NI-DAQmx 9.1 Patch Win32/64中文/德语/日语/法语/英文/韩语 NI-DAQmx9.1补丁下载

石鑫华视觉 · 发表于 2020-11-1 08:54:27

注册登陆后可查看附件和大图，以及购买相关内容

您需要登录才可以下载或查看，没有账号？注册会员

x

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-DAQmx 9.1 Patch Win32/64中文/德语/日语/法语/英文/韩语 NI-DAQmx9.1补丁下载

NI-DAQmx
NI-DAQmx为使用NI数据采集和信号调理设备的客户提供支持。
NI-DAQmx驱动程序可控制数据采集系统的各个方面，包括信号调理、LabVIEW配置到编程，以及底层OS和设备控制。驱动程序提供的测量专用VI、函数、数据类型和分析集成可帮助您轻松创建应用程序，而优化的DMA数据传输和单点I/O则可让您快速进行准确的测量。

9.1 Patch
MD5: 183701adc1b08d19a671cd4abe53f0f4（官方正确）
SHA1: f2620a90afa328899bfa99b5df71b81e9527abdb
SHA256: 944344d3f1390c80cec16037f86585826f4bd2adedef92b5659de94299e660ca
CRC32: b71047ce

NIDAQmxWin9.1.0Patch.txt (266 Bytes, 下载次数: 0, 售价: 1 元)

NI-DAQmx 9.1 Readme

February 2010

Thank you for using NI-DAQmx, version 9.1. The readme contains the following main sections:

New features added in NI-DAQmx 9.1
Fixed issues
NI-DAQmx 7.x and later software
NI-DAQmx considerations
Upgrade considerations
Using NI-DAQmx and Traditional NI-DAQ (Legacy) on the same computer
Software support in NI-DAQmx 9.1
Device support in NI-DAQmx
System requirements

New Features Added in NI-DAQmx 9.1

The following main features were added in NI-DAQmx 9.1:

Support for SC Express devices including the NI PXIe-4300, the NI PXIe-4330, the NI PXIe-4331, and the NI PXIe-4353.
Support for the NI USB-TC01, a one-channel thermocouple device.
Torque, force, and pressure measurements with bridge-based sensors.
Force measurements with IEPE sensors.
TDMS streaming in the DAQ Assistant.
Support for the NI 9207, NI 9208, and NI 9269 C Series devices.
Trigger skew correction when performing reference clock synchronization by locking the trigger to a clock (X Series and SC Express devices).
Support for self-calibration on the NI 9205 and NI 9206.

Fixed Issues

The following issues were fixed in NI-DAQmx 9.1.

CAR ID	Summary
131966	Test panels in Traditional NI-DAQ not usable with certain hardware when NI-DAQmx is installed
170368	NI ENET 9163 does not enumerate again after connection is lost in static IP mode
185781	NI-DAQmx auto start doesn't automatically stop task when reference triggering is enabled
185787	NI PXI 6704 Traditional NI-DAQ error -10461 when NI-DAQmx 9.0.0 is installed
189387	Calling DAQ DLL with callbacks using C API in multiple threads causes DLL to not be able to be loaded
194117	NI USB-6210/6211/6215 doesn't throw error when setting terminal routes to use PFI 4-6 for CI tasks
191661	DAQmx Get Write Space Availble returns incorrect value for X Series
198928	Error 50150 using bridge offset nulling calibration and shunt calibration with multiple NI 9237 devices
197835	DAQmx Generate Counter Pulse Output disables menu
194962	Reference Trigger Type is greyed out in LabVIEW SignalExpress

NI-DAQmx 7.x and Later Software

National Instruments measurement devices are packaged with NI-DAQ driver software, an extensive library of VIs and ANSI C functions you can call from your application software, such as LabVIEW or LabWindows™/CVI™, to program your NI measurement devices. Measurement devices include DAQ devices such as the M Series multifunction I/O (MIO) devices, signal conditioning modules, and switch modules. Driver software has an application programming interface (API ), which is a library of VIs, functions, classes, attributes, and properties for creating applications for your device.

NI-DAQmx Considerations

This section covers known issues and considerations specific to NI-DAQmx.

Aborting Single-Point Reads and Writes in LabVIEW

Single-point reads and writes do not respond to the Abort Execution button in LabVIEW.

Configuring MAX Strain Tasks

MAX strain tasks do not support configuring terminal configurations. By default, the configuration in MAX is differential. For the NI SC-2043-SG, the terminal configuration is NRSE. To avoid configuration issues, use the NI-DAQmx API to create the task.

Counter Behavior of the NI DAQPad-6015/6016 for USB

When performing buffered counter measurements on both ctr0 and ctr1 simultaneously, ctr1 returns duplicate counts. If you do not use ctr0 or if ctr0 performs a software-timed measurement, ctr1 functions properly.

DAQ Assistant Maximum Channel Count

The maximum number of channels you can have in a task created with the DAQ Assistant is 4096 channels.

Exporting DAQ Assistant Settings to XML in NI LabVIEW SignalExpress

Exporting DAQ Assistant project settings to XML in NI LabVIEW SignalExpress is available but not fully supported.

LabVIEW Long Property Names

When importing or exporting .ini files and tab-delimited text, LabVIEW long property names are not supported. Only English LabVIEW short property names, CVI property names, and C++/.NET class.property names are supported.

Microsoft Hotfix for USB DAQ Devices and Windows XP

If you are using NI-DAQmx with a USB DAQ device, National Instruments recommends that you install the Microsoft hotfix reported in Knowledge Base 969238.

.NET Remoting

Accessing objects in the DAQmx .NET class library from a remote application domain with .NET Remoting is not supported in Microsoft Visual Studio .NET 2003.

NI DAQCard-6715 Analog Output

Hardware-timed single-point mode and hardware-timed nonbuffered mode are nonfunctional. Your application is using hardware-timed nonbuffered mode if you have set up a sample clock and a buffer size of 0, or set up a sample clock, but do not begin writing until after you start the task. All other waveform and static analog output modes work as expected.

NI ENET/WLS-9215 Times Out Unexpectedly

On the NI ENET/WLS-9215, an unexpected timeout can occur in continuous tasks using an external or very slow sample clock. The last sample may not be returned until the next sample clock pulse. To avoid the timeout, increase the timeout time (to allow the next sample clock pulse to occur) or acquire an even number of samples.

NI-DAQmx .NET Framework Help Shortcut

A shortcut to the NI-DAQmx .NET Framework 1.1 Help is installed by default at Start»All Programs»National Instruments»NI-DAQ»Text-Based Code Support»NI-DAQmx .NET Framework 1.1 Help, a shortcut to the NI-DAQmx .NET Framework 2.0 Help is installed by default at Start»All Programs»National Instruments»NI-DAQ»Text-Based Code Support»NI-DAQmx .NET Framework 2.0 Help, and a shortcut to the NI-DAQmx .NET Framework 3.5 Help is installed by default at Start»All Programs»National Instruments»NI-DAQ»Text-Based Code Support»NI-DAQmx .NET Framework 3.5 Help. This documentation is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio .NET and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads . If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.

