石鑫华视觉论坛

 找回密码
 注册会员
查看: 2822|回复: 0

[NI软件产品] LabVIEW 2017 FPGA Module Xilinx Compilation Tools Linux32Eng LV2017 FPGA编译工具(Vivado 2015.4)

[复制链接]
  • TA的每日心情
    奋斗
    5 小时前
  • 签到天数: 3413 天

    连续签到: 15 天

    [LV.Master]2000FPS

    发表于 2020-8-26 22:40:03 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    LabVIEW 2017 FPGA Module Xilinx Compilation Tools  Linux32Eng LV2017 FPGA编译工具(Vivado 2015.4)

    LabVIEW FPGA编译工具可用于本地或远程编译LabVIEW FPGA代码,并在NI FPGA硬件终端上运行。
    LabVIEW FPGA编译工具是一个实用软件,其中包含的工具可帮助您在本地或远程编译LabVIEW FPGA代码,从而在Xilinx ISE或Xilinx Vivado支持的NI FPGA硬件目标上运行代码。所提供的工具与LabVIEW FPGA模块兼容。

    2017FPGA-LinuxVivado,4.09GB

    发布日期
    17-5-19
    受支持的操作系统
    Red Hat Enterprise Linux 6.5
    Red Hat Enterprise Linux 7
    CentOS 7
    语言
    English
    校验和
    MD5: a60d93aac43a70b3f838ebab6d43c2a9
    SHA1: 9ff2e54fb760099df30a149cf04c40abcc8c95c0
    SHA256: 880220521754a0692770f26417272217b0c309cacba92827d34e2c60dec33e02
    CRC32: d787b120

    百度网盘下载(限速,请开会员或使用工具下载):
    请注册视觉论坛会员,登录购买附件查看,充值请联系在线客服

    NI官方下载地址(可能无法下载完成或地址无效):
    请注册视觉论坛会员,登录购买附件查看,充值请联系在线客服
    FPGACT-Linux-Vivado2015.4-LV2017.txt (280 Bytes, 下载次数: 1, 售价: 10 元)

    LabVIEW 2017 FPGA Module Xilinx Compilation Tools for Linux Readme
    March 2017

    This file contains important information about the LabVIEW FPGA Module Xilinx
    Compilation Tools for Linux, including system requirements and installation
    instructions.

    Overview
    System Requirements
    Supported Hardware
    Installation Instructions
    Product Security and Critical Updates
    Legal Information

    --------
    Overview
    --------
    The Xilinx compilation tools include tools for Vivado 2015.4 and ISE 14.7,
    which are supported by the LabVIEW FPGA Module. Install these compilation tools
    if you want to compile FPGA VIs on a Linux computer.

    The Xilinx compilation tools also support Windows. Refer to the
    FPGA Module Xilinx Compilation Tools for Windows Readme for more information.

    -------------------
    System Requirements
    -------------------
    The Xilinx Compilation Tool for Vivado 2015.4 has the following system
    requirements:
    One of the following operating systems:
    * Red Hat Enterprise Linux 6.5 (64-bit)
    * Red Hat Enterprise Linux 7.0 (64-bit)
    * CentOS 7.0 (64-bit)
    11 GB of additional disk space

    The Xilinx Compilation Tool for ISE 14.7 has the following system requirements:
    Red Hat Enterprise Linux 6.5 (64-bit)
    11 GB of additional disk space

    ------------------
    Supported Hardware
    ------------------
    The following sections contain the NI hardware supported by the
    FPGA Module Xilinx Compilation Tools on Linux:

    ------------------------------------------
    Xilinx Compilation Tool for Vivado 2015.4
    ------------------------------------------
    Use the Xilinx Compilation Tool for Vivado 2015.4 to
    compile FPGA VIs for the following devices:

    IC-317x
    myRIO-1900, myRIO-1950
    NI 9145, NI 9147, NI 9149
    NI cRIO-903x, NI cRIO-906x
    NI ELVIS RIO Control Module
    NI PCIe-782xR
    NI PXIe-517xR, NI PXIe-5624R, NI PXIe-5840R, NI PXIe-659xR,
    NI PXIe-782xR, NI PXIe-784x, NI PXIe-785x, NI PXIe-786xR,
    NI PXIe-793xR, NI PXIe-797xR, NI PXIe-7902R
    NI sbRIO-9651, NI sbRIO-9607, NI sbRIO-9627, NI sbRIO-9637
    NI USB-784xR, NI USB-785xR
    NI USRP-RIO 294x, NI USRP-RIO 295x
    roboRIO

