, NI-IMAQdx may not be associated with the camera. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
- Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window. Configuring NI-IMAQdx for the LabVIEW Real-Time ModuleIf you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx: Note: NI-IMAQdx does not support USB cameras on the LabVIEW Real-Time Module.
Known IssuesNI-IMAQ- When allocating several GB of image buffers with NI-IMAQ, the IMAQ Close VI takes longer to execute and free up this memory.
- Error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly, to notify you that an error occurred, but the code is set to an invalid value.
DocumentationThe NI Vision Acquisition Software documentation is installed onto your hard drive with NI Vision Acquisition Software. The documentation ships as Adobe Acrobat portable document format (PDF) files and HTML Help files. To view the NI Vision Acquisition Software documentation, select Start»All Programs»National Instruments»Vision»Documentation. Note: You must have Adobe Acrobat Reader installed to view the PDFs. Refer to the Adobe Systems Incorporated Web site at www.adobe.com to download the latest version of Adobe Reader. NI LabVIEW DocumentationYou can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu. In LabVIEW, select Help»NI Vision for LabVIEW Help. .NET DocumentationThe NI Vision Acquisition Software .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process. The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.
Copyright© 2013 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations: - Notices are located in the directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. | 
发表于 2013-4-12 23:43:06
发表于 2013-7-10 17:12:21
