石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 545|回复: 0

[LV工具模块] LabVIEW 8.2 System Identification Toolkit 3.0.1 Win32Eng LabVIEW8.2系统辨识工具包3.0.1版下载

[复制链接]
  • TA的每日心情
    无聊
    5 小时前
  • 签到天数: 3262 天

    连续签到: 132 天

    [LV.Master]2000FPS

     楼主| 发表于 2023-5-9 14:49:42 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    LabVIEW 8.2 System Identification Toolkit 3.0.1 Win32Eng LabVIEW8.2系统辨识工具包3.0.1版下载

    System Identification(系统识别)工具包可用于为现实设备建立数学模型。 该工具包中包含数据预处理、模型估计、分析和验证工具。 通过选择参数、非参数、递归、部分已知等模型估计方法,可识别表述现实设备特性的系统模型。 将识别出的系统模型与Control Design and Simulation模块以及Real-Time模块整合在一起,可完成控制设计的整个过程。

    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    LabVIEW 8.2 System Identification Toolkit 3.0.1
    文件名: LabVIEW 8.2 System Identification Toolkit 3.0.1.zip
    文件大小: 307461512 字节 (293.22 MB)
    修改日期: 2023-05-09 11:36
    MD5: 495a2d0f75e5cdb0da6da418630e95f6
    SHA1: ae377f41f48721d64a99dfcf6da878c6c8bf9bde
    SHA256: 78778d3921313dc778c593aad3ec9680051bb5a70f0e23befc729177ae609a47
    CRC32: 19413837

    百度网盘下载地址:
    请注册登录机器视觉论坛账号,购买附件查看下载地址
    System Identification3.0.1.txt (471 Bytes, 下载次数: 0, 售价: 10 元)

    LabVIEW System Identification Toolkit 3.0.1 Readme
    February 2007
    The LabVIEW System Identification Toolkit 3.0.1 updates the System Identification Toolkit 3.0 to address installation issues with Windows Vista. If you already have installed the System Identification Toolkit 3.0, you first must uninstall that version before installing the System Identification Toolkit 3.0.1.
    Known Issues
    • The System Identification Toolkit 3.0.1 installer does not install this readme file to the labview\readme directory. The installer installs the System Identification Toolkit 3.0 readme file instead.
    • If you are using Internet Explorer 7 on Windows Vista, clicking an external link in the LabVIEW Help might display a JavaScript error while displaying the linked page. An external link is a link to a Web site or other place outside the LabVIEW Help. You can ignore this JavaScript error because the script has run already and the page displays properly. If Internet Explorer prompts you to continue running scripts, click the Yes button to close the dialog box and continue.
    • Because the default fonts on Windows Vista are different than the default fonts on previous versions of Windows, you might notice cosmetic issues, such as overlapping or truncated text strings, in VIs and LabVIEW dialog boxes. To correct this problem, change the theme of the operating system to Windows Classic in the Theme Settings dialog box and then restart LabVIEW. Select Start»Control Panel»Appearance and Personalization and click Change the theme to display the Theme Settings dialog box.

    LabVIEW System Identification Toolkit 3.0 Readme
    August 2006
    This file contains information to introduce you to the LabVIEW System Identification Toolkit 3.0. This file also provides you with help resources you can use while working with the toolkit. The file contains the following information:
    Overview
    System Requirements
    Installation Instructions
    Accessing the Help
    Finding Examples
    System Identification Toolkit 3.0 Changes
    Known Issues

