注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 2010.03 for LabVIEW 2009SP1 Win32/64Eng 视觉采集软件VASMarch2010
VAS2010.03版，应该适用于2009SP1版本，LV2009SP1版本发布于2009年12月，VAS2010.03则发布于次年的三月，而更早一版的VAS是2009.11，略早于2009SP1版本的发布日期。可以尝试VAS2009.11版本，或2010.03版本以测试兼容性，推荐使用VAS2010.03。
美国国家仪器视觉采集软件Vision Acquisition Software November 2010.03，VASMarch2010,VAS2010.03版本，石鑫华视觉珍藏版。
文件大小: 1071877363 字节 (1022.22 MB)
修改日期: 2019-01-03 13:12
MD5: 9cb97b1f4a869e6a973db5951b3c3a62（官方正确）
SHA1: 5ecd9a5aab15ae01a0fe2b7d7eaa17498d175af4
SHA256: af0af4acf52d237a80995a3d6d9ece89d584cd30d6b05ef316d14532181325d6
CRC32: 59cdd14e
百度云盘下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址（可能无效或无法完成下载）：
请购买附件下载查看
VAS2010.03.txt
(238 Bytes, 下载次数: 56, 售价: 10 元)
NI Vision Acquisition Software Release NotesMarch 2010 This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections: New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras Customers
Minimum System Requirements
Software Support
Installation
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware. The readme.html file for each NI Vision Acquisition Software driver is installed to the following default locations, where is the location to which National Instruments software is installed. For a list of known issues, refer to the individual driver readmes. - NI-IMAQ—\NI-IMAQ\Docs\readme.html
- NI-IMAQdx—\NI-IMAQdx\Docs\readme.html
- NI-IMAQ I/O—\NI-IMAQ IO\Docs\readme.html
New FeaturesThis release of Vision Acquisition Software includes the following new features: NI-IMAQ 4.4NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices. - Support for the NI PCIe-1433 high performance Camera Link image acquisition board
- Support for the NI 1483
- Support for power over Camera Link
- Support for selecting camera files located outside of the \Data directory
- Improved support for transferring camera files to a remote target
NI-IMAQdx 3.6NI-IMAQdx is driver software that supports IEEE 1394, GigE Vision, DirectShow-compatible USB, and IP cameras. - GenICam GenApi v. 2.0.1
- Chunk data support for GigE Vision cameras
NI-IMAQ I/O 2.3.1NI-IMAQ I/O is the National Instruments I/O device driver software for controlling the digital I/O on IEEE 1394 hardware.
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras CustomersNI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras.
Minimum System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software: - Pentium 4 1 GHz or equivalent processor
- 512 MB RAM
- Free hard disk space
- NI-IMAQ: 460 MB
- NI-IMAQdx: 360 MB
- 1024 × 768 resolution video adapter and monitor
- Internet Explorer 5.0 or later to view online documentation
Software SupportThis section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software. Operating Systems- Real-Time Module 8.2 or later
- Windows 7/Vista/XP (32-bit)/2000/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.
Note NI Vision Acquisition Software does not support Windows Server non-R2 editions.
| Device | Windows 7 32-bit/Windows Vista 32-bit | Windows 7 64-bit/Windows Vista 64-bit/Server 2008 R2 | | NI 1405 | Yes | Yes* | | NI 1407 | Yes | Yes* | | NI 1408 | No | No | | NI 1409 | Yes | Yes* | | NI 1410 | Yes | Yes* | | NI 1411 | Yes | Yes* | | NI 1422 | Yes | Yes* | | NI 1424 | Yes | Yes* | | NI 1426 | Yes | Yes* | | NI 1427 | Yes | Yes*† | | NI 1428 | Yes | Yes* | | NI 1429 | Yes | Yes*† | | NI 1430 | Yes | Yes*† | | NI 1433 | Yes | Yes*† | | NI 1483 | Yes | Yes* | | NI 8231 | Yes | Yes | | NI 8234 | Yes | Yes | | NI 8235 | Yes | Yes | | NI 8252 | Yes | Yes | | NI 8254R | Yes | Yes | | NI 8255R | Yes | Yes | | * Applications developed using 8.2.1 or later will run on systems with more than 3 GB of physical memory. Applications developed using other development environments, such as Microsoft Visual C, Visual Basic, and .Net, are limited to systems with 3 GB or less of physical memory. All 32-bit applications, including those developed using , may not allocate more than 2 GB of memory total. † A firmware update is available for this device to allow non- applications to run on systems with more than 3 GB of physical memory. To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware. |
Development Environments- 8.2 and later (NI-IMAQ I/O does not support 2009 (64-bit))
- Real-Time Module 8.2 or later
- LabWindows/CVI 8.2 or later
- Microsoft Visual C/C++ 6.0 or later
- Microsoft Visual Basic 6.0 or later
- Microsoft Visual Studio .NET 2005 and later (except NI-IMAQ I/O)
InstallationComplete the following steps to install NI Vision Acquisition Software: Note: You must have administrator access to install the NI Vision Acquisition Software. - Insert the NI Vision Acquisition Software installation DVD in the DVD-ROM drive.