Some Devices Enumerate Twice

Supported CompactRIO devices that fit into the NI USB-9162 carrier enumerate twice in MAX. When a device, such as the NI USB-9421, is first installed, it appears as the NI USB-9162 before appearing as the correct device.

USB Device Removal During a DAQ Operation

If a USB DAQ device is unplugged while a DAQ operation is being performed, unexpected results may occur, including causing the operating system to hang. In these occasional, extreme cases, you must reboot the computer. NI recommends stopping all DAQ operations on a USB device before unplugging the device from the computer.

Using the C++ API from Multiple DLLs in the Same Process

If you use the C++ API from multiple DLLs in the same process, you must access the API from only one DLL at a time. You must stop using the API in one DLL and destroy all API objects before using the API in another DLL.

Microsoft Windows 7/Vista and Visual Studio C++, C#, Visual Basic .NET, and ANSI C Examples

Running certain applications on Microsoft Windows 7/Vista requires administrator privileges, because the application name contains keywords such as setup, update, or install. To avoid this problem, you must add an additional manifest to the application that specifies the privileges required to run the application. Some NI-DAQmx ANSI C, Measurement Studio Visual C++, C#, and Visual Basic .NET examples include these keywords. Therefore, some examples for these application development environments include an additional manifest file that you must embed in the example executable.

In ANSI C, Measurement Studio Visual C++ , C#, and Visual Basic .NET, the manifest file is named [ExampleName].exe.manifest, where [ExampleName] is the NI-provided example name. The steps for embedding an example varies depending on the programming language. Refer to the comments included with affected examples for additional information.

Compiling Visual Studio 2005 examples can generate the following warning: manifest authoring warning 81010002: Unrecognized Element "requestedPrivileges" in namespace "urn:schemas-microsoft-com:asm.v3". For more information, refer to the Microsoft Feedback web page. This warning does not affect example execution and can be ignored. This warning happens because of the version of mt.exe that is shipped with Visual Studio 2005. The mt.exe tool embeds the additional manifest in the example executable.

Important: Performing these steps on Windows XP Service Pack 2 (SP2) may cause your computer to restart when you run the application. Refer to the Microsoft Knowledge Base entry for more information. To avoid a computer restart, build your application using Visual Studio 2005 SP1.

Upgrade Considerations

This section covers changes in NI-DAQmx functionality.

Connecting Real and Simulated Devices

Connecting simulated devices to real devices is no longer supported as of NI-DAQmx 8.7.

DAQmx Is Read or Write Late Obsoleted

The existing DAQmx Is Read or Write Late function/VI has been obsoleted and no longer has any effect. Applications that must check whether they are maintaining real-time behavior have two options. For the strictest checking, use the Wait for Next Sample Clock function/VI. Refer to your API reference help, such as the LabVIEW Help or the NI-DAQmx C Function Reference Help, for more information on this function/VI. To check only whether the application misses any analog input samples, set the Report Missed Samples property to True on the analog input task. In LabVIEW, the Report Missed Samples property is in the Real Time property node. For more details, National Instruments strongly recommends that you read the document referred to by the Wait for Next Sample Clock function/VI.

Duplicate Count Prevention Defaults

As of NI-DAQmx 7.4, the default setting for the duplicate count prevention attribute/property on M Series and TIO-based counters has been changed. This change affects all input counter operations, with the exception of single-point edge counting and position measurements. Duplicate count prevention is now on by default as long as the following conditions are met:

The duplicate count prevention attribute/property has not been explicitly set.
The selected counter timebase source is not set to an internal timebase.
The prescaler attribute/property has not been set.
The counter output event has not been configured.

To learn more, refer to Duplicate Count Prevention in the NI-DAQmx help.

Existing .NET Project Produces Build Errors

If you are using NI-DAQmx with a .NET language, an existing project can produce build errors that read "error CS0011: Referenced class 'className' has base class or interface 'NationalInstruments.ISynchronizeCallbacks' defined in an assembly that is not referenced. You must add a reference to assembly 'NationalInstruments.Common'." To eliminate this error, add a reference to the NationalInstruments.Common assembly to the project. This problem occurs when an existing project was built with NI-DAQmx 7.2 or earlier and is rebuilt with NI-DAQmx 7.3 or later.

Multichannel SCXI Convert Clock Default Rate Change in NI-DAQmx 8.5

Starting in NI-DAQmx 8.5, a delay of 20 μs was added to the fastest possible channel conversion rate on an SCXI chassis connected to a 16-bit or 18-bit E or M Series device. If a sample rate is set fast enough to require a convert clock rate greater than the default rate, warning 200011 is generated, informing the user that the accuracy of the measurement might be compromised. However, since this is a warning, the convert clock used is based on the rate needed by the sample clock set by the user (that is, convert clock = sample clock * number of channels).

For SCXI chassis containing a module with track-and-hold circuitry, 10 μs of padding is now added to the fastest possible conversion rate when connected to a 12-bit E Series device.

These changes ensure the most accurate data is being acquired. However, if the effect on the performance due to this change is too great (such as on an RT system using hardware-timed single point in a control loop), then the convert clock rate attribute can be explicitly set, overriding the default rate.

This change affects only multichannel acquisitions.

In versions prior to NI-DAQmx 8.5, only 10 μs of delay was added to the fastest possible channel conversion rate on an SCXI chassis without a track-and-hold module connected to any DAQ device. In these versions of NI-DAQmx, no warning was generated when the sample rate needed a faster convert clock than was chosen by default. When an SCXI chassis with a track-and-hold module was present, the convert clock rate selected was the fastest possible rate that the DAQ device can handle, up to 333 kHz.

NI PCI-6704 and PXI-6704 Current Output Accuracy

NI-DAQmx 8.3 changes the algorithm used to scale the 20 mA current outputs of the NI 6704 to a method that matches the behavior of Traditional NI-DAQ (Legacy). Previous versions of the NI-DAQmx driver use a second method.

The effect of the change is that when NI-DAQmx programs the 6704 to output current, the actual current level of the 6704 is 10 μA higher with NI-DAQmx 8.3 compared to previous versions of NI-DAQmx. The actual current output with NI-DAQmx 8.3 is the same compared to Traditional NI-DAQ (Legacy) drivers. This change has no effect on the voltage outputs of the 6704.

Because of this change, NI recommends that you externally calibrate NI 6704 devices with NI-DAQmx 8.3 (or later) before using devices with the NI-DAQmx 8.3 (or later) driver. NI 6704 devices that ship with NI-DAQmx 8.3 have already been calibrated with NI-DAQmx 8.3. For other NI 6704 devices, refer to the manual calibration procedure available at ni.com/calibration.

