石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 764|回复: 0

[LV工具模块] LabVIEW Modulation Toolkit 2022 Q4 Win11 32/64bitEng LabVIEW调制工具包22.8

[复制链接]
  • TA的每日心情
    慵懒
    昨天 11:16
  • 签到天数: 3171 天

    连续签到: 41 天

    [LV.Master]2000FPS

     楼主| 发表于 2022-11-15 11:18:14 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    LabVIEW Modulation Toolkit 2022 Q4 Win11 32/64bitEng LabVIEW调制工具包22.8

    LabVIEW调制工具包
    LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能,适用于研究、设计、原型,验证和测试应用。
    LabVIEW调制工具包是LabVIEW的一个软件附件,提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案(包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM)对信号进行调制和解调。使用LabVIEW调制工具包,您可以执行信道编码、交织编码和均衡等等高级信号处理,也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数,以验证信号质量。使用LabVIEW调制工具包,您还可以应用常见的信号减损,并通过星座图、眼图和网格图等可视化工具查看信号。

    LabVIEW Modulation Toolkit调制工具包2022Q4
    发布日期
    2022/10/12
    包含的版本
    22.8.0完整版
    受支持的操作系统
    Windows 11
    Windows Server 2022 64-bit
    Windows 10 64-bit
    Windows Server 2016 64-bit
    Windows Server 2019 64-bit
    应用程序位数
    32/64位
    语言
    英文
    校验和
    文件大小: 718780416 字节 (685.48 MB)
    修改日期: 2022-10-13 09:53
    MD5: 3bce1459a306b573af3103a6a5c24ee2
    SHA1: e807af6dd0e46d7c5ee65757ed2f4bd64d0e853d
    SHA256: feec569b7e8ebf7ffe74d08bbe0f109279bd227c129de78220eee0c5aa78cf94
    CRC32: 5948ffd9

    百度网盘与NI官方下载地址:
    请注册登录视觉论坛账号,购买附件查看下载地址
    LV Modulation2022Q4.txt (573 Bytes, 下载次数: 0, 售价: 10 元)

    LabVIEW Modulation Toolkit 2022 Q4 Readme
    October 2022
    This file contains installation instructions and compatibility information for LabVIEW Modulation Toolkit 2022 Q4.
    You can find more release information on ni.com.
    • LabVIEW Modulation Toolkit Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
    • LabVIEW Modulation Toolkit Documentation: New features, behavior changes, and other documentation

    Overview
    New Features
    Supported Hardware
    System Requirements
    Supported Operating Systems
    Application Software Support
    Installation Instructions
    Accessing the Help
    Finding Examples
    Product Security and Critical Updates
    Behavior Changes
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 11
    Legal Information

    Overview
    LabVIEW Modulation Toolkit provides signal generation and analysis capabilities for analog and digital modulation schemes.
    New Features
    • LabVIEW Modulation Toolkit 2022 Q4 adds support for LabVIEW 2022 Q3 (32- and 64-bit)
    • LabVIEW Modulation Toolkit 21.0 adds support for LabVIEW 2021 (32- and 64-bit)
    • LabVIEW Modulation Toolkit 20.0 adds support for LabVIEW 2020 (32- and 64-bit)
    Supported Hardware
    Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.
    To view information for your device:
    • Select your hardware model in the dropdown list on the page to view compatibility information for your device.
    • Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
    Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.
    System Requirements
    Modulation Toolkit has the following system requirements:
    • Processor—1 GHz or faster 64-bit (x64) Processor or equivalent
    • RAM—4 GB
    • A screen resolution of 1,024 x 768
    • Windows 10 with all available critical updates and service packs
    • If your application runs on an RT target, NI recommends that you have at least 128 MB of RAM
    Supported Operating Systems
    LabVIEW Modulation Toolkit 2022 Q4 supports the following operating systems:
    • Windows 11
    • Windows 10
    • Windows Server 2022
    • Windows Server 2019
    • Windows Server 2016
    Note  
    • LabVIEW Modulation Toolkit no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.
    • NI Software no longer supports Phar Lap ETS Real-Time Operating System. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.
    Application Software Support
    LabVIEW Modulation Toolkit 2022 Q4 supports the following application software versions, including service packs.
    • NI LabVIEW 2019 SP1, 2020 SP1, 2021, or 2022 Q3
    • NI LabVIEW Real-Time Module 2019, 2020, 2021, or 2022 Q3
    Installation Instructions
    Download the LabVIEW Modulation Toolkit installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
    Note   If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
    Accessing the Help
    Refer to the LabVIEW Modulation Toolkit Help, accessible from Start»National Instruments»Modulation Toolkit»Modulation Toolkit Documentation, for information about the LabVIEW Modulation Toolkit Help.
    Finding Examples
    In LabVIEW, you can use the NI Example Finder to search or browse examples. LabVIEW Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:
    • Click the Browse tab to locate modulation examples by task at Toolkit and Modules»Modulation or by directory structure at Modulation.
    • Click the Search tab to search all installed examples by keyword. For example, search for "Modulation" to locate all Modulation Toolkit examples.
    You can also access all the installed LabVIEW Modulation Toolkit examples for LabVIEW at Start»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
    Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
    Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Modulation Toolkit are located in the labview\examples\Modulation directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
    Behavior Changes
    The following are the behavior changes in LabVIEW Modulation Toolkit 2022 Q4 from LabVIEW Modulation Toolkit 21.0.
    • Migrated from msvc 2008 to msvc 14.0.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
    For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
    Using NI Software with Microsoft Windows 11
    Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

    Legal Information
    Copyright
    © 2002–2022 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents

    For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-4-14 15:49

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表