    -------------------------------------
    Xilinx Compilation Tool for ISE 14.7
    -------------------------------------
    Use the Xilinx Compilation Tool for ISE 14.7
    to compile FPGA VIs for the following devices:

    NI 9144, NI 9146, NI 9148, NI 915x
    NI cRIO-907x, NI cRIO-908x, NI cRIO-911x
    NI PCIe-784xR, NI PCIe-785xR, NI PCIe-1473R
    NI PXI-784xR, NI PXI-785xR, NI PXI-795xR
    NI PXIe-796xR, NI PXIe-564xR
    NI sbRIO-9605, NI sbRIO-9606, NI sbRIO-961x,
    NI sbRIO-962x (excluding NI sbRIO-9627),
    NI sbRIO-963x (excluding NI sbRIO-9637), NI sbRIO-964x

    Visit ni.com/info and enter the Info Code XilinxCompileTools for more
    information about the NI hardware supported by each Xilinx compilation tool.

    -------------------------
    Installation Instructions
    -------------------------
    Complete the following steps to install the
    FPGA Module Xilinx Compilation Tools for Linux:
    1. Log into the system as root.
    2. Use mount to mount the compilation tools installer.
    3. If the media type is DVD, change the current directory to the mount point.
    If the media type is USB, change the current directory to
    mount point/Linux/Vivado2015_4 or mount point/Linux/ISE14_7,
    depending on which tool you want to install.
    4. To run the installation script, enter the following command:
    sh ./INSTALL

    -------------------------------------
    Product Security and Critical Updates
    -------------------------------------
    Visit ni.com/security for security information about NI products.
    Visit ni.com/critical-updates for information about critical updates from NI.

    -----------------
    Legal Information
    -----------------
    ---------
    Copyright
    ---------
    (C) 2012-2017 National Instruments. All rights reserved.

    Under the copyright laws, this publication may not be reproduced or transmitted
    in any form, electronic or mechanical, including photocopying, recording,
    storing in an information retrieval system, or translating, in whole or in
    part, without the prior written consent of National Instruments Corporation.

    National Instruments respects the intellectual property of others, and we ask
    our users to do the same. NI software is protected by copyright and other
    intellectual property laws. Where NI software may be used to reproduce software
    or other materials belonging to others, you may use NI software only to
    reproduce materials that you may reproduce in accordance with the terms of any
    applicable license or other legal restriction.

    -----------------------------
    Third-Party Copyright Notices
    -----------------------------
    The SharpZipLib_Notice.pdf file contains a third-party copyright notice for
    third-party components used by certain FPGA Module features. The following
    directory is the default installation location for the file, but the location
    might vary depending on the configuration of the local computer:

    /usr/local/natinst/nifpgacompileworker/doc

    ---------------------------------------------------------
    End-User License Agreements and Third-Party Legal Notices
    ---------------------------------------------------------
    You can find end-user license agreements (EULAs) and third-party legal notices
    in the following locations after installation:

    /usr/local/natinst/nifpgacompileworker/doc

    ---------------------------------
    U.S. Government Restricted Rights
    ---------------------------------
    If you are an agency, department, or other entity of the United States
    Government ("Government"), the use, duplication, reproduction, release,
    modification, disclosure or transfer of the technical data included in this
    manual is governed by the Restricted Rights provisions under Federal
    Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal
    Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015
    for military agencies.

    -------------------------------
    IVI Foundation Copyright Notice
    -------------------------------
    Content from the IVI specifications reproduced with permission from the IVI
    Foundation.

    The IVI Foundation and its member companies make no warranty of any kind with
    regard to this material, including, but not limited to, the implied warranties
    of merchantability and fitness for a particular purpose. The IVI Foundation and
    its member companies shall not be liable for errors contained herein or for
    incidental or consequential damages in connection with the furnishing,
    performance, or use of this material.

    ----------
    Trademarks
    ----------
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for
    information on National Instruments trademarks. Xilinx® is a registered
    trademark of Xilinx, Inc. Other product and company names mentioned herein
    are trademarks or trade names of their respective companies.

    -------
    Patents
    -------
    For patents covering the National Instruments products/technology, refer to
    the appropriate location: Help» Patents in your software, the patents.txt file
    on your media, or the National Instruments Patent Notice at ni.com/patents.

    374740G-01
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(24.09)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-12-23 13:55

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表