Resolving Compiler Warnings from SynchronizingObject in Visual Studio 2005 or Later

SynchronizingObject has been obsoleted in Measurement Studio class libraries for .NET Framework 2.0 or later. Accessing this property produces compiler warnings. If you were using SynchronizingObject in .NET Framework 1.1, you must update your code to use SynchronizationContext in .NET Framework 2.0 or later. For more information about SynchronizationContext, refer to Events, Callbacks, and Thread Safety in Measurement Studio Class Libraries in the NI-DAQmx .NET Framework 2.0 or later help. You can launch the NI-DAQmx .NET help from the Start menu. The Start menu path is different depending on the version of the .NET Framework you are using. For example, for Visual Studio 2005, you can launch the help from Start»All Programs»National Instruments»NI-DAQ»Text-Based Code Support»NI-DAQmx .NET Framework 2.0 Help.

USB-9xxx Devices

Unplug your USB-9xxx and plug it back in or power the USB device down and up after upgrading NI-DAQmx. If the USB-9xxx is connected to a USB hub, make sure to disconnect the USB-9xxx from the hub, not the hub from the computer. Disconnecting power from the USB device causes installed devices to load the correct version of the firmware.

Virtual TEDS Data for the USB-9233/9237

If you connect hardware TEDS to USB-9233/9237 channels configured with virtual TEDS, the virtual TEDS will be replaced with hardware TEDS data after upgrading to NI-DAQmx 8.6 or later.

Using NI-DAQmx and Traditional NI-DAQ (Legacy) on the Same Computer

Existing applications developed with earlier versions of NI-DAQ will run under Traditional NI-DAQ (Legacy). You can use both the Traditional NI-DAQ (Legacy) API and the NI-DAQmx API on the same computer with the following restrictions:

Only one API controls a given device at one time.

–

After using a device in NI-DAQmx, you must unreserve all NI-DAQmx tasks that are using that device before you can use that device through Traditional NI-DAQ (Legacy). If you use a device in NI-DAQmx and then use it in Traditional NI-DAQ (Legacy) without unreserving the NI-DAQmx tasks, error code -10461 is returned. To unreserve NI-DAQmx tasks, call the DAQmx Clear Task VI or functions.

–

After using a device in Traditional NI-DAQ (Legacy), you must reset the device before you can use that device in NI-DAQmx, or error code -200324 is returned.

For SCXI devices, you must reset the communicating DAQ device in Traditional NI-DAQ (Legacy) before using it in NI-DAQmx. For example, E Series DAQ devices use lines 0, 1, 2, and 4 on port 0 to communicate with the SCXI module. Error code -200158 is returned if you do not reset the communicating device in Traditional NI-DAQ (Legacy) before using it in NI-DAQmx as follows:

Call the Traditional NI-DAQ (Legacy) Device Reset VI or the Init_DA_Brds function
To reset devices in Traditional NI-DAQ (Legacy) from MAX, you must reset all devices at once. Right-click the Traditional NI-DAQ (Legacy) Devices folder in MAX and select Reset Driver for Traditional NI-DAQ (Legacy). For a remote RT target, you must use the Traditional NI-DAQ (Legacy) Device Reset VI.

NI-DAQmx cannot be used with Traditional NI-DAQ 6.9.3 or earlier.
In an SCXI data acquisition system, you must use the same API to program all devices—connected DAQ devices and inserted SCXI modules.

Refer to ni.com/support for details and instructions about the following topics:

How to add NI-DAQmx code to a Traditional NI-DAQ (Legacy) application
How to run both Traditional NI-DAQ (Legacy) applications and NI-DAQmx applications that use the same device

Software Support in NI-DAQmx 9.1Operating System Support

The following operating systems are supported in NI-DAQmx 9.1:

Windows 7 (32-bit and 64-bit)
Windows Vista Business edition (32-bit and 64-bit)
Windows XP, Service Pack 2 or greater
Windows 2000, Service Pack 4 or greater
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

For OS-specific device support information, refer to ni.com/support/daq/versions.

Note Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

Caution If you plan to perform an upgrade of your system from a prior version of Microsoft Windows to Microsoft Windows Vista, you are required to uninstall all National Instruments software prior to performing the upgrade. After the upgrade has been completed, you can reinstall your National Instruments software.

Note National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the Info Code windows7.

NI-DAQmx 9.1 and later supports Phar Lap only with the LabVIEW Real-Time Module 8.2 and later.

Windows NT users must use NI-DAQmx 7.5 or earlier.

Windows Me/98 users must use NI-DAQmx 7.1 or earlier. Windows 95 users must use NI-DAQ 6.9.3 or earlier.

To find and download an earlier version of NI-DAQmx that supports other operating systems, refer to ni.com/downloads.

NI-DAQmx does not support guest accounts on Windows Vista/XP. You must log into an administrative or user account to use NI-DAQmx on these OSes.

Measurement Studio Operating System Support

Measurement Studio system requirements depend on the Visual Studio and .NET Framework versions that you have:

For Visual Studio .NET 2003 and .NET Framework 1.1, you must have Microsoft Windows XP/2000 (SP3 or later).
For Visual Studio 2005 and .NET Framework 2.0, you must have Microsoft Windows 7/Vista/XP/2000 (SP3 or later).
For Visual Studio 2008 and .NET Framework 3.5, you must have Microsoft Windows 7/Vista/XP.

Note If you are using the DAQmx .NET Library, the .NET 1.1 Framework, .NET 2.0 Framework, or .NET 3.5 Framework is required.

NI Application Software Support

The following table lists the NI application software versions supported by NI-DAQmx. If you are not using NI application software, refer to Microsoft Visual Studio Support.

In NI-DAQmx 8.6 and prior, when you add the DAQ Component as a new item to your Visual Studio 2005 project, the DAQ Component is located in the Measurement Studio folder and the Visual Basic Items or Visual C# Project Items folders. In NI-DAQmx 8.7 and later, the DAQ Component is located only in the Visual Basic Items or Visual C# Project Items folder and named NI-DAQ Component.

NI Application Software	Versions Supported by NI-DAQmx and the DAQ Assistant
LabVIEW	8.2.x, 8.5.x, 8.6.x, and 2009
LabVIEW Real-Time Module	8.2.x and later (including 2009 and later)
LabWindows/CVI	8.1 and later (including 2009 and later)
LabWindows/CVI Real-Time Module	8.0.1 and later (including 2009 and later)
Measurement Studio	7.x and later (including 2009 and later)
LabVIEW SignalExpress	3.x and later (including 2009 and later)

Measurement Studio Examples

The directories that the Measurement Studio examples install to depends on which component is installed, the version of Visual Studio or the .NET Framework the example supports, the version of Measurement Studio installed, and the operating system. For detailed information on examples for Measurement Studio, refer to Where To Find Examples in the NI Measurement Studio Help.

Microsoft Visual Studio Support

The following table lists the programming languages and Microsoft Visual Studio versions supported by NI-DAQmx.