- If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
- Follow the onscreen instructions.
NI-IMAQ and NI-IMAQdx integrate with MAX, the National Instruments utility for configuring and testing your measurement and automation system. The MAX icon appears on your desktop after you install NI Vision Acquisition Software.
Configuring NI-IMAQComplete the following steps to install an image acquisition device and configure NI-IMAQ: Note: You must install NI-IMAQ before installing your image acquisition device. Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged. - Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
- Run MAX.
- Double-click the MAX icon on the desktop. You can use MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
- Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
- Select a camera file, and acquire an image.
- Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
- Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
- To change the camera settings, modify the parameters at the bottom of the image viewer panel.
- You can acquire an image in the following ways:
- Use the Snap button to acquire and display a single image with the image acquisition device.
- Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com. Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with MAX. Configuring a Remote PXI/Compact PCIe Image Acquisition DeviceUse MAX to install NI-IMAQ for Real-Time from the host machine onto the target system. The NI-IMAQ for Real-Time components enable the remote device to acquire and analyze images as directed by the host machine. Note: Install NI-IMAQ and the Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the MAX help window to install software. Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices. - Launch MAX.
- In the Configuration tree, expand Remote Systems.
- Expand the appropriate system.
- Expand Devices and Interfaces.
- Expand NI-IMAQ Devices.
- Expand the device you want to configure.
Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.
Configuring NI-IMAQdxComplete the following steps to install and configure NI-IMAQdx. If you are using a USB camera, ensure that the camera is compatible with DirectShow, and that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation. Instructions for configuring an IEEE 1394 or GigE Vision camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx. Installing IEEE 1394 HardwareInstall your IEEE 1394 interface card. Follow the installation instructions provided by the manufacturer. Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps. Installing the Universal GigE Vision DriverNI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps: Configuring Multiple PortsIf you plan to use multiple ports with NI-IMAQdx, complete the following steps: Configuring NI-IMAQdx for WindowsComplete the following steps to configure NI-IMAQdx for Windows: - Connect the camera.
- Run MAX.
- Double-click the MAX icon on your desktop. You can use MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
- Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
- For IEEE 1394 cameras, NI-IMAQdx may not be associated with the camera. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
- Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window. Configuring NI-IMAQdx for the Real-Time ModuleIf you are using a Windows development machine, the Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx: Note: NI-IMAQdx does not support USB cameras on the Real-Time Module.
Known IsuesNational Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the info code windows7.
DocumentationThe NI Vision Acquisition Software documentation is installed onto your hard drive with NI Vision Acquisition Software. The documentation ships as Adobe Acrobat portable document format (PDF) files and HTML Help files. To view the NI Vision Acquisition Software documentation, select Start»All Programs»National Instruments»Vision»Documentation. Note: You must have Adobe Acrobat Reader with Search and Accessibility 5.0.5 or later installed to view the PDFs. Refer to the Adobe Systems Incorporated Web site at www.adobe.com to download Adobe Reader. NI DocumentationYou can access the NI-IMAQ VI Reference Help and the NI-IMAQdx VI Reference Help from the Help menu. In , select Help»NI Vision for Help. .NET DocumentationThe NI Vision Acquisition Software .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process. The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.
Copyright © 2010 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. Trademarks National Instruments, NI, ni.com, and are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.
| 
发表于 2013-5-8 20:59:53