    Overview
    The System Identification Toolkit provides two tools, an assistant and a library of VIs, for developing models of a system based on a large set of raw data. Both tools enable you to complete the entire system identification process, from analyzing the raw data to validating the identified model.
    Without prior knowledge about programming in LabVIEW, you can use the LabVIEW System Identification Assistant to identify and validate linear time-invariant models of systems from empirical data. You can load or acquire raw data into the System Identification Assistant, preprocess the data, estimate a model that describes the system, and then validate the accuracy of the model. The System Identification Assistant has windows in which you can immediately see the raw data, the response data, the estimated model, the validation results, and the mathematical equations that describe the model.
    The System Identification Toolkit also provides VIs that you can use to preprocess raw data from a dynamic system, build a mathematical model that reflects the behavior of that system, and validate the identified model. The System Identification VIs enable you to customize a LabVIEW block diagram to achieve specific goals. You also can use other LabVIEW VIs and functions to enhance the functionality of the application. Unlike creating a project with the System Identification Assistant, creating a LabVIEW application using these VIs requires basic knowledge about programming in LabVIEW.
    System Requirements
    To use the System Identification VIs, you must be a properly licensed user of and have the following software installed and activated on the host computer.
    • LabVIEW 8.2, Full or Professional Development Systems
    You can install the System Identification Assistant without installing LabVIEW 8.2 on the host computer. However, to convert projects created with the System Identification Assistant into LabVIEW block diagrams, you must have LabVIEW 8.2 installed on the host computer.
    Installation Instructions
    Complete the following steps to install the System Identification Toolkit.
    • Insert the System Identification Toolkit CD.
    • Run the setup.exe program.
    • Follow the instructions that appear on the screen.
    Accessing the Help
    Refer to the LabVIEW Help, accessible by selecting Help»Search the LabVIEW Help from the pull-down menu in LabVIEW, for information about the System Identification VIs.
    Refer to the LabVIEW System Identification Toolkit User Manual for conceptual information about using the System Identification Toolkit. Open this manual by selecting Start»Programs»National Instruments»LabVIEW 8.2»LabVIEW Manuals and opening SI_User_Manual.pdf or by navigating to the labview\manuals directory and opening SI_User_Manual.pdf.
    Refer to the LabVIEW System Identification Toolkit Algorithm References manual for information about algorithms implemented in the System Identification Toolkit and their corresponding references. The LabVIEW System Identification Toolkit Algorithm References manual (SIreference.pdf) is located in the labview\manuals directory.
    Refer to the NI Express Workbench Help, accessible by selecting Help»Express Workbench Help from the pull-down menu in the NI Express Workbench, for information about the System Identification Assistant. The NI Express Workbench Help includes reference information about the System Identification steps and a tutorial that helps you familiarize yourself with the System Identification Assistant.
    Finding Examples
    You can access the examples for the System Identification Toolkit by selecting Help»Find Examples to display the NI Example Finder and then navigating to the Toolkits and Modules»System Identification folder. You also can click the Find Examples link in the Examples section of the Getting Started window to display the NI Example Finder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
    You also can find the examples for the System Identification Toolkit in the labview\examples\System Identification directory.
    Example projects for the System Identification Assistant are located in the National Instruments\ExpressWorkbench\System Identification Assistant\Examples folder.
    Refer to the National Instruments Web site at ni.com/info and enter the info code exfmsi for more examples of using the System Identification Toolkit.
    System Identification Toolkit 3.0 Changes
    • In the System Identification Toolkit 2.0 and earlier, the Zero-Pole-Gain instance of the SI Get Coefficients from System Model VI returns the static gain of the model. In the System Identification Toolkit 3.0, the Zero-Pole-Gain instance of the SI Get Coefficients from System Model VI returns the transfer function gain of the model instead.
    • The System Identification Toolkit 3.0 refers to pole-zero models as zero-pole-gain models.
    • In the System Identification Toolkit 2.0 and earlier, you launch the System Identification Assistant by selecting Start»Programs»National Instruments»System Identification Assistant»System Identification Assistant. To launch the System Identification Assistant from LabVIEW, select Tools»System Identification Toolkit»Launch System Identification Assistant.

      In the System Identification Toolkit 3.0, you launch the System Identification Assistant by selecting Start»Programs»National Instruments»Control Design and Simulation»System Identification Assistant. To launch the System Identification Assistant from LabVIEW, select Tools»Control Design and Simulation»Launch System Identification Assistant.
    Known Issues
    Some of the example projects for the System Identification Assistant contain a User-Defined Step, which relies on data that is unavailable until you run the project once. Some of the steps in the projects display errors until you manually run these example projects once.

    Copyright
    © 2006–2007 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    Trademarks
    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-7-13 15:25

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表