Programming Language	Visual Studio Versions Supported by NI-DAQmx
ANSI C	2003 (7.1)1, 2005 (8.0)2, and 2008 (9.0)3
Visual C++	2003 (7.1)1, 2005 (8.0)2, and 2008 (9.0)3
.NET Framework 1.1 Languages (C# and Visual Basic.NET)	2003 (7.1)
.NET Framework 2.0 Languages (C# and Visual Basic.NET)	2005 (8.0)
.NET Framework 3.5 Languages (C# and Visual Basic.NET)	2008 (9.0)
1 Requires Measurement Studio 7.x
2 Requires Measurement Studio 8.0.1 or later
3 Requires Measurement Studio 8.6 or later

Earlier versions of NI-DAQmx support other application software and language versions. To find and download an earlier version of a driver, refer to ni.com/downloads.

LabVIEW SignalExpress

LabVIEW SignalExpress LE gives you a 30-day trial of the full version of LabVIEW SignalExpress. For more information on the trial version, refer to Getting Started with LabVIEW SignalExpress, installed by default at Start»All Programs»National Instruments»LabVIEW SignalExpress.

IP Support for Network DAQ Devices

Network DAQ Devices support Internet Protocol version 4 (IPv4). IPv6 is not supported.

Device Support in NI-DAQmx

The following lists detail the devices supported in NI-DAQmx. Device support is divided into the following categories:

Devices supported in NI-DAQmx
Devices Not Supported in NI-DAQmx on Windows 7/Vista
Devices No Longer Supported in NI-DAQmx 8.3 and Later

For OS-specific device support information, refer to ni.com/support/daq/versions.

For MXI-3 and MXI-4 OS-specific support information, refer to ni.com/kb and search for KnowledgeBase entry 45MA9LF7.

Devices Supported in NI-DAQmx

NI-DAQmx supports the following devices:

