NI-RIO 3.1.1旧版设备驱动Windows系统32位English完整版

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-RIO 3.1.1旧版设备驱动Windows系统32位English完整版

NI-RIO（旧版）
NI-RIO用于为可重配置硬件设备提供支持。
NI-RIO是一个设备驱动，用于支持可重配置I/O (RIO)硬件的识别、编程和部署。它为CompactRIO模块、多功能可重配置I/O设备、PXI多功能可重配置I/O模块和FlexRIO仪器提供了支持。

3.1.1
文件大小: 954131009 字节 (909.93 MB)
修改日期: 2014-08-28 02:27
MD5: 6f996650f7497b06d75d4c160a005590（官方正确）
SHA1: eb873247048447e316503ed9aa0454870eb6ca42
SHA256: aabdeeda60a58a011fc9beb1173038095ffb19ed1bf55c6e070c665b37a1f91a
CRC32: 59cc9c13

NIRIOWin3.1.1.txt (286 Bytes, 下载次数: 0, 售价: 10 元)

2020-10-28 20:28 上传

点击文件名下载附件

NI-RIO 3.1.1 Readme

April 2009

ni.com/support

This file contains important information about NI-RIO 3.1.1, including information on installing NI-RIO 3.1.1, descriptions of known issues for installing and using NI-RIO 3.1.1, and information about the hardware and software supported by NI-RIO 3.1.1.

---

• Installing NI-RIO 3.1.1
• Bug Fixes in NI-RIO 3.1.1
• Known Issues for Using NI-RIO 3.1.1
• Changes in NI-RIO 3.1.1 with LabVIEW 8.6.x
• No Support for LabVIEW 8.0.x
• Supported Platforms
• Supported Hardware and Software
  

---

Installing NI-RIO 3.1.1

Complete the following steps to install NI-RIO 3.1.1 for use with LabVIEW FPGA 8.6.1.

• Install LabVIEW 8.6.1.
• Install LabVIEW Real-Time 8.6.1.
• Install LabVIEW FPGA 8.6.1.
• Install NI-RIO 3.1.1 using the two installation CDs or the NI Driver DVD.
  

Back to Top

---

Bug Fixes in NI-RIO 3.1.1

Refer to the KnowledgeBase at ni.com for a list of bug fixes in this release.

Back to Top

---

Known Issues for using NI-RIO 3.1.1

Refer to the KnowledgeBase at ni.com for a current list of all known issues in this release.

Back to Top

---

Changes in NI-RIO 3.1.1 with LabVIEW 8.6.x

The following things have changed in NI-RIO 3.1.1 with LabVIEW 8.6.x.

• CompactRIO chassis item in Project Explorer tree layout—The CompactRIO chassis item is new in NI-RIO 3.x with LabVIEW 8.6.x. Each CompactRIO controller can be associated with one chassis. In the Project Explorer tree layout, the chassis item can contain I/O modules and/or one FPGA target.
• Each CompactRIO chassis item can contain only one FPGA target item—In previous versions of NI-RIO, projects could contain multiple FPGA targets under one CompactRIO controller item. In NI-RIO 3.x with LabVIEW 8.6.x, each CompactRIO chassis item can contain only one FPGA target item. If you open a project with multiple FPGA target items under a single controller, LabVIEW creates multiple controller items, each with a single chassis item containing one of the FPGA target items from the original project.
• Maximum update rates for NI 9264 in cRIO-9151 have changed—The following table shows the maximum update rates, by number of channels in use, for the NI 9264 in a cRIO-9151 R Series expansion chassis.
  
  

  Number of Channels	Maximum Update Rate
  1	3.7 μs
  2	6.6 μs
  3	9.4 μs
  16	47 μs

  
  
  Refer to the latest version of the NI 9264 Operating Instructions and Specifications on ni.com for more information.
• Maximum update rate for NI 9403 in cRIO-9151 has changed—The maximum update rate for the NI 9403 in a cRIO-9151 R Series expansion chassis is 8 μs. Refer to the latest version of the NI 9403 Operating Instructions and Specifications on ni.com for more information.
  

Back to Top

---

No Support for LabVIEW 8.0.x

NI-RIO 3.1.1 does not support LabVIEW 8.0.x. If you are using LabVIEW 8.0.x, install NI-RIO 2.x.

Back to Top

---

Supported Platforms

NI-RIO 3.1.1 supports the following platforms:

• Windows Vista Business (32-bit and 64-bit versions)
• Windows XP Professional
• Windows 2000 Professional (Service Pack 3 or higher)
  

Back to Top

---

Supported Hardware and Software

Refer to the NI Developer Zone at ni.com for a complete list of the hardware that is supported by this and previous versions of NI-RIO as well as what versions of LabVIEW software are supported by each version of NI-RIO.

For additional FlexRIO product support and information, please refer to ni.com/flexrio.

Back to Top

---

Copyright

© 2006–2009 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.

Back to Top