石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 596|回复: 0

[LV工具模块] LabVIEW 2013 Wireless Sensor Network Module Pioneer Win32Eng LabVIEW无线传感器网络模块开发者2013

[复制链接]
  • TA的每日心情
    郁闷
    昨天 07:37
  • 签到天数: 3218 天

    连续签到: 88 天

    [LV.Master]2000FPS

     楼主| 发表于 2022-12-5 15:38:39 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    LabVIEW 2013 Wireless Sensor Network Module Pioneer Win32Eng LabVIEW无线传感器网络模块开发者2013

    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    发布日期:2013/9/10
    包含的版本:2013
    受支持的操作系统
    Windows 7 (32-bit and 64-bit)
    Windows Vista with Service Pack 1.0 (32-bit)
    Windows XP with Service Pack 3 (32-bit)
    Windows Server 2003 R2 (32-bit)
    语言:English
    应用程序位数:32位
    校验和:
    文件大小: 921219872 字节 (878.54 MB)
    修改日期: 2022-03-25 06:04
    MD5: 5cedab1b0be09c68139962a974265d87(秒传)
    SHA1: 601b32488c6b0badf9ecf16153dc9466dcd4e9f8
    SHA256: 1cc73aef163ab2b838f83a164f2b4bf908fa3704f3898cfdc7c185094fa66f49
    CRC32: f4e402d3

    百度网盘和NI官方下载地址:
    请注册登录视觉论坛账号,购买附件查看下载地址
    LVWSN2013.txt (543 Bytes, 下载次数: 0, 售价: 10 元)

    LabVIEW 2013 Wireless Sensor Network Module Pioneer Readme
    Version 13.0.0
    November 2013
    This file contains important information about the Wireless Sensor Network Module, including installation instructions and known issues.
    System Requirements
    Installation Instructions
    Product Security and Critical Updates
    Known Issues
    Accessing the Help
    Finding Examples
    Automating the Installation of NI Products
    How to Use NI Software with Microsoft Windows 8.x
    NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
    Legal Information

    System Requirements
    In addition to the system requirements for the LabVIEW Development System, the Wireless Sensor Network Module has the following requirements:
    • LabVIEW 2013 Base, Full, or Professional Development System (32-bit)
    • At least 2.5 GB of disk space
    • NI WSN-9791 Ethernet Gateway, NI 9792 WSN Real-Time Gateway, or an NI CompactRIO system with an NI 9795 C Series WSN Gateway
    • NI WSN-32xx WSN Nodes
    Refer to the LabVIEW readme for additional system requirements and supported operating systems for LabVIEW 2013.
    Installation Instructions
    Complete the following steps to install the Wireless Sensor Network Module.
    • Log in as an administrator or as a user with administrator privileges.
    • Install LabVIEW using the LabVIEW 2013 Platform DVDs, if not already installed. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.

      To request additional LabVIEW Platform DVDs, refer to the National Instruments website at ni.com.
    • Insert the NI LabVIEW Wireless Sensor Network Module media. If the installer does not automatically begin, double-click autorun.exe on the media to begin installation.
    • Select Install LabVIEW Wireless Sensor Network Module.
    • Follow the instructions on the screen for installing the Wireless Sensor Network Module.
    • Activate the Wireless Sensor Network Module.

      You must activate the Wireless Sensor Network Module before you can build VIs into WSN applications. The Wireless Sensor Network Module runs in evaluation mode if you do not activate it. You also can use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager or from NI Launcher in Windows 8, to activate National Instruments products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the National Instruments License Manager, for more information about activating NI products.
    • Install and configure the NI Wireless Sensor Network devices. Refer to the NI Wireless Sensor Network Devices Getting Started Guide manual for installation instructions.
    Product Security and Critical Updates
    Visit ni.com/security for security information about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    Known Issues
    You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Wireless Sensor Network Module.
    Accessing the Help
    Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Wireless Sensor Network Module.
    Finding Examples
    Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Wireless Sensor Network Module are located in the labview\examples\lvemb\wsn directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
    How to Use NI Software with Microsoft Windows 8.x
    When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
    Using NI Launcher
    NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
    Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
    Pinning Frequently Used Applications
    For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
    Current ApplicationIcon LocationPin to Action
    Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
    Windows 8.xDesktopStart screenRight-click application and select Pin to Start
    Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
    Finding All Programs
    If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).
    For more information about NI support for Windows 8.x, visit ni.com/windows8.
    NI LabVIEW Wireless Sensor Network Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
    National Instruments LabVIEW Wireless Sensor Network Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the Wireless Sensor Network Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
    ProductInfo Code
    NI LabVIEWlifecycle
    NI LabWindows™/CVI™cvi_lifecycle
    NI Measurement Studiomstudiolifecycle
    NI TestStandtslcp
    NI DIAdemddlcp
    NI SignalExpressselcp
    NI VeriStandnivslifecycle

    Legal Information
    Copyright
    © 2009–2013 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-5-31 05:42

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表