NI 9201 C Series 8-channel, ±10 V, 12-bit analog input module
NI 9201 (DSUB)
NI 9203 C Series 8-channel, ±20 mA, 16-bit analog input module
NI 9205 C Series 32-channel, 16-bit analog input module with gain and analog trigger (AI, PFI only)
NI 9206 C Series 32-channel, 16-bit analog input module for fuel cells (AI, PFI only)
NI 9207 C Series 16-channel combination voltage and current analog input module
NI 9208 C Series 16-channel current analog input module
NI 9211 C Series 12 S/s, 24-bit, thermocouple analog input, 4-channel scanned analog input module
NI 9213 C Series 16-channel thermocouple input module
NI 9215 100 kS/s, 16-bit, 4-channel isolated SMIO analog input module
NI 9215 (BNC)
NI 9217 C Series 4-channel, 24-bit, 100 ohm RTD analog input module
NI 9219 C Series 4-channel, 24-bit, universal analog input module
NI 9221 C Series 8-channel, ±60 V, 12-bit analog input module
NI 9221 (DSUB)
NI 9225 C Series 3-channel, ±300 Vrms, 24-Bit simultaneous analog input module
NI 9227 C Series analog input module
NI 9229 C Series 4-channel, ±60 V, 24-bit, simultaneous analog input module
NI 9229 (BNC)
NI 9233 C Series 50 kS/s, 24-bit, 4-channel dynamic signal acquisition module
NI 9234 C Series 4-channel, 51.2 kS/s, 24-bit software selectable IEPE and AC/DC analog input module
NI 9234B C Series analog input module
NI 9235 C Series 8-channel, 24-bit quarter-bridge analog input module
NI 9236 C Series 8-channel, 24-bit quarter-bridge analog input module
NI 9237 C Series 4-channel, 24-bit half/full-bridge analog input module
NI 9237 (DSUB) strain module
NI 9239 C Series 4-channel, ±10 V, 24-bit, simultaneous analog input module
NI 9239 (BNC)
NI 9263 C Series 4-channel analog output module
NI 9263 (BNC)
NI 9264 C Series 16-channel, ±10 V, 16-bit analog voltage output module
NI 9264 (DSUB) AO module
NI 9265 C Series 4-channel, 0-20 mA, 16-bit analog current output module
NI 9269 C Series channel-to-channel isolated 10 V analog output module
NI 9401 C Series 8-channel, bidirectional, nibble-configurable digital I/O module
NI 9402 C Series 4-channel, LVTTL digital I/O module
NI 9403 C Series 32-channel, TTL digital input/output module
NI 9411 C Series 6-channel, differential or TTL digital input module
NI 9421 C Series 8-channel, 24 V digital input module
NI 9421 (DSUB)
NI 9422 C Series 8-channel, 24 V, sinking/sourcing digital input module
NI 9423 C Series 8-channel, 24 V, high-speed digital input module
NI 9425 C Series 32-channel, 24 V, sinking digital input module
NI 9426 C Series 32-channel, 24 V, sourcing digital input module
NI 9435 C Series 4-channel, AC/DC universal digital input module
NI 9472 C Series 8-channel, 24 V digital output module
NI 9472 (DSUB)
NI 9474 C Series 8-channel, 24 V, high-speed, sourcing digital output module
NI 9475 C Series 8-channel, 60 V, high-speed, sourcing digital output module
NI 9476 C Series 32-channel, 24 V, high-speed, sourcing digital output module
NI 9477 C Series 32-channel, 5-60 V, sinking digital output module
NI 9478 C Series 16-channel, 0-50 V, sinking digital output module with programmable current limit
NI 9481 C Series 4-channel Form A SPST Relay digital output module
NI 9485 C Series 8-channel solid-state relay, 60 VDC/30 Vrms, 750 mA module
NI BNC-2096 TEDS device
NI cDAQ-9172 CompactDAQ chassis
NI cDAQ-9174 CompactDAQ chassis
NI cDAQ-9178 CompactDAQ chassis
NI DAQCard-6024E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6036E 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6062E 500 kS/s, 12-bit, 16 analog input channel device
NI DAQCard-6715 for PCMCIA 1 MS/s 12-bit analog output device
NI DAQCard-DIO-24 for PCMCIA 24-channel 5V/TTL/CMOS digital I/O device
NI DAQPad-6015 for USB (does not have NI-DAQmx simulated device capability)
NI DAQPad-6015 for USB (BNC) (does not have NI-DAQmx simulated device capability)
NI DAQPad-6015 for USB (Mass Termination) (does not have NI-DAQmx simulated device capability)
NI DAQPad-6016 for USB (does not have NI-DAQmx simulated device capability)
NI ELVIS II educational design and prototyping platform
NI ELVIS II+ educational design and prototyping platform with high-speed digitizer
NI ENET-9205 analog input module
NI ENET-9206 analog input module
NI ENET-9211 14 S/s, 24-bit, thermocouple analog input, 4-channel scanned analog input module
NI ENET-9213 16-channel, 75 S/s, 24-bit, thermocouple input module
NI ENET-9215 100 kS/s, 16-bit, 4-channel isolated SMIO analog input module
NI ENET-9219 4-channel, 24-bit, universal analog input module
NI ENET-9234 4-channel, 51.2 kS/s, 24-bit software selectable IEPE and AC/DC analog input
NI ENET-9237 4-channel, 24-bit half/full-bridge analog input module
NI ENET-9421 8-channel, 24 V digital input module
NI ENET-9421(DSUB) 8-channel, 24 V digital input module
NI ENET-9472 8-channel, 24 V digital output module
NI ENET-9472(DSUB) 8-channel, 24 V digital output module
NI ENET-9481 4-channel Form A SPST Relay digital output module
NI PCI-4461 204.8 kS/s, 24-bit, 2 analog input channel, 2 analog output channel dynamic signal acquisition TEDS device
NI PCI-4021 switch controller
NI PCI-4462 24-bit, 4 analog input channel dynamic signal acquisition TEDS device
NI PCI-4472 102.4 kS/s, 24-bit, 8 analog input channel dynamic signal acquisition device
NI PCI-4474 102.4 kS/s, 24-bit, 4 analog input channel dynamic signal acquisition device
NI PCI-6010 16 analog input channel device (does not have NI-DAQmx simulated device capability)
NI PCI-6013 200 kS/s, 16-bit, 16 analog input, 8 digital I/O line, two counter/timer device (does not have NI-DAQmx simulated device capability)
NI PCI-6014 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer analog input device (does not have NI-DAQmx simulated device capability)
NI PCI-6023E 200 kS/s, 12-bit, 16 analog input channel, 8 digital I/O line, two counter/timer device
NI PCI-6024E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6025E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 32 digital I/O line, two counter/timer device
NI PCI-6031E 100 kS/s, 16-bit, 64 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6032E 100 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6033E 100 kS/s, 16-bit, 64 analog input channel, 8 digital I/O line, two counter/timer device
NI PCI-6034E 200 kS/s, 16-bit, 16 analog input channel, 8 digital I/O line, two counter/timer device
NI PCI-6035E 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6036E 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6052E 333 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6071E 1.25 MS/s, 12-bit, 64 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-6110 5 MS/s, 12-bit, 4 channel device
NI PCI-6111 5 MS/s, 12-bit, 2 channel device
NI PCI-6115 10 MS/s 12-bit device
NI PCI-6120 800 kS/s, 16-bit, 4 analog input simultaneous-sampling device
NI PCI-6122 500 kS/s, 16-bit S Series device
NI PCI-6123 500 kS/s, 16-bit, 8-channel S Series device
NI PCI-6132 4-channel, 32 MB S Series device
NI PCI-6133 3 MS/s, 14-bit, 8 analog input channel S Series device
NI PCI-6143 250 kS/s, 16-bit, 8 analog input channel S Series device
NI PCI-6154 4 analog input channel, 4 analog output channel, 16-bit isolated S Series device
NI PCI-6220 16 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6221 (68-pin) 16 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6221 (37-pin) 16 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6224 32 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6225 80 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6229 32 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6230 bank isolated, 8 analog input channel, 250 kS/s, 16-bit M Series device
NI PCI-6232 250 kS/s, 16-bit, 16 single-ended or 8 differential analog input channel isolated M Series device
NI PCI-6233 250 kS/s, 16-bit, 16 single-ended or 8 differential analog input channel isolated M Series device
NI PCI-6236 250 kS/s, 4 differential analog input (current input) channel M Series device
NI PCI-6238 250 kS/s, 8 differential analog input (current input) channel isolated M Series device
NI PCI-6239 250 kS/s, 8 differential analog input (current input) channel isolated M Series device
NI PCI-6250 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PCI-6251 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PCI-6254 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PCI-6255 80 analog input channel, 1.25 MS/s, 16-bit M Series device
NI PCI-6259 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PCI-6280 16 analog input channel, 500 kS/s, 18-bit M Series device
NI PCI-6281 16 analog input channel, 500 kS/s, 18-bit M Series device
NI PCI-6284 32 analog input channel, 500 kS/s, 18-bit M Series device
NI PCI-6289 32 analog input channel, 500 kS/s, 18-bit M Series device
NI PCI-6503 24-channel 5V/TTL/CMOS digital I/O device
NI PCI-6509 industrial 96-channel 5V/TTL/CMOS digital I/O device with high current (24 mA)
NI PCI-6510 digital I/O device
NI PCI-6511 digital I/O device
NI PCI-6512 digital I/O device
NI PCI-6513 digital I/O device
NI PCI-6514 digital I/O device
