LabVIEW 2012 Real-Time Module LV2012实时模块RealTime2012-Eng 32位Windows英文版下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2012 Real-Time Module LV2012实时模块RealTime2012-Eng 32位Windows英文版下载

自2011版实时模块起，NI提供了中文、日文、英语等三个语言版。本视觉论坛仅提供中文和英文版，日文版本本论坛不提供下载。

LabVIEW Real-Time模块可帮助您创建在嵌入式硬件设备上执行的可靠、独立的应用程序。
LabVIEW Real-Time模块是LabVIEW编程环境的一个附加软件，可用于创建和部署用于测试、监测和控制的实时分布式系统应用程序。您可以利用实时操作系统来确保独立系统的可靠性和精确定时。数百个事先编写好的LabVIEW库和硬件API还可以帮助您节省宝贵的开发时间以及实现确定性数据采集。
LabVIEW Real-Time模块为创建可靠独立的嵌入式系统提供了基于图形化编程方法的完整解决方案。 作为LabVIEW开发平台的附加模块，LabVIEW Real-Time模块有助开发和调试图形化应用程序，并将这些程序下载到嵌入式硬件设备（如：CompactRIO、Single-Board RIO、PXI、视觉系统，乃至第三方PC）上执行。

使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。

2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。

3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看

NI官方下载地址（可能无效或无法下载完成）：
下载地址1：
请注册登录视觉论坛会员，购买附件查看
下载地址2：
请注册登录视觉论坛会员，购买附件查看

RT2012E.txt (362 Bytes, 下载次数: 0, 售价: 10 元)

2020-7-1 18:07 上传

点击文件名下载附件
RT2010E

LabVIEW 2012 Real-Time Module Readme

Version 12.0.0

June 2012

This file contains important information about the LabVIEW 2012 Real-Time Module.

Supported Platforms
Installation Instructions
Known Issues
Bug Fixes
Accessing the Help
Finding Examples
Automating the Installation of NI Products

---

Supported Platforms

The Real-Time Module supports the following operating systems for application development:

• Windows 7
• Windows Vista
• Windows XP Pro (Service Pack 3)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note:

• The Real-Time Module is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
• Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). Refer to the National Instruments Web site for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.
• The Real-Time Module does not support the Windows Server non-R2 editions.
  

The Real-Time Module installs the following real-time operating systems (RTOSes). Refer to the specific RT target hardware documentation for information about which RTOS your target uses.

• NI ETS 13.1
• VxWorks 6.3
  

Note:   Each RTOS supports only a subset of LabVIEW features. Refer to the Real-Time Module»Unsupported LabVIEW Features book on the Contents tab of the LabVIEW Help for a list of unsupported LabVIEW features for each RTOS.

Installation Instructions

You can install all of your LabVIEW products, including the LabVIEW Real-Time Module, using the LabVIEW 2012 Platform DVDs. You can find installation and activation instructions for the Real-Time Module in the following locations:

• LabVIEW Real-Time Module Release and Upgrade Notes, which are available in your LabVIEW Real-Time Module software kit or online at ni.com/manuals.
• LabVIEW 2012 Installation Guide, which is available in your LabVIEW software kit.
• LabVIEW 2012 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
  

To request additional LabVIEW 2012 Platform DVDs, refer to the National Instruments Web site.

Note:  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Installing and Using Japanese and Simplified Chinese Languages on an RT Target

After you install the Real-Time Module on your development computer, you can complete the following steps to install and use Japanese and Simplified Chinese languages on an RT target.

• Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer to install the Language Support for Japanese or Language Support for Simplified Chinese software component on the RT target. Refer to the NI Measurement & Automation Explorer Help for information about the LabVIEW Real-Time Software Wizard.
• Open the System Settings tab and select Japanese or Simplified Chinese as the Locale.
  

Note:  You cannot use Japanese or Simplified Chinese characters in directory names or file names on the RT target.

Known Issues

Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2012 Real-Time Module.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in the LabVIEW 2012 Real-Time Module.

ID	Fixed Issue
348124	CF cards bigger then 256 MB are no longer working with cFP 2120 (Pharlap) controllers and LV RT 2010 and 2011
344974	Writing Binary data to IDE drives on 31x0 can lead to write failure in driver, error 6 in LabVIEW
315170	Unable to run packed library VIs interactively if rtDownloadPackedLibraries is enabled and if there are classes in the dependency
312070	StartupDLLs INI token limited to 512 characters and gets truncated on install of all components
311844	RT desktop PC utility format menu items are misleading
305921	Redeploying Dynamic Dispatch Vis in Child Classes Cause Failure to Redeploy
304302	[Waveform] 32bit LV2010 on Windows 64bit: Read from Waveform returns wrong values
297201	Time Critical priority VI shouldn't compile if it contains a Timed Loop
286334	"Set Scan Engine Mode.vi" takes much longer time running on the target than on the host.
232720	Bad time stamp when using Scan From String VI on RT target with null default
177926	Scan from string.vi and Format Date/Time String.vi give incorrect results if run on a cFP-22x0

Accessing the Help

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the LabVIEW 2012 Real-Time Module.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the LabVIEW 2012 Real-Time Module are located in the labview\examples\Real-Time directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

---

Important Information

Copyright

© 2012 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.