注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 19.5 Win32/64Eng 视觉采集软件VAS1950版 适用LabVIEW2019SP1
NI Vision Acquistion Software 19.5 VAS2019SP1视觉采集软件，NI相机驱动程序IMAQdx，32位与64位英文版本，Windows系统。与LabVIEW2019SP1同时期发布，支持LabVIEW2019SP1、VDM2019SP1、VBAI2019等软件版本。可选择离线安装版本下载。
2019年9月发布，版本19.5
支持操作系统：
Windows 10 (32- &64-bit)
Windows 10 IoT Enterprise LTSB 2016 (64-bit)
Windows 8.1 (32- & 64-bit)
Windows 7 SP1 (32- & 64-bit)
Windows Embedded Stａｎｄard 7 SP1 (32- &64-bit)
Windows Server 2012 R2 (64-bit)
Windows Server 2008 R2 SP1 (64-bit)
即要求最低WIN7SP1，对于WIN7、WIN VISTA、WIN XP已经不再支持。
支持的LabVIEW/NXG/VBAI/LabWindows/CVI版本：
NI Application Software | Versions Supported by NI Vision Acquisition Software | | NI LabVIEW | 2016, 2017, 2018, 2019 | | NI LabVIEW Real-Time Module | 2016, 2017, 2018, 2019 | | NI LabVIEW FPGA Module | 2016, 2017, 2018, 2019 | | NI LabVIEW NXG | 4.0 | | NI LabWindows™/CVI™ | 2013, 2015, 2017, 2019 | | NI Vision Development Module | 7.1 later | | NI Vision Builder for Automated Inspection | 2.5 later |
LabVIEW2015SP1及以前版本不再支持
NI Vision Acquistion Software 19.5 VAS2019SP1视觉采集软件NI在线安装文件地址（NI官方推荐方式）：
NI官方网站下载地址：
请登录论坛账号后购买附件下载查看
百度云盘下载NI在线安装工具PM地址：
修正版链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请登录论坛账号后购买附件下载查看
未修正链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码:请登录论坛账号后购买附件下载查看
NI Vision Acquistion Software 19.5 VAS2019SP1视觉采集软件离线ISO下载地址：
离线版校验和：
文件大小: 3481692160 字节 (3.24 GB)
修改日期: 2019-11-16 12:55
MD5: 8ad8cfcf54168f2f75fcd95d8a5d2708（官方正确）
SHA1: c79bac6b1fc2e3b3a965fec446ad5acf860b6d7d
SHA256: 670b6887345b35ecb8c9576bed0c4299fdac47b8b60b0d6cfaf77d4ce0bf7f35
CRC32: 2bc8673a
百度网盘和NI官方下载地址：
请注册视觉论坛会员登录后购买附件下载查看
VAS19.5.txt
(1.04 KB, 下载次数: 103, 售价: 10 元)
NI Vision Acquisition Software 19.5 ReadmeOctober 2019 This file contains important information about National Instruments Vision Acquisition Software, including installation instructions, new features, fixed issues, and known issues. Overview
System Requirements
Product Security and Critical Updates
NI Application Software Support
Vision Standards Support
New Features
Updates and Improvements
Known Issues
Installation Instructions
Configuring NI-IMAQ
Configuring NI-IMAQdx
Automating the Installation of NI Products
Documentation and Examples
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Vision Acquisition Software Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
LabVIEW NXG Considerations
Legal Information OverviewNI Vision Acquisition Software (VAS) allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware. For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Acquisition Software. NI Vision Acquisition Software includes the following drivers: - NI-IMAQ is driver software for Camera Link cameras.
- NI-IMAQdx is driver software for the following device types:
- Camera Link cameras in Windows using supported frame grabbers:
- PCIe-1427
- PCIe-1433
- PCIe-1437
- PXIe-1435
- ISC-178x smart cameras
- GigE Vision-compliant cameras
- USB3 Vision-compliant cameras
- IIDC/DCAM-compliant IEEE 1394 cameras in Windows
- DirectShow-compatible cameras
- NI-IMAQ I/O Driver Software that helps you program reconfigurable frame grabbers with LabVIEW FPGA and helps you program DIO without LabVIEW FPGA for Compact Vision Systems, Industrial Controllers, and other PCIe-based devices using the Vision RIO API.
- Reconfigurable Frame Grabbers (requires LabVIEW FPGA):
- PCIe-1473
- PCIe-1477
- NI 1483 FlexRIO Adapter Module
- Devices supporting the Vision RIO API:
- CVS-1458
- CVS-1458RT
- CVS-1459
- CVS-1459RT
- IC-3120
- IC-3121
- IC-3171
- IC-3172
- IC-3173
- PCIe-8254
- PCIe-8255
- PCIe-8237
- Note: LabVIEW FPGA can optionally be used to reconfigure the FPGA on Vision RIO devices, but only DIO functions are available for external connections.