NI PCI-6515 industrial 32 source/sink digital input, 32 sink digital output bank isolated digital I/O device
NI PCI-6516 digital I/O device
NI PCI-6517 digital I/O device
NI PCI-6518 digital I/O device
NI PCI-6519 digital I/O device
NI PCI-6520 relay board
NI PCI-6521 relay board
NI PCI-6527 24 digital input, 24 digital output CH/CH isolated digital I/O device
NI PCI-6528 industrial 24 digital input, 24 digital output CH/CH isolated digital I/O device
NI PCI-6533 (DIO-32HS) 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking device
NI PCI-6534 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking device with onboard memory
NI PCI-6601 counter/timer device
NI PCI-6602 counter/timer device
NI PCI-6624 industrial 8-channel CH/CH isolated counter/timer device
NI PCI-6703 16-bit analog output device
NI PCI-6704 16-bit analog output device
NI PCI-6711 1 MS/s, 12-bit, 4 channel analog output device
NI PCI-6713 1 MS/s, 12-bit, 8 channel analog output device
NI PCI-6722 13-bit, 8 channel analog output device
NI PCI-6723 13-bit, 32 channel analog output device
NI PCI-6731 1 MS/s, 16-bit, 4 channel analog output device
NI PCI-6733 1 MS/s, 16-bit, 8 channel analog output device
NI PCI-DIO-96 96-channel parallel digital I/O device
NI PCI-MIO-16E-1 (PCI-6070) 12-bit, 1.25 MS/s, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-MIO-16E-4 (PCI-6040E) 500 kS/s (1-channel), 250 kS/s (multichannel), 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-MIO-16XE-10 (PCI-6030E) 100 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCI-MIO-16XE-50 20 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PCIe-6251 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PCIe-6259 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PCIe-6320 16 analog input channel, 250 kS/s, 16-bit X Series device
NI PCIe-6321 16 analog input channel, 250 kS/s, 16-bit X Series device
NI PCIe-6323 32 analog input channel, 250 kS/s, 16-bit X Series device
NI PCIe-6341 16 analog input channel, 500 kS/s, 16-bit X Series device
NI PCIe-6343 32 analog input channel, 500 kS/s, 16-bit X Series device
NI PCIe-6351 16 analog input channel, 1.25 MS/s, 16-bit X Series device
NI PCIe-6353 32 analog input channel, 1.25 MS/s, 16-bit X Series device
NI PCIe-6361 16 analog input channel, 2 MS/s, 16-bit X Series device
NI PCIe-6363 32 analog input channel, 2 MS/s, 16-bit X Series device
NI PCIe-6535 10 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI PCIe-6536 25 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI PCIe-6537 50 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI PXI-1010 8-slot PXI backplane with a 4-slot SCXI backplane chassis
NI PXI-1011 4-slot PXI backplane with a 8-slot SCXI backplane chassis
NI PXI-2501 FET multiplexer
NI PXI-2503 relay multiplexer
NI PXI-2510 68-Channel 2A fault insertion unit
NI PXI-2512 7-Channel 10A fault insertion unit
NI PXI-2514 7-Channel 40A fault insertion unit
NI PXI-2515 high-speed digital I/O signal insertion switch
NI PXI-2531 512-crosspoint matrix
NI PXI-2527 32x1 relay multiplexer
NI PXI-2529 128-crosspoint relay matrix
NI PXI-2530 128-channel reed relay multiplexer/matrix
NI PXI-2532 512-crosspoint matrix
NI PXI-2533 256-crosspoint 4x64 SSR matrix
NI PXI-2534 256-crosspoint 8x32 SSR matrix
NI PXI-2535 544-crosspoint 4x136 FET matrix
NI PXI-2536 544-crosspoint 8x68 FET matrix
NI PXI-2545 2.7 GHz 4x1 terminated 50 ohm multiplexer
NI PXI-2546 2.7 GHz dual 4x1 50 ohm multiplexer
NI PXI-2547 2.7 GHz 8x1 50 ohm multiplexer
NI PXI-2548 2.7 GHz 4-SPDT 50 ohm relay module
NI PXI-2549 2.7 GHz terminated 2-SPDT 50 ohm relay module
NI PXI-2554 2.5 GHz 4x1 75 ohm multiplexer
NI PXI-2555 2.5 GHz 4x1 terminated 75 ohm multiplexer
NI PXI-2556 2.5 GHz dual 4x1 75 ohm multiplexer
NI PXI-2557 2.5 GHz 8x1 75 ohm multiplexer
NI PXI-2558 2.5 GHz 4-SPDT 75 ohm relay module
NI PXI-2559 2.5 GHz terminated 2-SPDT 75 ohm relay module
NI PXI-2564 16-SPST relay module
NI PXI-2565 16-SPST relay module
NI PXI-2566 16-SPDT relay module
NI PXI-2567 64-channel relay driver
NI PXI-2568 31-channel SPST relay module
NI PXI-2569 100-channel SPST relay module
NI PXI-2570 40-SPDT relay module
NI PXI-2575 196x1 relay multiplexer
NI PXI-2576 multi-bank multiplexer
NI PXI-2584 high-voltage multiplexer
NI PXI-2585 10-channel multiplexer
NI PXI-2586 10-channel SPST relay module
NI PXI-2590 1x4 1.3 GHz multiplexer
NI PXI-2591 1x4 4 GHz multiplexer
NI PXI-2593 500 MHz dual 8x1 50 ohm multiplexer
NI PXI-2594 1x4 2.5 GHz multiplexer
NI PXI-2595 1x4 5.5 GHz multiplexer
NI PXI-2596 dual 1x6 26.5 GHz multiplexer
NI PXI-2597 1x6 26.5 GHz terminated multiplexer
NI PXI-2598 dual 26.5 GHz transfer switch
NI PXI-2599 dual 26.5 GHz SPDT
NI PXI-4021 switch controller
NI PXI-4200 integrated signal conditioning module
NI PXI-4204 8-channel 100 V analog input module
NI PXI-4220 2-channel high-speed strain module
NI PXI-4224 signal conditioning module
NI PXI-4461 204.8 kS/s, 24-bit, 2 analog input channel, 2 analog output channel dynamic signal acquisition device
NI PXI-4462 24-bit, 4 analog input channel dynamic signal acquisition TEDS device
NI PXI-4472 102.4 kS/s, 24-bit, 8 analog input channel dynamic signal acquisition device
NI PXI-4472B 102.4 kS/s, 24-bit, 8 analog input channel dynamic signal acquisition device
NI PXI-4495 204.8 kS/s, 24-Bit, 16 AI channel dynamic signal acquisition device
NI PXI-4496 204.8 kS/s, 24-bit, 16 AI channel, AC-coupled, IEPE DSA device
NI PXI-4498 16 AI channel, 204.8 kS/s, 24-bit, AC-coupled, IEPE DSA device
NI PXI-6025E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 32 digital I/O line, two counter/timer device
NI PXI-6030E 100 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6031E 100 kS/s, 16-bit, 64 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6040E 500 kS/s (1-channel), 250 kS/s (multichannel), 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6052E 333 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6070E 1.25 MS/s, 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6071E 1.25 MS/s, 12-bit, 64 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI PXI-6115 10 MS/s, 12-bit device
NI PXI-6120 800 kS/s, 16-bit, 4 analog input simultaneous-sampling device
NI PXI-6122 500 kS/s, 16-bit S Series device
NI PXI-6123 500 kS/s, 16-bit, 8-channel S Series device
NI PXIe-6124 4 MS/s, 16-bit, 4 analog input channel, 2 analog output channel S Series device
NI PXI-6132 4-channel, 32 MB S Series device
NI PXI-6133 3 MS/s, 14-bit, 8 analog input channel S Series device
NI PXI-6143 250 kS/s, 16-bit, 8 analog input channel S Series device
NI PXI-6220 16 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6221 (68-pin) 16 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6224 32 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6225 80 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6229 32 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6230 bank isolated, 8 analog input channel, 250 kS/s, 16-bit M Series device
NI PXI-6232 250 kS/s, 16-bit, 16 single-ended or 8 differential analog input channel isolated M Series device
NI PXI-6233 250 kS/s, 16-bit, 16 single-ended or 8 differential analog input channel isolated M Series device
NI PXI-6236 250 kS/s, 4 differential analog input (current input) channel M Series device
NI PXI-6238 250 kS/s, 8 differential analog input (current input) channel isolated M Series device
NI PXI-6239 250 kS/s, 8 differential analog input (current input) channel isolated M Series device
NI PXI-6250 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PXI-6251 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PXI-6254 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PXI-6255 80 analog input channel, 1.25 MS/s, 16-bit M Series device
NI PXI-6259 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PXI-6280 16 analog input channel, 500 kS/s, 18-bit M Series device
NI PXI-6281 16 analog input channel, 500 kS/s, 18-bit M Series device
NI PXI-6284 32 analog input channel, 500 kS/s, 18-bit M Series device
NI PXI-6289 32 analog input channel, 500 kS/s, 18-bit M Series device
NI PXI-6508 96-channel 5V/TTL/CMOS digital I/O device
NI PXI-6509 industrial 96-channel 5V/TTL/CMOS digital I/O device with high current (24 mA)
NI PXI-6511 digital I/O device
NI PXI-6512 digital I/O device
NI PXI-6513 digital I/O device
NI PXI-6514 industrial 32 source/sink digital input, 32 source digital output bank isolated digital I/O device
NI PXI-6515 industrial 32 source/sink digital input, 32 sink digital output bank isolated digital I/O device
NI PXI-6520 relay board
NI PXI-6521 relay board
NI PXI-6527 24 digital input, 24 digital output CH/CH isolated digital I/O device
NI PXI-6528 industrial 24 digital input, 24 digital output CH/CH isolated digital I/O device
NI PXI-6529 industrial 48 digital input, isolated digital I/O device
NI PXI-6533 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking device
NI PXI-6534 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking device with onboard memory
NI PXI-6602 counter/timer device
NI PXI-6608 counter/timer device
