石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 599|回复: 0

[LV工具模块] NI LabVIEW for FTC 2011 Toolkit Win32/64Eng LabVIEW用于FTC科技挑战赛工具包2011

[复制链接]
  • TA的每日心情
    奋斗
    昨天 08:14
  • 签到天数: 3238 天

    连续签到: 108 天

    [LV.Master]2000FPS

     楼主| 发表于 2022-12-5 15:03:29 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    NI LabVIEW for FTC 2011 Toolkit Win32/64Eng LabVIEW用于FTC科技挑战赛工具包2011

    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    发布日期:2011/08/10
    包含的版本:2011
    受支持的操作系统
    Windows
    语言:English
    应用程序位数:32位
    校验和:
    文件大小: 196340320 字节 (187.24 MB)
    修改日期: 2022-03-25 06:04
    MD5: 96058af71401ccf8918ec39a1b3cabda
    SHA1: 83677b2e0b084c254950fa499d7277480f31b354
    SHA256: b8424cf61204277580711c19f22e37860b0edb7e076c89c70709a614d8da6654
    CRC32: 26306713

    百度网盘和NI官方下载地址:
    请注册登录视觉论坛账号,购买附件查看下载地址
    LV4FTC2011.txt (485 Bytes, 下载次数: 0, 售价: 10 元)

    NI LabVIEW for FTC 2011-2012 Toolkit Readme
    August 2011
    This file contains information to introduce you to the LabVIEW for FTC 2011-2012 Toolkit. This file also provides help resources that you can use while working with the LabVIEW for FTC Toolkit.
    Overview
    System Requirements
    Installation Instructions
    Updating the NXT Brick Firmware
    Features and Changes
    Known Issues
    Finding Examples
    Accessing the Help

    Overview
    The LabVIEW for FTC Toolkit contains VIs that are specifically designed to help you program a robot for an FTC competition. Use the LabVIEW for FTC Toolkit with LabVIEW for LEGO® MINDSTORMS® provided in the FTC 2011-2012 Kit to program the NXT brick to control FTC-specific sensors and motors.
    System Requirements
    The LabVIEW for FTC Toolkit has the following requirements:
    • LabVIEW for LEGO MINDSTORMS—You must have LabVIEW for LEGO MINDSTORMS installed on the computer before you download the LabVIEW for FTC Toolkit.

      Refer to the LabVIEW for LEGO MINDSTORMS DVD packaging for information about installing and activating LabVIEW for LEGO MINDSTORMS.
    • (Windows) 37.6 MB of additional disk space
    • (Mac OS X) 17.2 MB of additional disk space
    Installation Instructions
    Complete the following steps to download and install the LabVIEW for FTC Toolkit.
    • Ensure LabVIEW for LEGO MINDSTORMS is closed.
    • Disable any automatic virus detection programs.
    • Visit the National Instruments website at ni.com/info and enter the info code FTCsoftware.
    • Follow the instructions that appear on the web page to download and install the LabVIEW for FTC Toolkit for the operating system you are using.
    • After installation, enable any virus detection programs you disabled.
    Updating the NXT Brick Firmware
    You must download version 1.31 of the NXT brick firmware to your NXT brick to compete in the FTC competition. The field control system (FCS) at the FTC competition cannot communicate with your robot unless you use version 1.31 of the firmware on the NXT brick. The LabVIEW for FTC Toolkit provides the correct version of the firmware.
    To update the firmware in LabVIEW, select Tools»NXT Terminal to open the NXT Terminal dialog box, and click Update Firmware. Make sure that LEGO MINDSTORMS NXT Firmware V1.31 is selected and click Update.
    Features and Changes
    The LabVIEW for FTC Toolkit includes the following features and changes:
    • The LabVIEW for FTC Toolkit supports the Samantha Wi-Fi Module, which the FTC 2011-2012 competition requires all users to connect to. Refer to the FIRST website to install and set up your wireless connection with the Samantha Wi-Fi Module.
    • The FTC Tools VIs palette contains nine VIs that are either new or altered from previous versions of the LabVIEW for FTC Toolkit. In the LabVIEW NXT Module Help, refer to the VI & Function Reference»FTC Tools VIs topic for more information about each new or changed FTC Tools VI.
    • The Remote Control Editor contains a Generate Code button, which creates LabVIEW code based on the configurations you set for one or two game controllers. You can modify this base LabVIEW code as necessary for your specific robot.
    • The Run Program page of the Remote Control Editor contains two modes for testing the game controller configurations: Prototype and FTC Game. Prototype mode allows you to test the configurations using the game controller. FTC Game mode allows you to test the configurations with programs that you can download to the NXT brick or programs that already exist on the NXT brick so you can use the game controller as you would in an FTC match. The Enable and Disable buttons allow you to switch between Teleop mode and Autonomous mode respectively.
    Known Issues
    You can access known issues about the LabVIEW for FTC Toolkit by visiting the National Instruments website at ni.com/first.
    Finding Examples
    Refer to the FTC Arm & Gripper template project for examples of autonomous and teleop programs in the LabVIEW for FTC Toolkit. Select File»New and under Robot Project, select FTC Arm & Gripper to access the FTC Arm & Gripper project. Modify the project to fit an application for your robot.
    Accessing the Help
    Refer to the following resources for more information about the LabVIEW for FTC Toolkit:
    • TETRIX Robotics website—Use the TETRIX Robotics website to access the TETRIX Getting Started Guide, the FTC Extension, and the TETRIX Mastery LabVIEW Tutorials to familiarize yourself with building and programming an FTC robot that moves according to commands you send from a game controller.
    • LabVIEW FTC Tools VIs Help—Use the LabVIEW FTC Tools VIs Help to access reference information about the FTC Tools VIs. (Windows) Select Help»NXT Module Help to display the LabVIEW NXT Module Help, click the Contents tab if necessary, and then navigate to the VI & Function Reference»FTC Tools VIs topic. (Mac OS X) Select Help»FTC Tools Help to display the LabVIEW FTC Tools VIs Help. You also can right-click an FTC VI on the block diagram and select Help from the shortcut menu.

    Important Information
    Copyright
    © 2011 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    Trademarks
    LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-6-20 07:52

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表