- Note: New versions of Vision Acquisition Software no longer support the following hardware:
- NI 17xx and NI 177x Smart Cameras
- NI EVS-1463, -1463RT, -1464, and -1464RT Embedded Vision Systems
- NI CVS-1454, -1455, -1456, and -1457RT Compact Vision Systems
- Analog cameras
- Parallel digital cameras
- Basler and Axis IP cameras
- Note: New versions of Vision Acquisition Software no longer support the following real-time operating systems:
- VxWorks
- Phar Lap ETS (with the exception of GigE Vision-compliant cameras on PXI systems via the NI-IMAQdx driver)
Additional Driver SoftwareSome hardware requires driver software in addition to Vision Acquisition Software drivers. Refer to the National Instruments website at ni.com/drivers for information about these drivers. - The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.
- The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
- The IC-312x and IC-317x industrial controllers require NI Industrial Controller Device Drivers to access FPGA resources and to discover remote real-time targets in NI Meaurement & Automation Explorer (MAX).
System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software: | Processor | Pentium 4 1 GHz or equivalent | | Memory | 512 MB RAM | | Display | 1,024 × 768 resolution video adapter with a 16-bit display | Minimum Recommended
Free Hard Disk Space | NI Vision Acquisition Software | 4.8 GB | NI-IMAQ | 3.1 GB | NI-IMAQdx | 4.1 GB | NI-IMAQ I/O | 3.7 GB | | Operating System | - Windows 10 (32- and 64-bit)
- Windows 10 IoT Enterprise LTSB 2016 (64-bit)3
- Windows 8.1 (32- and 64-bit)1
- Windows 7 SP1 (32- and 64-bit)2
- Windows Embedded Standard 7 SP1 (32- and 64-bit)2,3
- Windows Server 2012 R2 (64-bit)1
- Windows Server 2008 R2 SP1 (64-bit)2
|
Note NI Vision Acquisition Software August 2016 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Vision Acquisition Software August 2016 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Vision Acquisition Software August 2016 or later to an unsupported OS. Additionally, after installing NI Vision Acquisition Software August 2016 or later, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS. For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?. Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/r/PAESupport. 1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates. 2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. 3Only supported as pre-installed on NI hardware. Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI. NI Application Software SupportThe following table lists the NI application software versions, including service packs, supported by NI Vision Acquisition Software. The installer specifically allows side-by-side installations of NI Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use NI Vision Acquisition Software with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Vision Acquisition Software. | NI Application Software | Versions Supported by NI Vision Acquisition Software | | NI LabVIEW | 2016, 2017, 2018, 2019 | | NI LabVIEW Real-Time Module | 2016, 2017, 2018, 2019 | | NI LabVIEW FPGA Module | 2016, 2017, 2018, 2019 | | NI LabVIEW NXG | 4.0 | | NI LabWindows™/CVI™ | 2013, 2015, 2017, 20191 | | NI Vision Development Module | 7.1 or later | | NI Vision Builder for Automated Inspection | 2.5 or later |
1 NI-IMAQ I/O is not supported in NI LabWindows™/CVI™. NI Vision Acquisition Software .NET SupportNI Vision Acquisition Software February 2014 was the last version to release updated support for the .NET Framework 2.0, .NET Framework 3.5, and .NET language integration into Visual Studio 2005 and Visual Studio 2008. Visual Studio 2010 and later are not supported. Development and runtime support for .NET driver features are no longer included as of NI Vision Acquisition Software 19.0 and later Vision Standards SupportThe following table lists the machine vision and imaging standards supported by NI Vision Acquisition Software. | Machine Vision or Imaging Standard | Version Supported by NI Vision Acquisition Software | | Camera Link® | 2.1 | | GenICam™ | 3.1 | | GigE Vision® | 2.0 (select features) | | IIDC | 1.32 | | USB3 Vision® | 1.0.1 |
New FeaturesThis release of NI Vision Acquisition Software includes the following new features. NI-IMAQ 19.5 - Added support for LabVIEW 2019 SP1
NI-IMAQdx 19.5 - Added support for LabVIEW 2019 SP1
- Added support for LabVIEW NXG 4.0
- For information about VAS support in LabVIEW NXG, visit ni.com/info and enter the Info Code VisionNXGGuide.
NI-IMAQ I/O 19.5 - Added support for LabVIEW 2019 SP1
Updates and ImprovementsRefer to the National Instruments Website for an up-to-date list of all bug fixes in this release. Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI Vision Acquisition Software. The following list contains potential high severity issues that you may want to review before using this product. Refer to the previous link to determine if any known issues have been resolved in a subsequent update. - Installing or reinstalling certain drivers, including NI-IMAQdx or Vision RIO support, on top of previous installations on a Linux Real-Time target can put the target in an unreachable state unless you force it into safe mode using the reset button or manually reassociate driver dependencies on the target. To avoid this issue, format the target prior to installing or reinstalling software, or only perform reinstallations using a Recommended Software Set. To learn more about this issue and additional recovery options, visit ni.com/info and enter the Info Code nikalEmbeddedReinstall.
Installation InstructionsComplete the following steps to install NI Vision Acquisition Software. Note: You must have administrator access to install NI Vision Acquisition Software. - Insert the NI Vision Acquisition Software installation media.