NI PXI-6624 counter/timer device
NI PXI-6704 16-bit analog output device
NI PXI-6711 1 MS/s, 12-bit, 4 channel analog output device
NI PXI-6713 1 MS/s, 12-bit, 8 channel analog output device
NI PXI-6722 13-bit, 8 channel analog output device
NI PXI-6723 13-bit, 32 channel analog output device
NI PXI-6733 1 MS/s, 16-bit, 8 channel analog output device
NI PXIe-2512 7-Channel 10A fault insertion unit
NI PXIe-2514 7-Channel 40A fault insertion unit
NI PXIe-2515 high-speed digital I/O signal insertion switch
NI PXIe-2527 32x1 relay multiplexer
NI PXIe-2529 128-crosspoint relay matrix
NI PXIe-2531 512-crosspoint matrix
NI PXIe-2532 512-crosspoint matrix
NI PXIe-2569 100-channel SPST relay module
NI PXIe-2575 196x1 Relay Multiplexer
NI PXIe-2593 500 MHz dual 8x1 50 ohm multiplexer
NI PXIe-4300 8-channel simultaneously sampling analog input device
NI PXIe-4330 8-channel, 25.6 kS/s strain device
NI PXIe-4331 8-channel, 102.4 kS/s strain device
NI PXIe-4353 32-channel thermocouple device
NI PXIe-4496 16 AI channel, 204.8 kS/s, 24-bit, AC-coupled, IEPE DSA device
NI PXIe-4498 16 AI channel, 204.8 kS/s, 24-bit, AC-coupled, IEPE DSA device
NI PXIe-6251 16 analog input channel, 1 MS/s, 16-bit M Series device
NI PXIe-6259 32 analog input channel, 1 MS/s, 16-bit M Series device
NI PXIe-6341 16 analog input channel, 500 kS/s, 16-bit X Series device
NI PXIe-6356 8 analog input channel, 1.25 MS/s, 16-bit X Series device
NI PXIe-6358 16 analog input channel, 1.25 MS/s, 16-bit X Series device
NI PXIe-6361 16 analog input channel, 2 MS/s, 16-bit X Series device
NI PXIe-6363 32 analog input channel, 2 MS/s, 16-bit X Series device
NI PXIe-6366 8 analog input channel, 2 MS/s, 16-bit X Series device
NI PXIe-6368 16 analog input channel, 2 MS/s, 16-bit X Series device
NI PXIe-6535 10 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI PXIe-6536 25 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI PXIe-6537 50 MHz, 5.0/3.3/2.5 V high-speed digital I/O device
NI SC-2350 TEDS device
NI SCXI-1000 4-slot chassis
NI SCXI-1000DC 4-slot DC-powered chassis
NI SCXI-1001 12-slot chassis
NI SCXI-1100 32-channel analog input module
NI SCXI-1102 thermocouple amplifier module
NI SCXI-1102B/C amplifier multiplexer module
NI SCXI-1104/C multiplexer module
NI SCXI-1112 thermocouple amplifier module
NI SCXI-1120/D isolation amplifier module
NI SCXI-1121 isolation amplifier with excitation module
NI SCXI-1122 isolated multiplexer amplifier module
NI SCXI-1124 analog output module
NI SCXI-1125 isolation amplifier module
NI SCXI-1126 isolated frequency input channel module
NI SCXI-1127 32-channel relay multiplexer/matrix
NI SCXI-1128 32-channel SSR multiplexer/matrix
NI SCXI-1129 256-crosspoint relay matrix
NI SCXI-1130 256-channel reed relay multiplexer/matrix
NI SCXI-1140 track-and-hold module
NI SCXI-1141 lowpass filter module
NI SCXI-1142 lowpass filter module
NI SCXI-1143 lowpass filter module
NI SCXI-1160 16-SPDT general-purpose relay module
NI SCXI-1161 8-SPDT power relay module
NI SCXI-1162 digital I/O module
NI SCXI-1162HV digital I/O module
NI SCXI-1163 digital I/O module
NI SCXI-1163R 32-channel solid state relay
NI SCXI-1166 32-SPDT relay module
NI SCXI-1167 64-channel relay driver
NI SCXI-1169 100-channel SPST relay module
NI SCXI-1175 196x1 relay multiplexer
NI SCXI-1190 1.3 GHz quad 4x1 50 ohm multiplexer
NI SCXI-1191 4 GHz quad 4x1 50 ohm multiplexer
NI SCXI-1192 18 GHz 8-SPDT 50 ohm relay module
NI SCXI-1193 quad 8x1 50 ohm multiplexer
NI SCXI-1194 quad 1x4 2.5 GHz multiplexer
NI SCXI-1195 quad 1x4 5.5 GHz multiplexer
NI SCXI-1314T TEDS device
NI SCXI-1502 thermocouple amplifier module
NI SCXI-1503 16-channel RTD input module
NI SCXI-1520 strain gage input module
NI SCXI-1521/B signal conditioning module
NI SCXI-1530 module for accelerometers and microphones
NI SCXI-1531 module for accelerometers and microphones
NI SCXI-1540 linear variable differential transformers (LVDT) module
NI SCXI-1581 current excitation analog output module
NI SCXI-1600 USB module (does not have NI-DAQmx simulated device capability)
NI USB-4431 24-bit, 4 analog input, 1 analog output device.
NI USB-4432 24-bit, 5 analog input device.
NI USB-6008 (does not have NI-DAQmx simulated device capability)
NI USB-6009 (does not have NI-DAQmx simulated device capability)
NI USB-6210 250 kS/s (aggregate), 16-bit, 16 single-ended or 8 differential analog input channel M Series device
NI USB-6211 250 kS/s (aggregate), 16-bit, 16 single-ended or 8 differential analog input channel, 2 analog output channel M Series device
NI USB-6212 400 kS/s (aggregate), 16-bit, 16 single-ended or 8 differential analog input channel, 2 analog output channel, 32 digital I/O channel M Series device
NI USB-6212 BNC 16 analog input channel, 400 kS/s, 16-bit M Series device
NI USB-6212 Mass Termination M Series device
NI USB-6215 250 kS/s (aggregate), 16-bit, 16 single-ended or 8 differential analog input channel, 2 analog output channel Isolated M Series device
NI USB-6216 400 kS/s (aggregate), 16-bit, 16 single-ended or 8 differential analog input channel, 2 analog output channel, 32 digital I/O channel, Isolated M Series device
NI USB-6216 BNC 16 analog input channel, 400 kS/s, 16-bit Isolated M Series device
NI USB-6216 400 kS/s Mass Termination Isolated M Series device
NI USB-6218 250 kS/s (aggregate), 16-bit, 32 single-ended or 16 differential analog input channel, 4 analog output channel Isolated M Series device
NI USB-6218 BNC 32 analog input channel, 250 kS/s, 16-bit Isolated M Series device
NI USB-6221 BNC, 16 analog input channel, 250 kS/s, 16-bit M Series device
NI USB-6221 Screw Terminal
NI USB-6225 Mass Termination 80 analog input channel, 250 kS/s, 16-bit M Series device (does not have NI-DAQmx simulated device capability)
NI USB-6225 Screw Terminal
NI USB-6229 BNC, 32 analog input channel, 250 kS/s, 16-bit M Series device
NI USB-6229 Screw Terminal
NI USB-6251 BNC, 16 analog input channel, 1 MS/s, 16-bit M Series device
NI USB-6251 Mass Termination
NI USB-6251 Screw Terminal
NI USB-6255 Mass Termination 80 analog input channel, 1.25 MS/s, 16-bit M Series device (does not have NI-DAQmx simulated device capability)
NI USB-6255 Screw Terminal
NI USB-6259 BNC, 32 analog input channel, 1 MS/s, 16-bit M Series device
NI USB-6259 Mass Termination
NI USB-6259 Screw Terminal
NI USB-6281 Mass Termination 16 analog input channel, 500 kS/s, 18-bit M Series device
NI USB-6281 Screw Terminal
NI USB-6289 Mass Termination 32 analog input channel, 500 kS/s, 18-bit M Series device
NI USB-6289 Screw Terminal
NI USB-6501 (does not have NI-DAQmx simulated device capability)
NI USB-6509 industrial 96-channel 5V/TTL/CMOS digital I/O device with high current (24 mA)
NI USB-6525 (does not have NI-DAQmx simulated device capability)
NI USB-9201 500 kS/s, 12-bit, 8-channel scanned analog input device
NI USB-9211A 12 S/s, 24-bit, thermocouple analog input, 4-channel scanned analog input device
NI USB-9213 thermocouple input device
NI USB-9215A 100 kS/s, 16-bit, 4-channel isolated SMIO analog input device
NI USB-9219 C Series 4-channel, 24-bit, universal analog input module
NI USB-9221 8-channel scanned analog input device
NI USB-9229 C Series 4-channel, ±60 V, 24-bit, simultaneous analog input module
NI USB-9229 (BNC)
NI USB-9233 50 kS/s, 24-bit, 4-channel dynamic signal acquisition device
NI USB-9234 51.2 kS/s, 24-bit, 4-channel dynamic signal acquisition device
NI USB-9237 4-channel, 24 bit half/full-bridge analog input module
NI USB-9239 C Series 4-channel, ±10 V, 24-bit, simultaneous analog input module
NI USB-9239 (BNC)
NI USB-9263 10 V analog output module
NI USB-9264 16-channel, ±10 V, 16-bit analog voltage output module
NI USB-9265 4-channel, 0-20 mA, 16-bit analog current output module
NI USB-9421 8-channel digital input module
NI USB-9472 8-channel digital output module
NI USB-9481 4-channel Form A SPST Relay digital output module
NI USB-TC01 1-channel thermocouple device
NI WLS-9206 802.11 b/g wireless analog input module
NI WLS-9206 802.11 b/g wireless analog input module
NI WLS-9211 14 S/s, 24-bit, thermocouple analog input, 4-channel scanned 802.11 b/g wireless analog input module
NI WLS-9213 16-channel, 75 S/s, 24-bit, thermocouple input 802.11 b/g wireless module
NI WLS-9215 100 kS/s, 16-bit, 4-channel isolated SMIO 802.11 b/g wireless analog input module
NI WLS-9219 4-channel, 24-bit, universal 802.11 b/g wireless analog input module
NI WLS-9234 4-channel, 51.2 kS/s, 24-bit software selectable IEPE and AC/DC 802.11 b/g wireless analog input module
NI WLS-9237 4-channel, 24-bit half/full-bridge 802.11 b/g wireless analog input module
NI WLS-9421 8-channel, 24 V 802.11 b/g wireless digital input module
NI WLS-9421(DSUB) 8-channel, 24 V 802.11 b/g wireless digital input module
NI WLS-9472 8-channel, 24 V 802.11 b/g wireless digital output module
NI WLS-9472(DSUB) 8-channel, 24 V 802.11 b/g wireless digital output module
NI WLS-9481 4-channel Form A SPST Relay 802.11 b/g wireless digital output module
SensorDAQ (does not have NI-DAQmx simulated device capability)

