石鑫华视觉论坛

 找回密码
 注册会员
查看: 2460|回复: 0

[NI软件产品] LabVIEW 2013 FPGA Module Xilinx Compilation Tools Linux32Eng LV2013 FPGA编译工具(ISE 14.4)

[复制链接]
  • TA的每日心情
    奋斗
    9 小时前
  • 签到天数: 3386 天

    连续签到: 8 天

    [LV.Master]2000FPS

    发表于 2020-8-26 21:29:14 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    LabVIEW 2013 FPGA Module Xilinx Compilation Tools  Linux32Eng LV2013 FPGA编译工具(ISE 14.4)

    LabVIEW FPGA编译工具可用于本地或远程编译LabVIEW FPGA代码,并在NI FPGA硬件终端上运行。
    LabVIEW FPGA编译工具是一个实用软件,其中包含的工具可帮助您在本地或远程编译LabVIEW FPGA代码,从而在Xilinx ISE或Xilinx Vivado支持的NI FPGA硬件目标上运行代码。所提供的工具与LabVIEW FPGA模块兼容。

    2013LinuxCW14,4.18GB,官方虽然说是2013SP1版,但是看内容与文件名称,都是2013版,未找到2013SP1版。

    发布日期
    13-8-5
    受支持的操作系统
    Red Hat Enterprise Linux 6.3 (32-bit)
    Red Hat Enterprise Linux 6.3
    语言
    English
    校验和
    MD5: d7e9d840884292aef8e1119dc0a8634f
    SHA1: bfaf752f0b5c3631f178b41c7660276c30f32f61
    SHA256: 14d6ea0ba0255ab21632b9bc2e741eb09bee8cee59f9cb0bf9a2e262ebfc6edf
    CRC32: b0f6cfb0

    百度网盘下载(限速,请开会员或使用工具下载):
    请注册视觉论坛会员,登录购买附件查看,充值请联系在线客服

    NI官方下载地址(可能无法下载完成或地址无效):
    请注册视觉论坛会员,登录购买附件查看,充值请联系在线客服
    FPGACT-Linux-ISE14.4-LV2013SP1.txt (259 Bytes, 下载次数: 4, 售价: 10 元)

    Compile Worker for Linux Readme (LabVIEW FPGA Module)
    Version 13.0.0

    June 2013

    This file contains important information about the LabVIEW FPGA Module Compile Worker for Linux.

    Installation
    You can install the Compile Worker for Linux using the LabVIEW FPGA Module Addtional Xilinx Compilation Tools DVD. You can find installation instructions for the Compile Worker for Linux along with activation instructions in the following locations:

    • LabVIEW FPGA Module Release and Upgrade Notes, available in your FPGA Module software kit or online at ni.com/manuals.
    • Activation Instructions for National Instruments Software, which are available on the LabVIEW intallation media.
    Known Issues
    You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the FPGA Module.


    Important Information
    Copyright

    © 2003–2013 National Instruments. All rights reserved.

    I.     Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

    II.     Third-Party Copyright Notices

    The Compiler_Worker_Notice.txt file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

    /usr/local/natinst/nifpgacompileworker/doc/

    End-User License Agreements and Third-Party Legal Notices

    For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.

    Trademarks

    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.

    Xilinx® is a registered trademark of Xilinx, Inc.

    Linux® is a registered trademark of Linus Torvalds in the U.S. and other countries.

    Other product and company names mentioned herein are trademarks or trade names of their respective companies.

    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(24.09)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-24 18:34

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表