- If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
- Follow the onscreen instructions.
NI-IMAQ and NI-IMAQdx integrate with NI Measurement & Automation Explorer (MAX), the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Vision Acquisition Software. Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product. Configuring NI-IMAQComplete the following steps to install an image acquisition device and configure NI-IMAQ. Note: You must install NI-IMAQ before installing your image acquisition device. Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged. - Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
- Run NI MAX.
- Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
- Expand Devices and Interfaces to display a list of the image acquisition devices installed on your computer.
- Select a camera file, and acquire an image.
- Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
- Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
- To change the camera settings, modify the parameters at the bottom of the image viewer panel.
- You can acquire an image in the following ways:
- Use the Snap button to acquire and display a single image with the image acquisition device.
- Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com. Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with NI MAX. Configuring a Remote PXI/Compact PCIe Image Acquisition DeviceBeginning with Vision Acquisition Software 19.0, NI-IMAQ Real-Time is not included for installation. However, you can still interact with remote real-time targets that have been set up using previous versions of NI-IMAQ and are running currently supported versions of LabVIEW Real-Time. Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the NI MAX help window to install software. Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices. - Launch NI MAX.
- In the Configuration tree, expand Remote Systems.
- Expand the appropriate system.
- Expand Devices and Interfaces.
- Expand NI-IMAQ Devices.
- Expand the device you want to configure.
Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the NI MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ. Configuring NI-IMAQdxComplete the following steps to configure NI-IMAQdx. If you are using a USB webcam or other DirectShow-compatible camera, ensure that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation. Instructions for configuring an IEEE 1394, USB3 Vision, GigE Vision, or IP camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx. Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps. - Install the NIC.
- Right-click the NIC in the Device Manager, and select Update Driver.
- Choose Browse my computer for driver software.
- Browse to the driver location. The newest driver version is installed to \NI-IMAQdx\Staging\NI GigE Vision.
- Click Next.
- Click Close.
Installing the Universal GigE Vision DriverNI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps. Configuring NI-IMAQdx for WindowsComplete the following steps to configure NI-IMAQdx for Windows. - Connect the camera.
- Run NI MAX.
- Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
- Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
- For IEEE 1394 and USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
- Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window. Configuring NI-IMAQdx for the LabVIEW Real-Time ModuleIf you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Documentation and ExamplesDocumentation and examples are installed onto your hard drive with NI Vision Acquisition Software. To view the documentation, select Start»All Programs»National Instruments»Vision»Documentation and then select the driver documentation. Some application-specific documents are installed to the application help folder, as listed in the following sections. Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation. NI Vision Acquisition Software Documentation for NI MAX- You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to \MAX\Help.
NI Vision Acquisition Software Documentation for LabVIEW- You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.
- NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to is the location LabVIEW is installed.
NI Vision Acquisition Software Documentation for LabWindows/CVI- NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.
- NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.
- Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and \CVI\Bin.
- Example programs are installed to
NI Vision Acquisition Software for Eclipse and other Text-based Development Environments- Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to \Vision\Help.
- To view text-based example programs, select Start»All Programs»National Instruments»Vision»Examples, and then select the driver you want to see examples for. You can also navigate to \Public\Public Documents\National Instruments.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10. Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8. LabVIEW NXG ConsiderationsFor information about VAS support in LabVIEW NXG, visit ni.com/info and enter the Info Code VisionNXGGuide. In LabVIEW NXG, NI-IMAQdx supports only the following: - Camera Link cameras used with supported frame grabbers
- GigE Vision-compliant cameras
- USB3 Vision-compliant cameras
- IIDC/DCAM-compliant IEEE 1394 cameras (not available in the measurement panels or SystemDesigner)
- DirectShow-compatible cameras
For advanced camera configuration or renaming support, use NI MAX. Installing NI-IMAQdx for LabVIEW NXGLabVIEW NXG is installed using NI Package Manager. Complete the following steps to install NI-IMAQdx for LabVIEW NXG. - Visit ni.com/info and enter the Info Code NXGDownload to access the LabVIEW NXG download page.
- Click Download LabVIEW NXG.
- NI Package Manager installs, then automatically opens an installation window.
- Select LabVIEW NXG 4.0 and NI-IMAQdx 19.5.
- Complete the installer instructions to download LabVIEW NXG and NI-IMAQdx support for LabVIEW NXG.
NI Vision Acquisition Software Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021NI Vision Acquisition Software will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes: | Product | Info Code | | LabVIEW | lifecycle | | LabWindows/CVI | cvi_lifecycle | | Measurement Studio | mstudiolifecycle | | TestStand | tslcp | | DIAdem | ddlcp | | SignalExpress | selcp | | VeriStand | nivslifecycle |
Legal InformationCopyright © 2019 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies. IVI Foundation Copyright Notice Content from the IVI specifications reproduced with permission from the IVI Foundation. The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents. 375130M-01
| 
发表于 2019-11-25 14:55:16
发表于 2020-2-15 16:54:33