Devices Not Supported in NI-DAQmx on Windows 7/Vista

The following devices are not supported in NI-DAQmx on Windows 7, Windows Vista, the 32-bit version, or on Windows Vista x64, the 64-bit version:

NI DAQPad-6015 for USB
NI DAQPad-6015 for USB (BNC)
NI DAQPad-6015 for USB (Mass Termination)
NI DAQPad-6016 for USB

The following devices are not supported in NI-DAQmx on Windows 7/Vista (32-bit and 64-bit versions):

NI DAQCard-6024E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6036E 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6062E 500 kS/s, 12-bit, 16 analog input channel device
NI DAQCard-6715 for PCMCIA 1 MS/s 12-bit analog output device
NI DAQCard-DIO-24 for PCMCIA 24-channel 5V/TTL/CMOS digital I/O device
NI SCXI-1600 USB module

Devices No Longer Supported in NI-DAQmx 8.3 and Later

The following products are not supported in NI-DAQmx 8.3 and later and will not be supported in future versions of NI-DAQmx:

NI PCI-7041/6040E device for LabVIEW RT is supported in NI-DAQmx 8.1 and earlier.

Note The NI PXI-6040E and NI PCI-MIO-16E-4 continue to be supported in NI-DAQmx.

System RequirementsDevelopment

Minimum Processor	Pentium III/Celeron 600 MHz or Equivalent
RAM	128 MB
Screen resolution	800 x 600 pixels
Operating system	Windows 7/Vista/XP/2000

Recommended Processor	Pentium 4 or Equivalent
RAM	256 MB
Screen resolution	1024 x 768 pixels
Operating system	Windows 7/Vista/XP/2000

Deployment

Minimum Processor	Pentium 200 MHz or Equivalent
RAM	64 MB
Screen resolution	800 x 600 pixels or no screen
Operating system	Windows 7/Vista/XP/2000

Recommended Processor	Pentium III/Celeron 600 MHz or Equivalent
RAM	256 MB
Screen resolution	1024 x 768 pixels or no screen
Operating system	Windows 7/Vista/XP/2000

You must have Internet Explorer version 5.0 or later to use some features of the NI-DAQmx 7.x and later documentation, including the help system and Device Document Browser.

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

账号		自动登录	找回密码
密码			注册会员

[Patch补丁] NI-DAQmx 9.1 Patch Win32/64中文/德语/日语/法语/英文/韩语 NI-DAQmx9.1补丁下载

注册登陆后可查看附件和大图，以及购买相关内容

相关帖子

客服中心

电话咨询

投诉建议